{"id":{"repo_id":"whiterose","oai_identifier":"oai:etheses.whiterose.ac.uk:31702"},"canonical_url":"https://search.ndltd.org/etd/whiterose/oai:etheses.whiterose.ac.uk:31702","repository":{"repo_id":"whiterose","name":"White Rose University Consortium","base_url":"https://etheses.whiterose.ac.uk/cgi/oai2"},"display":{"title":"Electron Beam Induced Damage and Helium Accumulation in Lithium Metatitanate Ceramic Breeder Materials","abstract":"Polycrystalline lithium metatitanate (Li2TiO3) is an attractive material for a range of applications including battery materials and microwave dielectrics, it has also attracted a great deal of attention as proposed tritium breeder material for use in nuclear fusion reactors. During the continued development of Li2TiO3, and similar Li-containing ceramics, for these advanced applications, transmission electron microscopy (TEM) is likely to be employed to study the nano-structure of these materials and, in the case of nuclear fusion applications, their response to radiation induced damage. In this project, the effects of ceramic processing conditions on the microstructure of Li2TiO3 ceramics was first identified. The effects of ceramic microstructure on the behaviour of Li2TiO3 under electron irradiation was subsequently investigated. Results show that electron irradiation in a conventional TEM results in the formation of nanometre sized vacancy-type defects at room temperature, and that the size and number density of the vacancy-type defects are linked to ceramic microstructure and crystallographic disorder. Electron beam induced vacancy-type defect formation is discussed in terms of electron beam heating, electron beam induced radiolysis and electron beam induced displacement damage; the displacement of Li and O lattice atoms is proposed to be primarily responsible for the observed damage. Results suggest that the formation and growth of vacancy-type defects is initially driven by the supersaturation of vacancies due to the preferential loss of interstitials to the surfaces of thin film TEM specimens, followed by coalescence of larger vacancy-type defects, which leads to cavity growth. Results from X-ray diffraction suggest that growth at room temperature may be facilitated by the presence of CO2, produced by the decomposition of a Li2CO3 surface reaction layer under the electron beam. These results highlight that care must be taken when interpreting TEM data and undertaking the associated analysis, especially in Li-containing oxides. Following the discovery of electron beam induced cavity formation in Li2TiO3, the thermal evolution of these cavities at temperatures relevant to fusion breeder blanket operating conditions was investigated using in-situ thermal annealing experiments, which were carried out under electron irradiation in a TEM. The effects of temperature, electron beam exposure time, and ceramic microstructure on cavity growth dynamics are discussed. The rate and extent of cavity growth was found to be significantly enhanced at elevated temperature, this is primarily attributed to the increased mobility of defects introduced as a result of electron beam induced displacement damage. Minimising exposure of thin-film TEM specimens to the electron beam was found to significantly 14 reduce the extent of cavity growth, particularly at high temperatures, indicating that cavity growth is strongly dependent on electron fluence. The microstructural properties of low porosity and large grain size may increase the resistance of Li2TiO3 to electron beam damage. This is attributed to the longer diffusion path to defect sinks associated with large grain size and low porosity, resulting in a reduction of preferential interstitial loss and increased probability of defect recombination; thus reducing the excess vacancy concentration responsible for cavity growth in the bulk. A distinct correlation between the temperature at which significant quantities of CO2 were released from bulk Li2TiO3 samples (revealed by the results of thermal desorption spectroscopy (TDS) experiments) and accelerated cavity growth in thin film specimens was identified. Hence it is proposed that enhanced cavity growth under electron irradiation at elevated temperature in Li2TiO3 may be facilitated by CO2 gas produced as a result of the thermal decomposition of an Li2CO3 surface reaction layer. The accumulation of helium in Li2TiO3 samples with different microstructural properties was investigated using in-situ helium ion implantation. The influence of the interactions of implanted helium with electron beam induced radiation defects on cavity / gas bubble growth at elevated temperatures was investigated using complimentary in-situ thermal annealing experiments. Helium was found to accumulate to a greater extent in samples of low porosity and large grain size. The extent of cavity / bubble growth was found to be significantly exacerbated at elevated temperatures in samples which exhibited high helium retention. Such cavities have the