{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/45366"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/45366","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Development of tension and compression creep models for wood using the time-temperature superposition principle","abstract":"To date there are no long-term creep models or practical methods to investigate the effect of creep on the safety and serviceability of modem wood structures and structural wood composites. Long-term creep models were developed for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension and compression using small clear specimens of Douglas-fir, southern pine and yellow-poplar. The specimens were tested at moisture contents of 6 %, 9 %, and 12 %, and at temperatures between 20°C and 80°C. The strain was measured using bonded strain gages. The individual creep compliance for each temperature was shifted along the log-time axis to obtain a \"master\" curve that describes the creep response of the specimens. All compliance curves also required vertical shifting. The experimental horizontal shift factors followed the Arrhenius formulation that describes the shift factor relation for polymers in the glassy region.","abstract_html":"To date there are no long-term creep models or practical methods to investigate the effect of creep on the safety and serviceability of modem wood structures and structural wood composites. Long-term creep models were developed for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension and compression using small clear specimens of Douglas-fir, southern pine and yellow-poplar. The specimens were tested at moisture contents of 6 %, 9 %, and 12 %, and at temperatures between 20°C and 80°C. The strain was measured using bonded strain gages. The individual creep compliance for each temperature was shifted along the log-time axis to obtain a &quot;master&quot; curve that describes the creep response of the specimens. All compliance curves also required vertical shifting. The experimental horizontal shift factors followed the Arrhenius formulation that describes the shift factor relation for polymers in the glassy region.","abstract_has_math":false,"creators":["Bond, Brian H."],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Wood Science and Forest Products","degree_department":"Wood Science and Forest Products","school":null,"contributors":[],"advisors":[],"committee_chairs":["Loferski, Joseph R."],"committee_members":["Frazier, Charles E.","Holzer, Siegfried M."],"year":1993,"date_issued":"1993-06-03","date_published":"1993-06-03","updated_at":"2026-11-18T20:09:44Z","subjects":["Creep testing machines","Wood -- Creep"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-10312009-020305"],"render_values":[{"text":"etd-10312009-020305","href":null,"code":true}]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-10312009-020305/"],"render_values":[{"text":"http://scholar.lib.vt.edu/theses/available/etd-10312009-020305/","href":"http://scholar.lib.vt.edu/theses/available/etd-10312009-020305/","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/45366","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/45366","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F45366","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Loferski, Joseph R."]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Frazier, Charles E.","Holzer, Siegfried M."]},{"key":"dc:contributor.department","label":"Department","values":["Wood Science and Forest Products"]},{"key":"dc:creator","label":"Author","values":["Bond, Brian H."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accepted","label":"Dc Date Accepted","values":["2009-10-31"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:48:30Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:48:30Z","2009-10-31"]},{"key":"dc:date.issued","label":"Date","values":["1993-06-03"]},{"key":"dc:date.submitted","label":"Dc Date Submitted","values":["2009-10-31"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:relation.haspart","label":"Dc Relation Haspart","values":["LD5655.V855_1993.B662.pdf"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 29046669"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Wood Science and Forest Products"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V855 1993.B662"]},{"key":"dc:subject.lcsh","label":"Dc Subject Lcsh","values":["Creep testing machines","Wood -- Creep"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-10312009-020305"]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-10312009-020305/"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/45366"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["To date there are no long-term creep models or practical methods to investigate the effect of creep on the safety and serviceability of modem wood structures and structural wood composites. Long-term creep models were developed for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension and compression using small clear specimens of Douglas-fir, southern pine and yellow-poplar. The specimens were tested at moisture contents of 6 %, 9 %, and 12 %, and at temperatures between 20°C and 80°C. The strain was measured using bonded strain gages. The individual creep compliance for each temperature was shifted along the log-time axis to obtain a \"master\" curve that describes the creep response of the specimens. All compliance curves also required vertical shifting. The experimental horizontal shift factors followed the Arrhenius formulation that describes the shift factor relation for polymers in the glassy region."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xv, 185 leaves"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Development of tension and compression creep models for wood using the time-temperature superposition principle"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Loferski, Joseph R."],"dc:contributor.committeemember":["Frazier, Charles E.","Holzer, Siegfried M."],"dc:contributor.department":["Wood Science and Forest Products"],"dc:creator":["Bond, Brian H."],"dc:date.accepted":["2009-10-31"],"dc:date.accessioned":["2014-03-14T21:48:30Z"],"dc:date.available":["2014-03-14T21:48:30Z","2009-10-31"],"dc:date.issued":["1993-06-03"],"dc:date.submitted":["2009-10-31"],"dc:description.abstract":["To date there are no long-term creep models or practical methods to investigate the effect of creep on the safety and serviceability of modem wood structures and structural wood composites. Long-term creep models were developed for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension and compression using small clear specimens of Douglas-fir, southern pine and yellow-poplar. The specimens were tested at moisture contents of 6 %, 9 %, and 12 %, and at temperatures between 20°C and 80°C. The strain was measured using bonded strain gages. The individual creep compliance for each temperature was shifted along the log-time axis to obtain a \"master\" curve that describes the creep response of the specimens. All compliance curves also required vertical shifting. The experimental horizontal shift factors followed the Arrhenius formulation that describes the shift factor relation for polymers in the glassy region."],"dc:description.degree":["Master of Science"],"dc:format.extent":["xv, 185 leaves"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-10312009-020305"],"dc:identifier.sourceurl":["http://scholar.lib.vt.edu/theses/available/etd-10312009-020305/"],"dc:identifier.uri":["http://hdl.handle.net/10919/45366"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:relation.haspart":["LD5655.V855_1993.B662.pdf"],"dc:relation.isformatof":["OCLC# 29046669"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject.lcc":["LD5655.V855 1993.B662"],"dc:subject.lcsh":["Creep testing machines","Wood -- Creep"],"dc:title":["Development of tension and compression creep models for wood using the time-temperature superposition principle"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Wood Science and Forest Products"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:09:44Z"}