{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/40752"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/40752","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"The effect of lateral bracing on the dynamic response of wood floor systems","abstract":"This thesis presents the results of an extensive study of several types of lateral bracing for solid-sawn and parallel-chord truss floor systems. Three solid-sawn floor bracing systems were evaluated: X-bridging, full-depth solid blocking, and finally, post-tensioned solid-blocking. Five different truss bracing systems were investigated: bottom-chord bracing, steel X-bracing, strong-back bracing, and the bracing combinations of X-plus bottom-chord bracing, and strong-back plus bottom chord bracing were evaluated. A total of seven, 4.9m x 4.9m floor specimens were constructed. Four 38 x 286 mm (2 x 12 inch nominal), solid-sawn wood joist floors were constructed for evaluation of the solid-sawn bracing systems. Three 305 mm (12 inch) deep, bottom-chord bearing, metal plate connected, parallel-chord truss floors were constructed to evaluate the truss floor bracing systems. Both floor systems utilized joist/truss spacings of 610 mm (24 inches) on center, and were covered with 18.3 mm (23/32 inch) thick, tongue-in-groove, plywood sheathing. The bracing systems were evaluated at different live load levels and boundary conditions. The bracing systems were subjected to both static and dynamic loadings. The effect of the bracing systems were determined based on four parameters: one static, and three dynamic. The percent change in concentrated load carried by the loaded joist was used as the static test parameter. The effect, if any, of the bracing systems on the modal resonant frequencies, separation of frequencies, and damping characteristics of the floor systems, were used as dynamic parameters. Future research and design recommendations were given in the conclusion chapter.","abstract_html":"This thesis presents the results of an extensive study of several types of lateral bracing for solid-sawn and parallel-chord truss floor systems. Three solid-sawn floor bracing systems were evaluated: X-bridging, full-depth solid blocking, and finally, post-tensioned solid-blocking. Five different truss bracing systems were investigated: bottom-chord bracing, steel X-bracing, strong-back bracing, and the bracing combinations of X-plus bottom-chord bracing, and strong-back plus bottom chord bracing were evaluated. A total of seven, 4.9m x 4.9m floor specimens were constructed. Four 38 x 286 mm (2 x 12 inch nominal), solid-sawn wood joist floors were constructed for evaluation of the solid-sawn bracing systems. Three 305 mm (12 inch) deep, bottom-chord bearing, metal plate connected, parallel-chord truss floors were constructed to evaluate the truss floor bracing systems. Both floor systems utilized joist/truss spacings of 610 mm (24 inches) on center, and were covered with 18.3 mm (23/32 inch) thick, tongue-in-groove, plywood sheathing. The bracing systems were evaluated at different live load levels and boundary conditions. The bracing systems were subjected to both static and dynamic loadings. The effect of the bracing systems were determined based on four parameters: one static, and three dynamic. The percent change in concentrated load carried by the loaded joist was used as the static test parameter. The effect, if any, of the bracing systems on the modal resonant frequencies, separation of frequencies, and damping characteristics of the floor systems, were used as dynamic parameters. Future research and design recommendations were given in the conclusion chapter.","abstract_has_math":false,"creators":["Stark, John W."],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Civil Engineering","degree_department":"Civil Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1993,"date_issued":"1993","date_published":"1993","updated_at":"2026-11-18T20:17:59Z","subjects":["Brackets","Flooring, Wooden","Trusses"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-01242009-063313"],"render_values":[{"text":"etd-01242009-063313","href":null,"code":true}]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-01242009-063313/"],"render_values":[{"text":"http://scholar.lib.vt.edu/theses/available/etd-01242009-063313/","href":"http://scholar.lib.vt.edu/theses/available/etd-01242009-063313/","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/40752","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/40752","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F40752","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.department","label":"Department","values":["Civil Engineering"]},{"key":"dc:creator","label":"Author","values":["Stark, John W."