potential to trap tritium in a working breeder blanket, thereby impeding its release and increasing tritium inventory, both of which would be detrimental to material performance. In the absence of implanted helium, the microstructural properties of large grain size and low porosity appear to increase the radiation tolerance of Li2TiO3 to displacement damage induced by electron irradiation. However, since the presence of helium has been shown to severely exacerbate cavity growth in Li2TiO3, the increased helium retention by specimens of low porosity and large grain size in fact resulted in a greater extent of cavity growth in such specimens at temperatures relevant to breeder blanket operating conditions. As such, the properties of high porosity and small grain size are likely to be beneficial for the optimisation of the performance of Li2TiO3 ceramic breeder materials from the perspective of reducing cavity formation at breeder blanket operating temperatures when the effects of helium are taken into account.","abstract_html":"Polycrystalline lithium metatitanate (Li2TiO3) is an attractive material for a range of applications including battery materials and microwave dielectrics, it has also attracted a great deal of attention as proposed tritium breeder material for use in nuclear fusion reactors. During the continued development of Li2TiO3, and similar Li-containing ceramics, for these advanced applications, transmission electron microscopy (TEM) is likely to be employed to study the nano-structure of these materials and, in the case of nuclear fusion applications, their response to radiation induced damage. In this project, the effects of ceramic processing conditions on the microstructure of Li2TiO3 ceramics was first identified. The effects of ceramic microstructure on the behaviour of Li2TiO3 under electron irradiation was subsequently investigated. Results show that electron irradiation in a conventional TEM results in the formation of nanometre sized vacancy-type defects at room temperature, and that the size and number density of the vacancy-type defects are linked to ceramic microstructure and crystallographic disorder. Electron beam induced vacancy-type defect formation is discussed in terms of electron beam heating, electron beam induced radiolysis and electron beam induced displacement damage; the displacement of Li and O lattice atoms is proposed to be primarily responsible for the observed damage. Results suggest that the formation and growth of vacancy-type defects is initially driven by the supersaturation of vacancies due to the preferential loss of interstitials to the surfaces of thin film TEM specimens, followed by coalescence of larger vacancy-type defects, which leads to cavity growth. Results from X-ray diffraction suggest that growth at room temperature may be facilitated by the presence of CO2, produced by the decomposition of a Li2CO3 surface reaction layer under the electron beam. These results highlight that care must be taken when interpreting TEM data and undertaking the associated analysis, especially in Li-containing oxides. Following the discovery of electron beam induced cavity formation in Li2TiO3, the thermal evolution of these cavities at temperatures relevant to fusion breeder blanket operating conditions was investigated using in-situ thermal annealing experiments, which were carried out under electron irradiation in a TEM. The effects of temperature, electron beam exposure time, and ceramic microstructure on cavity growth dynamics are discussed. The rate and extent of cavity growth was found to be significantly enhanced at elevated temperature, this is primarily attributed to the increased mobility of defects introduced as a result of electron beam induced displacement damage. Minimising exposure of thin-film TEM specimens to the electron beam was found to significantly 14 reduce the extent of cavity growth, particularly at high temperatures, indicating that cavity growth is strongly dependent on electron fluence. The microstructural properties of low porosity and large grain size may increase the resistance of Li2TiO3 to electron beam damage. This is attributed to the longer diffusion path to defect sinks associated with large grain size and low porosity, resulting in a reduction of preferential interstitial loss and increased probability of defect recombination; thus reducing the excess vacancy concentration responsible for cavity growth in the bulk. A distinct correlation between the temperature at which significant quantities of CO2 were released from bulk Li2TiO3 samples (revealed by the results of thermal desorption spectroscopy (TDS) experiments) and accelerated cavity growth in thin film specimens was identified. Hence it is proposed that enhanced cavity growth under electron irradiation at elevated temperature in Li2TiO3 may be facilitated by CO2 gas produced as a result of the thermal decomposition of an Li2CO3 surface reaction layer. The accumulation of helium in Li2TiO3 samples with different