{"id":{"repo_id":"vt","oai_identifier":"oai:vtechworks.lib.vt.edu:10919/52291"},"canonical_url":"https://search.ndltd.org/etd/vt/oai:vtechworks.lib.vt.edu:10919/52291","repository":{"repo_id":"vt","name":"Virginia Tech","base_url":"https://vtechworks.lib.vt.edu/oai/request"},"display":{"title":"Automated design of composite plates for improved damage tolerance","abstract":"An automated procedure for designing minimum-weight composite plates subject to a local damage constraint under tensile and compressive loadings has been developed. A strain based criterion was used to obtain fracture toughness of cracked plates under tension. Results of an experimental investigation of the effects of simulated through-the-thickness cracks on the buckling, postbuckling, and failure characteristics of composite flat plates are presented. A model for kinking failure of fibers at the crack tip was developed - for compression loadings. A finite element program based on linear elastic fracture mechanics for calculating stress intensity factor (SIF) was incorporated in the design cycle. A general purpose mathematical optimization algorithm was used for the weight minimization. Analytical sensitivity derivatives of the SIF, obtained by employing the adjoint variable technique, were used to enhance the computational efficiency of the procedure. Design results for both unstiffened and stiffened plates are presented.","abstract_html":"An automated procedure for designing minimum-weight composite plates subject to a local damage constraint under tensile and compressive loadings has been developed. A strain based criterion was used to obtain fracture toughness of cracked plates under tension. Results of an experimental investigation of the effects of simulated through-the-thickness cracks on the buckling, postbuckling, and failure characteristics of composite flat plates are presented. A model for kinking failure of fibers at the crack tip was developed - for compression loadings. A finite element program based on linear elastic fracture mechanics for calculating stress intensity factor (SIF) was incorporated in the design cycle. A general purpose mathematical optimization algorithm was used for the weight minimization. Analytical sensitivity derivatives of the SIF, obtained by employing the adjoint variable technique, were used to enhance the computational efficiency of the procedure. Design results for both unstiffened and stiffened plates are presented.","abstract_has_math":false,"creators":["Gürdal, Zafer"],"institution":"Virginia Polytechnic Institute and State University","degree_name":"Ph. D.","degree_level":"doctoral","degree_discipline":"Aerospace Engineering","degree_department":"Aerospace Engineering","school":null,"contributors":[],"advisors":[],"committee_chairs":["Haftka, Raphael T."],"committee_members":["Hallauer, William L.","Johnson, Eric W.","Jones, Robert M.","Kelley, Henry J."],"year":1985,"date_issued":"1985","date_published":"1985","updated_at":"2026-11-18T20:06:48Z","subjects":["Plates (Engineering) -- Design and construction"],"languages":["en_US"],"rights":["In Copyright"],"rights_urls":["http://rightsstatements.org/vocab/InC/1.0/"],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/10919/52291","outbound_label":"Handle","outbound_source":"dc:identifier.uri","record_url":"http://hdl.handle.net/10919/52291","record_label":"Repository record","record_kind":"handle","record_source":"dc:identifier.uri","download_url":null,"download_label":null,"download_source":null,"access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://vtechworks.lib.vt.edu/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Avtechworks.lib.vt.edu%3A10919%2F52291","prefix":"dim"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.committeechair","label":"Committee Chair","values":["Haftka, Raphael T."]},{"key":"dc:contributor.committeemember","label":"Committee Member","values":["Hallauer, William L.","Johnson, Eric W.","Jones, Robert M.","Kelley, Henry J."]