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accepted","label":"Dc Date Accepted","values":["2009-01-24"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:27:45Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:27:45Z","2009-01-24"]},{"key":"dc:date.issued","label":"Date","values":["1993"]},{"key":"dc:date.submitted","label":"Dc Date Submitted","values":["2009-01-24"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:relation.haspart","label":"Dc Relation Haspart","values":["LD5655.V855_1993.S737.pdf"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 28703844"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Civil Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V855 1993.S737"]},{"key":"dc:subject.lcsh","label":"Dc Subject Lcsh","values":["Brackets","Flooring, Wooden","Trusses"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-01242009-063313"]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-01242009-063313/"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/40752"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This thesis presents the results of an extensive study of several types of lateral bracing for solid-sawn and parallel-chord truss floor systems. Three solid-sawn floor bracing systems were evaluated: X-bridging, full-depth solid blocking, and finally, post-tensioned solid-blocking. Five different truss bracing systems were investigated: bottom-chord bracing, steel X-bracing, strong-back bracing, and the bracing combinations of X-plus bottom-chord bracing, and strong-back plus bottom chord bracing were evaluated. A total of seven, 4.9m x 4.9m floor specimens were constructed. Four 38 x 286 mm (2 x 12 inch nominal), solid-sawn wood joist floors were constructed for evaluation of the solid-sawn bracing systems. Three 305 mm (12 inch) deep, bottom-chord bearing, metal plate connected, parallel-chord truss floors were constructed to evaluate the truss floor bracing systems. Both floor systems utilized joist/truss spacings of 610 mm (24 inches) on center, and were covered with 18.3 mm (23/32 inch) thick, tongue-in-groove, plywood sheathing. The bracing systems were evaluated at different live load levels and boundary conditions. The bracing systems were subjected to both static and dynamic loadings. The effect of the bracing systems were determined based on four parameters: one static, and three dynamic. The percent change in concentrated load carried by the loaded joist was used as the static test parameter. The effect, if any, of the bracing systems on the modal resonant frequencies, separation of frequencies, and damping characteristics of the floor systems, were used as dynamic parameters. Future research and design recommendations were given in the conclusion chapter."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xvi, 165 leaves"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["The effect of lateral bracing on the dynamic response of wood floor systems"]}]}],"canonical_facts":{"dc:contributor.department":["Civil Engineering"],"dc:creator":["Stark, John W."],"dc:date.accepted":["2009-01-24"],"dc:date.accessioned":["2014-03-14T21:27:45Z"],"dc:date.available":["2014-03-14T21:27:45Z","2009-01-24"],"dc:date.issued":["1993"],"dc:date.submitted":["2009-01-24"],"dc:description.abstract":["This thesis presents the results of an extensive study of several types of lateral bracing for solid-sawn and parallel-chord truss floor systems. Three solid-sawn floor bracing systems were evaluated: X-bridging, full-depth solid blocking, and finally, post-tensioned solid-blocking. Five different truss bracing systems were investigated: bottom-chord bracing, steel X-bracing, strong-back bracing, and the bracing combinations of X-plus bottom-chord bracing, and strong-back plus bottom chord bracing were evaluated. A total of seven, 4.9m x 4.9m floor specimens were constructed. Four 38 x 286 mm (2 x 12 inch nominal), solid-sawn wood joist floors were constructed for evaluation of the solid-sawn bracing systems. Three 305 mm (12 inch) deep, bottom-chord bearing, metal plate connected, parallel-chord truss floors were constructed to evaluate the truss floor bracing systems. Both floor systems utilized joist/truss spacings of 610 mm (24 inches) on center, and were covered with 18.3 mm (23/32 inch) thick, tongue-in-groove, plywood sheathing. The bracing systems were evaluated at different live load levels and boundary conditions. The bracing systems were subjected to both static and dynamic loadings. The effect of the bracing systems were determined based on four parameters: one static, and three dynamic. The percent change in concentrated load carried by the loaded joist was used as the static test parameter. The effect, if any, of the bracing systems on the modal resonant frequencies, separation of frequencies, and damping characteristics of the floor systems, were used as dynamic parameters. Future research and design recommendations were given in the conclusion chapter."],"dc:description.degree":["Master of Science"],"dc:format.extent":["xvi, 165 leaves"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-01242009-063313"],"dc:identifier.sourceurl":["http://scholar.lib.vt.edu/theses/available/etd-01242009-063313/"],"dc:identifier.uri":["http://hdl.handle.net/10919/40752"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:relation.haspart":["LD5655.V855_1993.S737.pdf"],"dc:relation.isformatof":["OCLC# 28703844"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject.lcc":["LD5655.V855 1993.S737"],"dc:subject.lcsh":["Brackets","Flooring, Wooden","Trusses"],"dc:title":["The effect of lateral bracing on the dynamic response of wood floor systems"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Civil Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:17:59Z"}