microstructural properties was investigated using in-situ helium ion implantation. The influence of the interactions of implanted helium with electron beam induced radiation defects on cavity / gas bubble growth at elevated temperatures was investigated using complimentary in-situ thermal annealing experiments. Helium was found to accumulate to a greater extent in samples of low porosity and large grain size. The extent of cavity / bubble growth was found to be significantly exacerbated at elevated temperatures in samples which exhibited high helium retention. Such cavities have the potential to trap tritium in a working breeder blanket, thereby impeding its release and increasing tritium inventory, both of which would be detrimental to material performance. In the absence of implanted helium, the microstructural properties of large grain size and low porosity appear to increase the radiation tolerance of Li2TiO3 to displacement damage induced by electron irradiation. However, since the presence of helium has been shown to severely exacerbate cavity growth in Li2TiO3, the increased helium retention by specimens of low porosity and large grain size in fact resulted in a greater extent of cavity growth in such specimens at temperatures relevant to breeder blanket operating conditions. As such, the properties of high porosity and small grain size are likely to be beneficial for the optimisation of the performance of Li2TiO3 ceramic breeder materials from the perspective of reducing cavity formation at breeder blanket operating temperatures when the effects of helium are taken into account.","abstract_has_math":false,"creators":["Waters, Samuel John"],"institution":"University of Sheffield","degree_name":"Ph.D","degree_level":"doctoral","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":["Gandy, Amy"],"committee_chairs":[],"committee_members":[],"year":2021,"date_issued":"2021-04","date_published":"2021-04","updated_at":"2026-11-18T23:19:45Z","subjects":[],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://etheses.whiterose.ac.uk/id/eprint/31702/3/Supplementary_File_1b_ExampleDataSet_Waters_S_160122646.csv","https://etheses.whiterose.ac.uk/id/eprint/31702/5/Supplementary_File_2_Video%28Accelerated_40x%29_Waters_S_160122646.avi"],"render_values":[{"text":"https://etheses.whiterose.ac.uk/id/eprint/31702/3/Supplementary_File_1b_ExampleDataSet_Waters_S_160122646.csv","href":"https://etheses.whiterose.ac.uk/id/eprint/31702/3/Supplementary_File_1b_ExampleDataSet_Waters_S_160122646.csv","code":true},{"text":"https://etheses.whiterose.ac.uk/id/eprint/31702/5/Supplementary_File_2_Video%28Accelerated_40x%29_Waters_S_160122646.avi","href":"https://etheses.whiterose.ac.uk/id/eprint/31702/5/Supplementary_File_2_Video%28Accelerated_40x%29_Waters_S_160122646.avi","code":true}]},{"key":"dc:identifier.grantnumber","label":"Dc Identifier Grantnumber","values":["X/13205-xx"],"render_values":[{"text":"X/13205-xx","href":null,"code":true}]}],"person_identifier_entries":[{"key":"person:identifier.orcid","label":"ORCID","values":["0000000222398625"],"render_values":[{"text":"0000-0002-2239-8625","href":"https://orcid.org/0000-0002-2239-8625","code":true}]}]},"links":{"outbound_url":"https://etheses.whiterose.ac.uk/id/eprint/31702/2/Supplementary_File_1a_Spreadsheet_DefectMeasurement_Waters_S_160122646.xlsx","outbound_label":"Repository record","outbound_source":"dc:identifier.uri","record_url":"https://etheses.whiterose.ac.uk/id/eprint/31702/2/Supplementary_File_1a_Spreadsheet_DefectMeasurement_Waters_S_160122646.xlsx","record_label":"Repository record","record_kind":"record","record_source":"dc:identifier.uri","download_url":"https://etheses.whiterose.ac.uk/id/eprint/31702/1/Thesis_Waters_S_160122646_PostCorrections.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.whiterose.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.whiterose.ac.uk%3A31702","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Gandy, Amy"]},{"key":"dc:contributor.sponsor","label":"Sponsor","values":["UKAEA","EPSRC","The University of Sheffield"]},{"key":"dc:creator","label":"Author","values":["Waters, Samuel John"]},{"key":"person:identifier.orcid","label":"ORCID","values":["0000000222398625"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2021-04"]},{"key":"dc:date.issued","label":"Date","values":["2021-04"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["Materials Science and Engineering (Sheffield)"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Sheffield"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["https://etheses.whiterose.ac.uk/id/eprint/31702/"]},{"key":"dc:relation.references","label":"Dc Relation References","values":["[1] C. L. Smith and S. Cowley, \"The path to fusion power,\" Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, vol. 368, no. 1914, pp. 1091-1108, Mar 2010, doi: 10.1098/rsta.2009.0216. [2] M. Kikuchi and K. Lackner, Fusion Physics. International Atomic Energy Agency (IAEA): IAEA, 2012. [3] L. V. Boccaccini et