{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/45834"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/45834","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"The sintering effection of time, temperature, and ZnO additions on (Ca₀.₆,Mg₀.₄)Zr₄(PO₄)₆ [CMZP] ceramics","abstract":"The sintering of (Ca<sub>0.6</sub>,Mg<sub>0.4</sub>)Zr₄(PO₄)₆ powder (CMZP) synthesized via a new solid-state reaction method was investigated for application as a thermal barrier in next generation internal combustion engines. Specifically, CMZP is being considered as a potential material for the manufacture of exhaust port liners to increase the overall performance of diesel engines. The effects of firing time, firing temperature, and amount of ZnO sintering aid on modulus of rupture (MOR), bulk density, and coefficient of thermal expansion (CTE) were determined for both dry pressed and slip cast samples to optimize the physical properties for this application. For both processing methods, suppressing the formation of secondary interparticle phases (grain boundaries) was found to be the controlling factor for obtaining high strength and positive thermal expansion. For a given ZnO level, increases in firing time and/or temperature resulted in improved density but a degradation in microstructure (undesirable grain growth, formation of a liquid phase, and intra-/trans- granular microcracking), accompanied by a reduction in MOR and negative CTE values. Therefore, optimizing bulk density was determined to be counter-productive for improving strength when ZnO is used as a sintering aid.","abstract_html":"The sintering of (Ca&lt;sub&gt;0.6&lt;/sub&gt;,Mg&lt;sub&gt;0.4&lt;/sub&gt;)Zr₄(PO₄)₆ powder (CMZP) synthesized via a new solid-state reaction method was investigated for application as a thermal barrier in next generation internal combustion engines. Specifically, CMZP is being considered as a potential material for the manufacture of exhaust port liners to increase the overall performance of diesel engines. The effects of firing time, firing temperature, and amount of ZnO sintering aid on modulus of rupture (MOR), bulk density, and coefficient of thermal expansion (CTE) were determined for both dry pressed and slip cast samples to optimize the physical properties for this application. For both processing methods, suppressing the formation of secondary interparticle phases (grain boundaries) was found to be the controlling factor for obtaining high strength and positive thermal expansion. For a given ZnO level, increases in firing time and/or temperature resulted in improved density but a degradation in microstructure (undesirable grain growth, formation of a liquid phase, and intra-/trans- granular microcracking), accompanied by a reduction in MOR and negative CTE values. Therefore, optimizing bulk density was determined to be counter-productive for improving strength when ZnO is used as a sintering aid.","abstract_has_math":false,"creators":["Clarke, James R Jr."],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Materials Science and Engineering","degree_department":"Materials Science and Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Hirschfeld, Deidre A."],"committee_members":["Reynolds, William T. Jr.","Brown, Jesse J. Jr."],"year":1996,"date_issued":"1996-07-05","date_published":"1996-07-05","updated_at":"2026-11-18T20:18:42Z","subjects":["thermal expansion","strength","microstructure","sintering","ceramics"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-11182008-063021"],"render_values":[{"text":"etd-11182008-063021","href":null,"code":true}]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-11182008-063021/"],"render_values":[{"text":"http://scholar.lib.vt.edu/theses/available/etd-11182008-063021/","href":"http://scholar.lib.vt.edu/theses/available/etd-11182008-063021/","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/45834","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/45834","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F45834","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Hirschfeld, Deidre A."]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Reynolds, William T. Jr.","Brown, Jesse J. Jr."]},{"key":"dc:contributor.department","label":"Department","values":["Materials Science and Engineering"]},{"key":"dc:creator","label":"Author","values":["Clarke, James R Jr."