{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/44360"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/44360","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Effects of shock wave passing on turbine blade heat transfer in a transonic turbine cascade","abstract":"The effects of a shock wave passing through a blade passage on surface heat transfer to turbine blades were measured experimentally. The experiments were performed in a transonic linear cascade which matched engine Reynolds number, Mach number, and shock strength. Unsteady heat flux measurements were made with Heat Flux Microsensors on both the pressure and suction surfaces of a single blade passage. Unsteady static pressure measurements were made using Kulite pressure transducers on the blade surface and end walls of the cascade. The experiments were conducted in a stationary linear cascade of blades with heated transonic air flow using a shock tube to introduce shock waves into the cascade. A time-resolved model based on conduction in the gas was found to accurately predict heat transfer due to shock heating measured during experimental tests without flow. The model under-predicted the experimental results with flow, however, by a factor of three. The heat transfer increase resulting from shock passing in heated flow averaged over 200 its (typical blade passing period) was found to be a maximum of 60% on the pressure surface near the leading edge. Based on experimental results at different flow temperatures, it was determined that shock heating has the primary effect on heat transfer, while heat transfer increase due to boundary layer disturbance is small.","abstract_html":"The effects of a shock wave passing through a blade passage on surface heat transfer to turbine blades were measured experimentally. The experiments were performed in a transonic linear cascade which matched engine Reynolds number, Mach number, and shock strength. Unsteady heat flux measurements were made with Heat Flux Microsensors on both the pressure and suction surfaces of a single blade passage. Unsteady static pressure measurements were made using Kulite pressure transducers on the blade surface and end walls of the cascade. The experiments were conducted in a stationary linear cascade of blades with heated transonic air flow using a shock tube to introduce shock waves into the cascade. A time-resolved model based on conduction in the gas was found to accurately predict heat transfer due to shock heating measured during experimental tests without flow. The model under-predicted the experimental results with flow, however, by a factor of three. The heat transfer increase resulting from shock passing in heated flow averaged over 200 its (typical blade passing period) was found to be a maximum of 60% on the pressure surface near the leading edge. Based on experimental results at different flow temperatures, it was determined that shock heating has the primary effect on heat transfer, while heat transfer increase due to boundary layer disturbance is small.","abstract_has_math":false,"creators":["Nix, Andrew Carl"],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Mechanical Engineering","degree_department":"Mechanical Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1996,"date_issued":"1996","date_published":"1996","updated_at":"2026-11-18T20:05:35Z","subjects":["shock wave","turbine","Heat--Transmission","transonic cascade"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-08222008-063734"],"render_values":[{"text":"etd-08222008-063734","href":null,"code":true}]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-08222008-063734/"],"render_values":[{"text":"http://scholar.lib.vt.edu/theses/available/etd-08222008-063734/","href":"http://scholar.lib.vt.edu/theses/available/etd-08222008-063734/","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/44360","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/44360","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F44360","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.department","label":"Department","values":["Mechanical Engineering"]},{"key":"dc:creator","label":"Author","values":["Nix, Andrew Carl"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accepted","label":"Dc Date Accepted","values":["2008-08-22"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:43:18Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:43:18Z","2008-08-22"]},{"key":"dc:date.issued","label":"Date","values":["1996"]},{"key":"dc:date.submitted","label":"Dc Date Submitted","values":["2008-08-22"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:relation.haspart","label":"Dc Relation Haspart","values":["LD5655.V855_1996.N59.pdf"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 36801844"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["shock wave","turbine","Heat--Transmission","transonic cascade"]},{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V855 1996.N59"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-08222008-063734"]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-08222008-063734/"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/44360"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The effects of a shock wave passing through a blade passage on surface heat transfer to turbine blades were measured experimentally. The experiments were performed in a transonic linear cascade which matched engine Reynolds number, Mach number, and shock strength. Unsteady heat flux measurements were made with Heat Flux Microsensors on both the pressure and suction surfaces of a single blade passage. Unsteady static pressure measurements were made using Kulite pressure transducers on the blade surface and end walls of the cascade. The experiments were conducted in a stationary linear cascade of blades with heated transonic air flow using a shock tube to introduce shock waves into the cascade. A time-resolved model based on conduction in the gas was found to accurately predict heat transfer due to shock heating measured during experimental tests without flow. The model under-predicted the experimental results with flow, however, by a factor of three. The heat transfer increase resulting from shock passing in heated flow averaged over 200 its (typical blade passing period) was found to be a maximum of 60% on the pressure surface near the leading edge. Based on experimental results at different flow temperatures, it was determined that shock heating has the primary effect on heat transfer, while heat transfer increase due to boundary layer disturbance is small."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xviii, 267 leaves"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Effects of shock wave passing on turbine blade heat transfer in a transonic turbine cascade"]}]}],"canonical_facts":{"dc:contributor.department":["Mechanical Engineering"],"dc:creator":["Nix, Andrew Carl"],"dc:date.accepted":["2008-08-22"],"dc:date.accessioned":["2014-03-14T21:43:18Z"],"dc:date.available":["2014-03-14T21:43:18Z","2008-08-22"],"dc:date.issued":["1996"],"dc:date.submitted":["2008-08-22"],"dc:description.abstract":["The effects of a shock wave passing through a blade passage on surface heat transfer to turbine blades were measured experimentally. The experiments were performed in a transonic linear cascade which matched engine Reynolds number, Mach number, and shock strength. Unsteady heat flux measurements were made with Heat Flux Microsensors on both the pressure and suction surfaces of a single blade passage. Unsteady static pressure measurements were made using Kulite pressure transducers on the blade surface and end walls of the cascade. The experiments were conducted in a stationary linear cascade of blades with heated transonic air flow using a shock tube to introduce shock waves into the cascade. A time-resolved model based on conduction in the gas was found to accurately predict heat transfer due to shock heating measured during experimental tests without flow. The model under-predicted the experimental results with flow, however, by a factor of three. The heat transfer increase resulting from shock passing in heated flow averaged over 200 its (typical blade passing period) was found to be a maximum of 60% on the pressure surface near the leading edge. Based on experimental results at different flow temperatures, it was determined that shock heating has the primary effect on heat transfer, while heat transfer increase due to boundary layer disturbance is small."],"dc:description.degree":["Master of Science"],"dc:format.extent":["xviii, 267 leaves"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-08222008-063734"],"dc:identifier.sourceurl":["http://scholar.lib.vt.edu/theses/available/etd-08222008-063734/"],"dc:identifier.uri":["http://hdl.handle.net/10919/44360"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:relation.haspart":["LD5655.V855_1996.N59.pdf"],"dc:relation.isformatof":["OCLC# 36801844"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["shock wave","turbine","Heat--Transmission","transonic cascade"],"dc:subject.lcc":["LD5655.V855 1996.N59"],"dc:title":["Effects of shock wave passing on turbine blade heat transfer in a transonic turbine cascade"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:05:35Z"}