al., \"Objectives and status of EUROfusion DEMO blanket studies,\" Fusion Engineering and Design, vol. 109, pp. 1199-1206, Nov 2016, doi: 10.1016/j.fusengdes.2015.12.054. [4] F. A. Hern et al., \"Overview of the HCPB Research Activities in EUROfusion,\" IEEE Transactions on Plasma Science, vol. 46, no. 6, pp. 2247-2261, 2018, doi: 10.1109/TPS.2018.2830813. [5] F. A. Hernández et al., \"An enhanced, near-term HCPB design as driver blanket for the EU DEMO,\" Fusion Engineering and Design, vol. 146, pp. 1186-1191, 2019/09/01/ 2019, doi: https://doi.org/10.1016/j.fusengdes.2019.02.037. [6] G. Federici, L. Boccaccini, F. Cismondi, M. Gasparotto, Y. Poitevin, and I. Ricapito, \"An overview of the EU breeding blanket design strategy as an integral part of the DEMO design effort,\" Fusion Engineering and Design, vol. 141, pp. 30-42, Apr 2019, doi: 10.1016/j.fusengdes.2019.01.141. [7] M. Abdou et al., \"Blanket/first wall challenges and required R&D on the pathway to DEMO,\" Fusion Engineering and Design, vol. 100, pp. 2-43, Nov 2015, doi: 10.1016/j.fusengdes.2015.07.021. [8] R. Knitter, M. H. H. Kolb, U. Kaufmann, and A. A. Goraieb, \"Fabrication of modified lithium orthosilicate pebbles by addition of titania,\" Journal of Nuclear Materials, vol. 442, no. 1-3, pp. S433-S436, Nov 2013, doi: 10.1016/j.jnucmat.2012.10.034. [9] S. Liu et al., \"Conceptual design of the water cooled ceramic breeder blanket for CFETR based on pressurized water cooled reactor technology,\" Fusion Engineering and Design, vol. 124, pp. 865-870, 2017/11/01/ 2017, doi: https://doi.org/10.1016/j.fusengdes.2017.02.065. [10] E. R. Kumar, K. N. Vyas, and T. Jayakumar, \"Overview of LLCB TBM design and R&D activities in India,\" Fusion Engineering and Design, vol. 109-111, pp. 1522-1527, 2016/11/01/ 2016, doi: https://doi.org/10.1016/j.fusengdes.2015.11.038. [11] Y. Kawamura et al., \"Status of water cooled ceramic breeder blanket development,\" Fusion Engineering and Design, vol. 136, pp. 1550-1556, 2018/11/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.05.055. [12] R. Knitter, P. Chaudhuri, Y. J. Feng, T. Hoshino, and I. K. Yu, \"Recent developments of solid breeder fabrication,\" Journal of Nuclear Materials, vol. 442, no. 1-3, pp. S420-S424, Nov 2013, doi: 10.1016/j.jnucmat.2013.02.060. [13] C. E. Kessel et al., \"Overview of the fusion nuclear science facility, a credible break-in step on the path to fusion energy,\" Fusion Engineering and Design, vol. 135, Part B, pp. 236-270, Oct 2018, doi: https://doi.org/10.1016/j.fusengdes.2017.05.081. [14] M. Oyaidzu et al., \"Correlation between annihilation of radiation defects and tritium release in Li2TiO3,\" Journal of Nuclear Materials, vol. 329, pp. 1313-1317, Aug 2004, doi: 10.1016/j.jnucmat.2004.04.223. [15] M. Kobayashi, Y. Oya, K. Munakata, and K. Okuno, \"Developing a tritium release model for Li2TiO3 with irradiation-induced defects,\" Journal of Nuclear Materials, vol. 458, pp. 22-28, Mar 2015, doi: 10.1016/j.jnucmat.2014.11.047. [16] K. Toda et al., \"Correlation between release of deuterium and annihilation of irradiation defects produced by gamma-ray in Li2TiO3,\" Fusion Engineering and Design, vol. 88, no. 9-10, pp. 2369-2372, Oct 2013, doi: 10.1016/j.fusengdes.2013.05.006. 173 [17] M. Klimenkov, E. Materna-Morris, and A. Moslang, \"Characterization of radiation induced defects in EUROFER 97 after neutron irradiation,\" (in English), Journal of Nuclear Materials, Article; Proceedings Paper vol. 417, no. 1-3, pp. 124-126, Oct 2011, doi: 10.1016/j.jnucmat.2010.12.261. [18] R. M. Mayer and L. M. Brown, \"Nucleation and growth of voids by radiation: I. Formulation of the problem,\" Journal of Nuclear Materials, vol. 95, no. 1, pp. 46-57, 1980/11/01/ 1980, doi: https://doi.org/10.1016/0022-3115(80)90079-3. [19] C. A. Taylor et al., \"Investigating Helium Bubble Nucleation and Growth through Simultaneous In-Situ Cryogenic, Ion Implantation, and Environmental Transmission Electron Microscopy,\" Materials, vol. 12, no. 16, Aug 2019, Art no. 2618, doi: 10.3390/ma12162618. [20] S. J. Zinkle, \"Effect of H and He irradiation on cavity formation and blistering in ceramics,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 286, pp. 4-19, Sep 2012, doi: 10.1016/j.nimb.2012.03.030. [21] B. N. Singh and A. J. E. Foreman, \"An assessment of void nucleation by gas atoms during irradiation,\" Journal of Nuclear Materials, vol. 104, pp. 1469-1474, 1981/01/01/ 1981, doi: https://doi.org/10.1016/0022-3115(82)90807-8. [22] R. M. Mayer, W. M. Stobbs, and P. R. Ward, \"The effect of gas on the irradiation of aluminium inside a high voltage electron microscope,\" Journal of Microscopy, https://doi.org/10.1111/j.1365-2818.1975.tb04039.x vol. 105, no. 1, pp. 87-95, 1975/09/01 1975, doi: https://doi.org/10.1111/j.1365-2818.1975.tb04039.x. [23] R. E. Stoller, \"THE INFLUENCE OF HELIUM ON MICROSTRUCTURAL EVOLUTION - IMPLICATIONS FOR DT FUSION-REACTORS,\" Journal of Nuclear Materials, vol. 174, no. 2-3, pp. 289-310, Nov 1990, doi: 