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accepted","label":"Dc Date Accepted","values":["2008-11-18"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:50:04Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:50:04Z","2008-11-18"]},{"key":"dc:date.issued","label":"Date","values":["1996-07-05"]},{"key":"dc:date.submitted","label":"Dc Date Submitted","values":["2008-11-18"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:relation.haspart","label":"Dc Relation Haspart","values":["LD5655.V855_1996.C538.pdf"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 35920149"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Materials Science and Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["thermal expansion","strength","microstructure","sintering","ceramics"]},{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V855 1996.C538"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-11182008-063021"]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-11182008-063021/"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/45834"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The sintering of (Ca<sub>0.6</sub>,Mg<sub>0.4</sub>)Zr₄(PO₄)₆ powder (CMZP) synthesized via a new solid-state reaction method was investigated for application as a thermal barrier in next generation internal combustion engines. Specifically, CMZP is being considered as a potential material for the manufacture of exhaust port liners to increase the overall performance of diesel engines. The effects of firing time, firing temperature, and amount of ZnO sintering aid on modulus of rupture (MOR), bulk density, and coefficient of thermal expansion (CTE) were determined for both dry pressed and slip cast samples to optimize the physical properties for this application. For both processing methods, suppressing the formation of secondary interparticle phases (grain boundaries) was found to be the controlling factor for obtaining high strength and positive thermal expansion. For a given ZnO level, increases in firing time and/or temperature resulted in improved density but a degradation in microstructure (undesirable grain growth, formation of a liquid phase, and intra-/trans- granular microcracking), accompanied by a reduction in MOR and negative CTE values. Therefore, optimizing bulk density was determined to be counter-productive for improving strength when ZnO is used as a sintering aid."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xii, 100 leaves"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["The sintering effection of time, temperature, and ZnO additions on (Ca₀.₆,Mg₀.₄)Zr₄(PO₄)₆ [CMZP] ceramics"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Hirschfeld, Deidre A."],"dc:contributor.committeemember":["Reynolds, William T. Jr.","Brown, Jesse J. Jr."],"dc:contributor.department":["Materials Science and Engineering"],"dc:creator":["Clarke, James R Jr."],"dc:date.accepted":["2008-11-18"],"dc:date.accessioned":["2014-03-14T21:50:04Z"],"dc:date.available":["2014-03-14T21:50:04Z","2008-11-18"],"dc:date.issued":["1996-07-05"],"dc:date.submitted":["2008-11-18"],"dc:description.abstract":["The sintering of (Ca<sub>0.6</sub>,Mg<sub>0.4</sub>)Zr₄(PO₄)₆ powder (CMZP) synthesized via a new solid-state reaction method was investigated for application as a thermal barrier in next generation internal combustion engines. Specifically, CMZP is being considered as a potential material for the manufacture of exhaust port liners to increase the overall performance of diesel engines. The effects of firing time, firing temperature, and amount of ZnO sintering aid on modulus of rupture (MOR), bulk density, and coefficient of thermal expansion (CTE) were determined for both dry pressed and slip cast samples to optimize the physical properties for this application. For both processing methods, suppressing the formation of secondary interparticle phases (grain boundaries) was found to be the controlling factor for obtaining high strength and positive thermal expansion. For a given ZnO level, increases in firing time and/or temperature resulted in improved density but a degradation in microstructure (undesirable grain growth, formation of a liquid phase, and intra-/trans- granular microcracking), accompanied by a reduction in MOR and negative CTE values. Therefore, optimizing bulk density was determined to be counter-productive for improving strength when ZnO is used as a sintering aid."],"dc:description.degree":["Master of Science"],"dc:format.extent":["xii, 100 leaves"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-11182008-063021"],"dc:identifier.sourceurl":["http://scholar.lib.vt.edu/theses/available/etd-11182008-063021/"],"dc:identifier.uri":["http://hdl.handle.net/10919/45834"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:relation.haspart":["LD5655.V855_1996.C538.pdf"],"dc:relation.isformatof":["OCLC# 35920149"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject":["thermal expansion","strength","microstructure","sintering","ceramics"],"dc:subject.lcc":["LD5655.V855 1996.C538"],"dc:title":["The sintering effection of time, temperature, and ZnO additions on (Ca₀.₆,Mg₀.₄)Zr₄(PO₄)₆ [CMZP] ceramics"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Materials Science and Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:18:42Z"}