{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/46018"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/46018","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"3-D flow and performance of a rocket pump inducer at design and off-design flow rates","abstract":"The ADP rocket pump inducer was studied computationally using a 3-D Navier-Stokes solver, The Moore Elliptic Flow Program. Design and off-design flow rates were simulated to qualitatively and quantitatively study the effects of flow rate on the flow and performance. Several views of the results were created to aid flow visualization. The 3-D laser measurements made by Rocketdyne were used for comparison. The velocity magnitudes as well as the flow patterns within the inducer match well between the calculated and measured results. The axial velocity distribution and the rotary stagnation pressure, losses, are predicted very well by the calculation. The internal flow patterns developed in the simulation as expected, with radial outflow in the blade boundary layers. The tip leakage flow formed a recirculation region, a toroidal shaped vortex at the tip leading edge of the blades. The associated backflow forms a blockage that varies with flow rate. The thermodynamic performance was evaluated by calculating the contributions to pressure rise, the pump characteristic, the contributions to moment of momentum, and the efficiency. The centrifugal effect and relative velocity effect were found to vary with flow rate. The effective inlet throat radius, which governs these two effects, changes with flow rate because of the recirculation blockage. The shear on the blades was found to produce a small fraction of the work in the inducer, and most was produced by the pressure difference across the blade. The inducer efficiency was about 89%, and increased with decreasing flow rate in the range of flow rates considered, from 89% to 110% of the design flow rate.","abstract_html":"The ADP rocket pump inducer was studied computationally using a 3-D Navier-Stokes solver, The Moore Elliptic Flow Program. Design and off-design flow rates were simulated to qualitatively and quantitatively study the effects of flow rate on the flow and performance. Several views of the results were created to aid flow visualization. The 3-D laser measurements made by Rocketdyne were used for comparison. The velocity magnitudes as well as the flow patterns within the inducer match well between the calculated and measured results. The axial velocity distribution and the rotary stagnation pressure, losses, are predicted very well by the calculation. The internal flow patterns developed in the simulation as expected, with radial outflow in the blade boundary layers. The tip leakage flow formed a recirculation region, a toroidal shaped vortex at the tip leading edge of the blades. The associated backflow forms a blockage that varies with flow rate. The thermodynamic performance was evaluated by calculating the contributions to pressure rise, the pump characteristic, the contributions to moment of momentum, and the efficiency. The centrifugal effect and relative velocity effect were found to vary with flow rate. The effective inlet throat radius, which governs these two effects, changes with flow rate because of the recirculation blockage. The shear on the blades was found to produce a small fraction of the work in the inducer, and most was produced by the pressure difference across the blade. The inducer efficiency was about 89%, and increased with decreasing flow rate in the range of flow rates considered, from 89% to 110% of the design flow rate.","abstract_has_math":false,"creators":["Doan, Andrew W."],"institution":"Virginia Tech","degree_name":"Master of Science","degree_level":"masters","degree_discipline":"Mechanical Engineering","degree_department":"Mechanical Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Moore, John"],"committee_members":["Brown, Eugene F.","Dancey, Clinton L."],"year":1994,"date_issued":"1994-08-05","date_published":"1994-08-05","updated_at":"2026-11-18T20:28:15Z","subjects":["Rocket engines -- Fuel systems"],"languages":["en"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-11242009-020251"],"render_values":[{"text":"etd-11242009-020251","href":null,"code":true}]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-11242009-020251/"],"render_values":[{"text":"http://scholar.lib.vt.edu/theses/available/etd-11242009-020251/","href":"http://scholar.lib.vt.edu/theses/available/etd-11242009-020251/","code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/46018","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/46018","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F46018","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Moore, John"]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Brown, Eugene F.","Dancey, Clinton L."]},{"key":"dc:contributor.department","label":"Department","values":["Mechanical Engineering"]},{"key":"dc:creator","label":"Author","values":["Doan, Andrew W."