10.1016/0022-3115(90)90242-f. [24] M. Kobayashi, H. Uchimura, K. Toda, and Y. Oya, \"Effects of helium and ambient water vapor on tritium release from Li2TiO3,\" Journal of Nuclear Materials, vol. 455, no. 1-3, pp. 735-738, Dec 2014, doi: 10.1016/j.jnucmat.2014.08.058. [25] M. Rose, A. G. Balogh, and H. Hahn, \"Instability of irradiation induced defects in nanostructured materials,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 127-128, pp. 119-122, 1997/05/02/ 1997, doi: https://doi.org/10.1016/S0168-583X(96)00863-4. [26] B. Muntifering et al., \"Cavity Evolution at Grain Boundaries as a Function of Radiation Damage and Thermal Conditions in Nanocrystalline Nickel,\" Materials Research Letters, vol. 4, no. 2, pp. 96-103, 2016, doi: 10.1080/21663831.2015.1121165. [27] X. M. Bai, A. F. Voter, R. G. Hoagland, M. Nastasi, and B. P. Uberuaga, \"Efficient Annealing of Radiation Damage Near Grain Boundaries via Interstitial Emission,\" Science, vol. 327, no. 5973, pp. 1631-1634, Mar 2010, doi: 10.1126/science.1183723. [28] T. D. Shen, S. Feng, M. Tang, J. A. Valdez, Y. Wang, and K. E. Sickafus, \"Enhanced radiation tolerance in nanocrystalline MgGa2O4,\" Applied Physics Letters, vol. 90, no. 26, Jun 2007, Art no. 263115, doi: 10.1063/1.2753098. [29] Z. Y. Huang et al., \"Defect-fluorite Gd2Zr2O7 ceramics under helium irradiation: Amorphization, cell volume expansion, and multi-stage bubble formation,\" Journal of the American Ceramic Society, vol. 102, no. 8, pp. 4911-4918, Aug 2019, doi: 10.1111/jace.16364. [30] S. Dey et al., \"Radiation Tolerance of Nanocrystalline Ceramics: Insights from Yttria Stabilized Zirconia,\" Scientific Reports, vol. 5, Jan 2015, Art no. 7746, doi: 10.1038/srep07746. [31] W. F. Cureton et al., \"Grain size effects on irradiated CeO2, ThO2, and UO2,\" Acta Materialia, vol. 160, pp. 47-56, Nov 2018, doi: 10.1016/j.actamat.2018.08.040. [32] O. El-Atwani et al., \"The role of grain size in He bubble formation: Implications for swelling resistance,\" Journal of Nuclear Materials, vol. 484, pp. 236-244, Feb 2017, doi: 10.1016/j.jnucmat.2016.12.003. [33] M. Zmitko et al., \"Development and qualification of functional materials for the EU Test Blanket Modules: Strategy and R&D activities,\" Journal of Nuclear Materials, vol. 417, no. 1-3, pp. 678-683, Oct 2011, doi: 10.1016/j.jnucmat.2011.02.009. 174 [34] A. Zarins et al., \"Behaviour of advanced tritium breeder pebbles under simultaneous action of accelerated electrons and high temperature,\" Fusion Engineering and Design, vol. 121, pp. 167-173, 2017/10/01/ 2017, doi: https://doi.org/10.1016/j.fusengdes.2017.06.033. [35] M. Lang et al., \"Swift heavy ion-induced amorphization of CaZrO3 perovskite,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 286, pp. 271-276, 2012/09/01/ 2012, doi: https://doi.org/10.1016/j.nimb.2011.12.028. [36] M. Klimenkov, P. Vladimirov, J. Hoffmann, N. Zimber, A. Moslang, and V. Kuksenko, \"First simultaneous detection of helium and tritium inside bubbles in beryllium,\" Micron, vol. 127, Dec 2019, Art no. 102754, doi: 10.1016/j.micron.2019.102754. [37] N. Sasajima, T. Matsui, S. Furuno, K. Hojou, and H. Otsu, \"Damage accumulation in Al2O3 during H2+ or He+ ion irradiation,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 148, no. 1, pp. 745-751, 1999/01/02/ 1999, doi: https://doi.org/10.1016/S0168-583X(98)00810-6. [38] N. T. Wu, H. Wu, H. Liu, and Y. Zhang, \"Solvothermal coating LiNi0.8Co0.15Al0.05O2 microspheres with nanoscale Li2TiO3 shell for long lifespan Li-ion battery cathode materials,\" Journal of Alloys and Compounds, vol. 665, pp. 48-56, Apr 2016, doi: 10.1016/j.jallcom.2016.01.044. [39] L. Q. Zhang and H. Noguchi, \"Novel layered Li-Cr-Ti-O cathode materials related to the LiCrO2-Li2TiO3 solid solution,\" Journal of the Electrochemical Society, vol. 150, no. 5, pp. A601-A607, May 2003, doi: 10.1149/1.1566016. [40] K. Meng, Z. X. Wang, H. J. Guo, X. H. Li, and D. Wang, \"Improving the cycling performance of LiNi0.8Co0.1Mn0.1O2 by surface coating with Li2TiO3,\" Electrochimica Acta, vol. 211, pp. 822-831, Sep 2016, doi: 10.1016/j.electacta.2016.06.110. [41] Y. W. Li et al., \"High performance Co3O4/Li2TiO3 composite hollow nanofibers as anode material for Li-ion batteries,\" Journal of Materials Science-Materials in Electronics, vol. 29, no. 16, pp. 14222-14231, Aug 2018, doi: 10.1007/s10854-018-9555-5. [42] Y. Wang, A. Zhou, X. Dai, L. Feng, J. Li, and J. Li, \"Solid-state synthesis of submicron-sized Li4Ti5O12/Li2TiO3 composites with rich grain boundaries for lithium ion batteries,\" Journal of Power Sources, vol. 266, pp. 114-120, 2014/11/15/ 2014, doi: https://doi.org/10.1016/j.jpowsour.2014.05.002. [43] H. S. Bhatti et al., \"Electrochemical Characteristics and Li+ Ion Intercalation Kinetics of Dual-Phase Li4Ti5O12/Li2TiO3 Composite in the Voltage Range 0-3 V,\" Journal of Physical Chemistry C, vol. 120, no. 18, pp. 9553-9561, May 2016, doi: 10.1021/acs.jpcc.5b12114. [44] A. Lakshmi-Narayana, M. Dhananjaya, N. Guru-Prakash, O. Hussain, A. Mauger, and C. Julien, \"Li2TiO3/Graphene and Li2TiO3/CNT Composites as Anodes for High Power Li-Ion Batteries,\" ChemistrySelect, vol. 3, no. 31, pp. 9150-9158, 2018. [45] Y.