},{"key":"dc:contributor.department","label":"Department","values":["Aerospace Engineering"]},{"key":"dc:creator","label":"Author","values":["Gürdal, Zafer"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2015-05-14T16:36:06Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2015-05-14T16:36:06Z"]},{"key":"dc:date.issued","label":"Date","values":["1985"]},{"key":"dc:publisher","label":"Institution","values":["Virginia Polytechnic Institute and State University"]},{"key":"dc:relation.isformatof","label":"Dc Relation Isformatof","values":["OCLC# 12489251"]},{"key":"dc:type","label":"Dc Type","values":["Dissertation"]},{"key":"dc:type.dcmitype","label":"Dc Type Dcmitype","values":["Text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Aerospace Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["doctoral"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Virginia Polytechnic Institute and State University"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject.lcc","label":"Dc Subject Lcc","values":["LD5655.V856 1985.G587"]},{"key":"dc:subject.lcsh","label":"Dc Subject Lcsh","values":["Plates (Engineering) -- Design and construction"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["en_US"]},{"key":"dc:rights","label":"Dc Rights","values":["In Copyright"]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://rightsstatements.org/vocab/InC/1.0/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/10919/52291"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["An automated procedure for designing minimum-weight composite plates subject to a local damage constraint under tensile and compressive loadings has been developed. A strain based criterion was used to obtain fracture toughness of cracked plates under tension. Results of an experimental investigation of the effects of simulated through-the-thickness cracks on the buckling, postbuckling, and failure characteristics of composite flat plates are presented. A model for kinking failure of fibers at the crack tip was developed - for compression loadings. A finite element program based on linear elastic fracture mechanics for calculating stress intensity factor (SIF) was incorporated in the design cycle. A general purpose mathematical optimization algorithm was used for the weight minimization. Analytical sensitivity derivatives of the SIF, obtained by employing the adjoint variable technique, were used to enhance the computational efficiency of the procedure. Design results for both unstiffened and stiffened plates are presented."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Ph. D."]},{"key":"dc:format.extent","label":"Dc Format Extent","values":["xii, 150 leaves"]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Automated design of composite plates for improved damage tolerance"]}]}],"canonical_facts":{"dc:contributor.committeechair":["Haftka, Raphael T."],"dc:contributor.committeemember":["Hallauer, William L.","Johnson, Eric W.","Jones, Robert M.","Kelley, Henry J."],"dc:contributor.department":["Aerospace Engineering"],"dc:creator":["Gürdal, Zafer"],"dc:date.accessioned":["2015-05-14T16:36:06Z"],"dc:date.available":["2015-05-14T16:36:06Z"],"dc:date.issued":["1985"],"dc:description.abstract":["An automated procedure for designing minimum-weight composite plates subject to a local damage constraint under tensile and compressive loadings has been developed. A strain based criterion was used to obtain fracture toughness of cracked plates under tension. Results of an experimental investigation of the effects of simulated through-the-thickness cracks on the buckling, postbuckling, and failure characteristics of composite flat plates are presented. A model for kinking failure of fibers at the crack tip was developed - for compression loadings. A finite element program based on linear elastic fracture mechanics for calculating stress intensity factor (SIF) was incorporated in the design cycle. A general purpose mathematical optimization algorithm was used for the weight minimization. Analytical sensitivity derivatives of the SIF, obtained by employing the adjoint variable technique, were used to enhance the computational efficiency of the procedure. Design results for both unstiffened and stiffened plates are presented."],"dc:description.degree":["Ph. D."],"dc:format.extent":["xii, 150 leaves"],"dc:format.mimetype":["application/pdf"],"dc:identifier.uri":["http://hdl.handle.net/10919/52291"],"dc:language.iso":["en_US"],"dc:publisher":["Virginia Polytechnic Institute and State University"],"dc:relation.isformatof":["OCLC# 12489251"],"dc:rights":["In Copyright"],"dc:rights.uri":["http://rightsstatements.org/vocab/InC/1.0/"],"dc:subject.lcc":["LD5655.V856 1985.G587"],"dc:subject.lcsh":["Plates (Engineering) -- Design and construction"],"dc:title":["Automated design of composite plates for improved damage tolerance"],"dc:type":["Dissertation"],"dc:type.dcmitype":["Text"],"thesis:degree_discipline":["Aerospace Engineering"],"thesis:degree_level":["doctoral"],"thesis:degree_name":["Ph. D."],"thesis:institution_name":["Virginia Polytechnic Institute and State University"]},"updated_at":"2026-11-18T20:06:48Z"}