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accepted","label":"Dc Date Accepted","values":["2009-11-24"]},{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2014-03-14T21:50:42Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2014-03-14T21:50:42Z","2009-11-24"]},{"key":"dc:date.issued","label":"Date","values":["1994-08-05"]},{"key":"dc:date.submitted","label":"Dc Date Submitted","values":["2009-11-24"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Tech"]},{"key":"dc:relation.haspart","label":"Dc Relation Haspart","values":["LD5655.V855_1994.D636.pdf"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 32104666"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["masters"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V855 1994.D636"]},{"key":"dc:subject.lcsh","label":"Dc Subject Lcsh","values":["Rocket engines -- Fuel systems"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.other","label":"Dc Identifier Other","values":["etd-11242009-020251"]},{"key":"dc:identifier.sourceurl","label":"Source URL","values":["http://scholar.lib.vt.edu/theses/available/etd-11242009-020251/"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/46018"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The ADP rocket pump inducer was studied computationally using a 3-D Navier-Stokes solver, The Moore Elliptic Flow Program. Design and off-design flow rates were simulated to qualitatively and quantitatively study the effects of flow rate on the flow and performance. Several views of the results were created to aid flow visualization. The 3-D laser measurements made by Rocketdyne were used for comparison. The velocity magnitudes as well as the flow patterns within the inducer match well between the calculated and measured results. The axial velocity distribution and the rotary stagnation pressure, losses, are predicted very well by the calculation. The internal flow patterns developed in the simulation as expected, with radial outflow in the blade boundary layers. The tip leakage flow formed a recirculation region, a toroidal shaped vortex at the tip leading edge of the blades. The associated backflow forms a blockage that varies with flow rate. The thermodynamic performance was evaluated by calculating the contributions to pressure rise, the pump characteristic, the contributions to moment of momentum, and the efficiency. The centrifugal effect and relative velocity effect were found to vary with flow rate. The effective inlet throat radius, which governs these two effects, changes with flow rate because of the recirculation blockage. The shear on the blades was found to produce a small fraction of the work in the inducer, and most was produced by the pressure difference across the blade. The inducer efficiency was about 89%, and increased with decreasing flow rate in the range of flow rates considered, from 89% to 110% of the design flow rate."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Master of Science"]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xi, 101 leaves"]},{"key":"dc:format.medium","label":"Dc Format Medium","values":["BTD"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["3-D flow and performance of a rocket pump inducer at design and off-design flow rates"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Moore, John"],"dc:contributor.committeemember":["Brown, Eugene F.","Dancey, Clinton L."],"dc:contributor.department":["Mechanical Engineering"],"dc:creator":["Doan, Andrew W."],"dc:date.accepted":["2009-11-24"],"dc:date.accessioned":["2014-03-14T21:50:42Z"],"dc:date.available":["2014-03-14T21:50:42Z","2009-11-24"],"dc:date.issued":["1994-08-05"],"dc:date.submitted":["2009-11-24"],"dc:description.abstract":["The ADP rocket pump inducer was studied computationally using a 3-D Navier-Stokes solver, The Moore Elliptic Flow Program. Design and off-design flow rates were simulated to qualitatively and quantitatively study the effects of flow rate on the flow and performance. Several views of the results were created to aid flow visualization. The 3-D laser measurements made by Rocketdyne were used for comparison. The velocity magnitudes as well as the flow patterns within the inducer match well between the calculated and measured results. The axial velocity distribution and the rotary stagnation pressure, losses, are predicted very well by the calculation. The internal flow patterns developed in the simulation as expected, with radial outflow in the blade boundary layers. The tip leakage flow formed a recirculation region, a toroidal shaped vortex at the tip leading edge of the blades. The associated backflow forms a blockage that varies with flow rate. The thermodynamic performance was evaluated by calculating the contributions to pressure rise, the pump characteristic, the contributions to moment of momentum, and the efficiency. The centrifugal effect and relative velocity effect were found to vary with flow rate. The effective inlet throat radius, which governs these two effects, changes with flow rate because of the recirculation blockage. The shear on the blades was found to produce a small fraction of the work in the inducer, and most was produced by the pressure difference across the blade. The inducer efficiency was about 89%, and increased with decreasing flow rate in the range of flow rates considered, from 89% to 110% of the design flow rate."],"dc:description.degree":["Master of Science"],"dc:format.extent":["xi, 101 leaves"],"dc:format.medium":["BTD"],"dc:format.mimetype":["application/pdf"],"dc:identifier.other":["etd-11242009-020251"],"dc:identifier.sourceurl":["http://scholar.lib.vt.edu/theses/available/etd-11242009-020251/"],"dc:identifier.uri":["http://hdl.handle.net/10919/46018"],"dc:language.iso":["en"],"dc:publisher":["Virginia Tech"],"dc:relation.haspart":["LD5655.V855_1994.D636.pdf"],"dc:relation.isformatof":["OCLC# 32104666"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject.lcc":["LD5655.V855 1994.D636"],"dc:subject.lcsh":["Rocket engines -- Fuel systems"],"dc:title":["3-D flow and performance of a rocket pump inducer at design and off-design flow rates"],"dc:type":["Thesis"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["masters"],"thesis:degree_name":["Master of Science"],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:28:15Z"}