-z. Hao, Q.-l. Zhang, J. Zhang, C.-r. Xin, and H. Yang, \"Enhanced sintering characteristics and microwave dielectric properties of Li2TiO3 due to nano-size and nonstoichiometry effect,\" Journal of Materials Chemistry, 10.1039/C2JM33788F vol. 22, no. 45, pp. 23885-23892, 2012, doi: 10.1039/C2JM33788F. [46] Y.-Z. Hao, H. Yang, G.-H. Chen, and Q.-L. Zhang, \"Microwave dielectric properties of Li2TiO3 ceramics doped with LiF for LTCC applications,\" Journal of Alloys and Compounds, vol. 552, pp. 173-179, 2013/03/05/ 2013, doi: https://doi.org/10.1016/j.jallcom.2012.10.110. [47] V. C. Martins et al., \"High thermal stability of Li2TiO3-Al2O3 composite in the microwave C-Band,\" Journal of Physics and Chemistry of Solids, vol. 125, pp. 51-56, 2019/02/01/ 2019, doi: https://doi.org/10.1016/j.jpcs.2018.10.011. [48] A. Lakshmi Narayana, M. Dhananjaya, N. Guru Prakash, O. M. Hussain, and C. M. Julien, \"Nanocrystalline Li2TiO3 electrodes for supercapattery application,\" Ionics, vol. 23, no. 12, pp. 3419-3428, 2017/12/01 2017, doi: 10.1007/s11581-017-2147-1. [49] C. E. Johnson, K. R. Kummerer, and E. Roth, \"CERAMIC BREEDER MATERIALS,\" Journal of Nuclear Materials, vol. 155, pp. 188-201, Jul 1988, doi: 10.1016/0022-3115(88)90240-1. [50] https://www.iter.org/sci/Fusion 175 [51] A. Donato, \"A critical review of Li2O ceramic breeder material properties correlations and data,\" Fusion Engineering and Design, vol. 38, no. 4, pp. 369-392, Feb 1998, doi: 10.1016/s0920-3796(97)00123-3. [52] F. A. Hernández and P. Pereslavtsev, \"First principles review of options for tritium breeder and neutron multiplier materials for breeding blankets in fusion reactors,\" Fusion Engineering and Design, vol. 137, pp. 243-256, 2018/12/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.09.014. [53] S. Cho et al., \"Investigation of technical gaps between DEMO blanket and HCCR TBM,\" Fusion Engineering and Design, vol. 136, pp. 190-198, 2018/11/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.01.050. [54] Y. Kawamura et al., \"Progress of R&D on water cooled ceramic breeder for ITER test blanket system and DEMO,\" Fusion Engineering and Design, vol. 109-111, pp. 1637-1643, 2016/11/01/ 2016, doi: https://doi.org/10.1016/j.fusengdes.2015.11.002. [55] T. Hoshino, \"Pebble fabrication of super advanced tritium breeders using a solid solution of Li2+xTiO3+y with Li2ZrO3,\" Nuclear Materials and Energy, vol. 9, pp. 221-226, 2016/12/01/ 2016, doi: https://doi.org/10.1016/j.nme.2016.05.004. [56] R. Knitter and B. Löbbecke, \"Reprocessing of lithium orthosilicate breeder material by remelting,\" Journal of Nuclear Materials, vol. 361, no. 1, pp. 104-111, 2007/03/31/ 2007, doi: https://doi.org/10.1016/j.jnucmat.2006.11.005. [57] H. Kleykamp, \"Phase equilibria in the Li-Ti-O system and physical properties of Li2TiO3,\" Fusion Engineering and Design, vol. 61-62, pp. 361-366, Nov 2002, Art no. Pii s0920-3796(02)00120-5, doi: 10.1016/s0920-3796(02)00120-5. [58] A. Laumann et al., \"In-situ Synchrotron X-ray Diffraction Study of the Formation of Cubic Li2TiO3 Under Hydrothermal Conditions,\" European Journal of Inorganic Chemistry, no. 14, pp. 2221-2226, May 2011, doi: 10.1002/ejic.201001133. [59] G. Izquierdo and A. R. West, \"PHASE-EQUILIBRIA IN THE SYSTEM Li2O-TiO2,\" Materials Research Bulletin, vol. 15, no. 11, pp. 1655-1660, 1980, doi: 10.1016/0025-5408(80)90248-2. [60] M. Zmitko et al., \"Development and qualification of functional materials for the European HCPB TBM,\" Fusion Engineering and Design, vol. 136, pp. 1376-1385, Nov 2018, doi: 10.1016/j.fusengdes.2018.05.014. [61] K. Kataoka et al., \"Crystal growth and structure refinement of monoclinic Li2TiO3,\" Materials Research Bulletin, vol. 44, no. 1, pp. 168-172, 1/8/ 2009, doi: http://doi.org/10.1016/j.materresbull.2008.03.015. [62] J. F. Dorrian and R. E. Newnham, \"Refinement of the structure of Li2TiO3,\" Materials Research Bulletin, vol. 4, no. 3, pp. 179-183, 3// 1969, doi: http://doi.org/10.1016/0025-5408(69)90054-3. [63] Images generated using CrystalMaker®: a crystal and molecular structures program for Mac and Windows. CrystalMaker Software Ltd, Oxford, England (www.crystalmaker.com) [64] D. Tranqui, R. D. Shannon, H. Y. Chen, S. Iijima, and W. H. Baur, \"CRYSTAL-STRUCTURE OF ORDERED Li4SiO4,\" (in English), Acta Crystallographica Section B-Structural Science, Article vol. 35, no. NOV, pp. 2479-2487, 1979, doi: 10.1107/s0567740879009730. [65] B. Dejong, D. Ellerbroek, and A. L. Spek, \"LOW-TEMPERATURE STRUCTURE OF LITHIUM NESOSILICATE, Li4SiO4, AND ITS Li1S AND O1S X-RAY PHOTOELECTRON-SPECTRUM,\" Acta Crystallographica Section B-Structural Science, vol. 50, pp. 511-518, Oct 1994, doi: 10.1107/s0108768194002375. [66] H. Migge, \"ESTIMATION OF FREE-ENERGIES FOR Li8SiO6 AND Li4SiO4 AND CALCULATION OF THE PHASE-DIAGRAM OF THE Li-Si-O SYSTEM,\" Journal of Nuclear Materials, vol. 151, no. 2, pp. 101-107, Jan 1988, doi: 10.1016/0022-3115(88)90061-x. [67] G. W. Hollenberg, \"A TRANSFORMATION IN LITHIUM ORTHOSILICATE,\" Journal of Nuclear Materials, vol. 103, no. 1-3, pp. 591-595, 1982. [68] P. C. Soares, E. D. Zanotto, V. M. Fokin, and H. Jain, \"TEM and XRD study of early crystallization of lithium disilicate glasses,\" Journal of Non-Crystalline Solids, vol. 331, no. 1-3, pp. 217-227, Dec 2003, doi: 10.1016/j.jnoncrysol.2003.08.075. 176 [69] D. Vollath and H. Wedemeyer, \"ON THE PREPARATION OF THE LITHIUM SILICATES SERIES FROM Li2SiO3 TO Li8SiO6 IN ALCOHOLIC MEDIA,\" Journal of Nuclear Materials, vol. 141, pp. 334-338, Nov-Dec 1986, doi: 10.1016/s0022-3115(86)80060-5. [70] S. Claus, H. Kleykamp, and W. SmykatzKloss, \"Phase equilibria in the Li4SiO4-Li2SiO3 region of the pseudobinary Li2O-SiO2 system,\" Journal of Nuclear Materials, vol. 230, no. 1, pp. 8-11, May 1996, doi: 10.1016/0022-3115(96)00022-0. [71] S. Pupeschi, R. Knitter, and M. Kamlah, \"Effective thermal conductivity of advanced ceramic breeder pebble beds,\" Fusion Engineering and Design, vol. 116, pp. 73-80, Mar 2017, doi: 10.1016/j.fusengdes.2017.01.026. [72] A. Ying et al., \"Status and perspective of the R&D on ceramic breeder materials for testing in ITER,\" Journal of Nuclear Materials, vol. 367–370, Part B, pp. 1281-1286, 8/1/ 2007, doi: http://doi.org/10.1016/j.jnucmat.2007.03.240. [73] K. F. Hesse, \"REFINEMENT OF CRYSTAL-STRUCTURE OF LITHIUM POLYSILICATE,\" Acta Crystallographica Section B-Structural Science, vol. 33, no. MAR15, pp. 901-902, 1977, doi: 10.1107/s0567740877004932. [74] S. Kutolin and N. Druz, \"Effect of synthesis conditions on the structure and properties of lithium metazirconate,\" Inorg. Mater, vol. 1, pp. 1590-1592, 1965. [75] G. P. Wyers and E. H. P. Cordfunke, \"PHASE-RELATIONS IN THE SYSTEM Li2O ZrO2,\" Journal of Nuclear Materials, vol. 168, no. 1-2, pp. 24-30, Oct-Nov 1989, doi: 10.1016/0022-3115(89)90560-6. [76] H. Pfeiffer and K. M. Knowles, \"Reaction mechanisms and kinetics of the synthesis and decomposition of lithium metazirconate through solid-state reaction,\" Journal of the European Ceramic Society, vol. 24, no. 8, pp. 2433-2443, Jul 2004, doi: 10.1016/s0955-2219(03)00630-7. [77] J. L. Hodeau, M. Marezio, A. Santoro, and R. S. Roth, \"NEUTRON PROFILE REFINEMENT OF THE STRUCTURES OF Li2SnO3 AND Li2ZrO3,\" Journal of Solid State Chemistry, vol. 45, no. 2, pp. 170-179, 1982, doi: 10.1016/0022-4596(82)90273-0. [78] N. Roux, J. Avon, A. Floreancig, J. Mougin, B. Rasneur, and S. Ravel, \"Low-temperature tritium releasing ceramics as potential materials for the ITER breeding blanket,\" Journal of Nuclear Materials, vol. 233, pp. 1431-1435, Oct 1996, doi: 10.1016/s0022-3115(96)00136-5. [79] A. R. West, \"Solid state chemistry and its applications 2014,\" John Wiley & Sons pp. 187-197. [80] H. L. Xu et al., \"Effect of the Particle Size of Quartz Powder on the Synthesis and CO2 Absorption Properties of Li4SiO4 at High Temperature,\" Industrial & Engineering Chemistry Research, vol. 52, no. 5, pp. 1886-1891, Feb 2013, doi: 10.1021/ie301178p. [81] M. Q. Xiang, Y. C. Zhang, Y. Zhang, S. Y. Liu, H. Liu, and C. F. Wang, \"Fabrication and Characterization of Li2TiO3-Li4SiO4 Pebbles for Tritium Breeder,\" Journal of Fusion Energy, vol. 34, no. 6, pp. 1341-1347, Dec 2015, doi: 10.1007/s10894-015-9967-7. [82] D. Mandal, D. Sathiyamoorthy, and V. G. Rao, \"Preparation and characterization of lithium-titanate pebbles by solid-state reaction extrusion and spherodization techniques for fusion reactor,\" Fusion Engineering and Design, vol. 87, no. 1, pp. 7-12, Jan 2012, doi: 10.1016/j.fusengdes.2011.08.006. [83] R. Padhy, A. N. Rao, S. K. S. Parashar, K. Parashar, and P. Chaudhuri, \"Sintering effect on electrical properties of Li2TiO3,\" Solid State Ionics, vol. 256, pp. 29-37, Mar 2014, doi: 10.1016/j.ssi.2013.12.031. [84] S. Sonak, U. Jain, A. K. Sahu, S. Kumar, and N. Krishnamurthy, \"Thermogravimetric analysis and kinetic study of formation of lithium titanate by solid state route,\" Journal of Nuclear Materials, vol. 457, pp. 88-93, Feb 2015, doi: 10.1016/j.jnucmat.2014.11.016. [85] A. V. Zhukov, S. V. Chizhevskaya, and A. O. Merkushkin, \"Solid-Phase Synthesis of Li2TiO3,\" Glass and Ceramics, vol. 72, no. 9-10, pp. 327-330, Jan 2016, doi: 10.1007/s10717-016-9784-0. [86] T. Tang, Z. Zhang, J. B. Meng, and D. L. Luo, \"Synthesis and characterization of lithium silicate powders,\" Fusion Engineering and Design, vol. 84, no. 12, pp. 2124-2130, Dec 2009, doi: 10.1016/j.fusengdes.2009.02.017. [87] J. M. Miller, H. B. Hamilton, and J. D. Sullivan, \"TESTING OF LITHIUM TITANATE AS AN ALTERNATE BLANKET MATERIAL,\" Journal of Nuclear Materials, vol. 212, pp. 877-880, Sep 1994, doi: 10.1016/0022-3115(94)90961-x. 177 [88] L. DeJonghe and M. Rahaman, \"Handbook of Advanced Ceramics,\" Elsevier Inc., Marquis one, Atlanta. pp. 187-188., 2003. [89] H. Kimura, M. Asano, and K. Kubo, \"THERMOCHEMICAL STUDY OF THE VAPORIZATION OF LI2O(c) BY MASS-SPECTROMETRIC KNUDSEN EFFUSION METHOD,\" Journal of Nuclear Materials, vol. 92, no. 2-3, pp. 221-228, 1980, doi: 10.1016/0022-3115(80)90106-3. [90] Y. Ikeda, H. Ito, G. Matsumoto, and H. Hayashi, \"THE VAPORIZATION AND THERMOCHEMICAL STABILITY OF LITHIUM ALUMINATES,\" Journal of Nuclear Materials, vol. 97, no. 1-2, pp. 47-58, 1981, doi: 10.1016/0022-3115(81)90417-7. [91] H. Pfeiffer and P. Bosch, \"Thermal stability and high-temperature carbon dioxide sorption on hexa-lithium zirconate (Li6Zr2O7),\" Chemistry of Materials, vol. 17, no. 7, pp. 1704-1710, Apr 2005, doi: 10.1021/cm047897+. [92] H. Nakagawa, M. Asano, and K. Kubo, \"MASS-SPECTROMETRIC INVESTIGATION OF THE VAPORIZATION OF Li2TiO3(s),\" Journal of Nuclear Materials, vol. 110, no. 2-3, pp. 158-163, 1982, doi: 10.1016/0022-3115(82)90141-6. [93] D. Cruz, S. Bulbulian, E. Lima, and H. Pfeiffer, \"Kinetic analysis of the thermal stability of lithium silicates (Li4SiO4 and Li2SiO3),\" Journal of Solid State Chemistry, vol. 179, no. 3, pp. 909-916, Mar 2006, doi: 10.1016/j.jssc.2005.12.020. [94] S. Saito, K. Tsuchiya, H. Kawamura, T. Terai, and S. Tanaka, \"Density dependence on thermal properties of Li2TiO3 pellets,\" Journal of Nuclear Materials, vol. 253, pp. 213-218, Mar 1998, doi: 10.1016/s0022-3115(97)00314-0. [95] M. Xiang, Y. Zhang, Y. Zhang, C. Wang, W. Liu, and Y. Yu, \"Effects of grain size and porosity on strength of Li2TiO3 tritium breeding pebbles and its grain growth behavior,\" Journal of Nuclear Materials, vol. 482, pp. 163-169, 2016/12/15/ 2016, doi: https://doi.org/10.1016/j.jnucmat.2016.10.027. [96] A. E. Danks, S. R. Hall, and Z. Schnepp, \"The evolution of 'sol-gel' chemistry as a technique for materials synthesis,\" Materials Horizons, vol. 3, no. 2, pp. 91-112, Mar 2016, doi: 10.1039/c5mh00260e. [97] L. C. Klein, \"SOL-GEL PROCESSING OF IONIC CONDUCTORS,\" Solid State Ionics, vol. 32-3, pp. 639-645, Feb-Mar 1989, doi: 10.1016/0167-2738(89)90339-1. [98] O. Renoult, J. P. Boilot, J. P. Korb, and M. Boncoeur, \"LITHIUM SOL-GEL CERAMICS FOR TRITIUM BREEDING APPLICATION,\" Journal of Nuclear Materials, vol. 223, no. 2, pp. 126-134, May 1995, doi: 10.1016/0022-3115(95)00018-6. [99] X. H. Yu et al., \"Fabrication of Li4SiO4 pebbles by wet method with modified powders synthesized via sol-gel process,\" Journal of Nuclear Materials, vol. 456, pp. 455-460, Jan 2015, doi: 10.1016/j.jnucmat.2014.10.030. [100] X. W. Wu, Z. Y. Wen, X. G. Xu, J. D. Han, and B. Lin, \"Fabrication and improvement of the density of Li2TiO3 pebbles by the optimization of a sol-gel method,\" Journal of Nuclear Materials, vol. 393, no. 1, pp. 186-191, Aug 2009, doi: 10.1016/j.jnucmat.2009.06.002. [101] M. H. H. Kolb, R. Knitter, U. Kaufmann, and D. Mundt, \"Enhanced fabrication process for lithium orthosilicate pebbles as breeding material,\" Fusion Engineering and Design, vol. 86, no. 9-11, pp. 2148-2151, Oct 2011, doi: 10.1016/j.fusengdes.2011.01.104. [102] J. F. Ziegler, \"The electronic and nuclear stopping of energetic ions,\" Applied Physics Letters, vol. 31, no. 8, pp. 544-546, 1977/10/15 1977, doi: 10.1063/1.89771. [103] G. H. Kinchin and R. S. Pease, \"The Displacement of Atoms in Solids by Radiation,\" Reports on Progress in Physics, vol. 18, no. 1, pp. 1-51, 1955/01/01 1955, doi: 10.1088/0034-4885/18/1/301. [104] L. W. Hobbs, \"Radiation Effects in Analysis of Inorganic Specimens by TEM,\" in Introduction to Analytical Electron Microscopy, J. J. Hren Ed. New York: Springer Science+Business Media, 1979, p. 437. [105] C. E. Johnson, \"CERAMIC BREEDER MATERIALS,\" Ceramics International, vol. 17, no. 4, pp. 253-258, 1991, doi: 10.1016/0272-8842(91)90019-v. [106] U. Jain and A. B. Lidiard, \"GROWTH OF COLLOIDAL CENTERS IN IRRADIATED ALKALI-HALIDES,\" Philosophical Magazine, vol. 35, no. 1, pp. 245-259, 1977, doi: 10.1080/14786437708235986. 178 [107] Y. Ekmanis, \"RADIOLYSIS BEHAVIOR IN ALKALI-HALIDE CRYSTALS,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 1, no. 2-3, pp. 473-474, 1984, doi: 10.1016/0168-583x(84)90111-3. [108] V. I. Dubinko, A. A. Turkin, D. I. Vainshtein, and H. W. den Hartog, \"A new mechanism for radiation damage processes in alkali halides,\" Journal of Applied Physics, vol. 86, no. 11, pp. 5957-5960, Dec 1999, doi: 10.1063/1.371639. [109] E. Johnson and L. T. Chadderton, \"The void superlattice in fluorite,\" Micron, vol. 11, no. 3-4, pp. 247-250, 1980. [110] P. J. Call, W. Hayes, J. P. Stott, and A. E. Hughes, \"Radiolysis of alkaline-earth fluorides,\" Journal of Physics C: Solid State Physics, vol. 7, no. 14, pp. 2417-2428, 1974/07/21 1974, doi: 10.1088/0022-3719/7/14/006. [111] L. W. Hobbs and M. R. Pascucci, \"Radiolysis and defect structure in electron-irradiated α-quartz,\" Le Journal de Physique Colloques, vol. 41, no. C6, pp. C6-237, 1980. [112] J. F. Denatale and D. G. Howitt, \"A mechanism for radiation damage in silicate glasses,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 1, no. 2, pp. 489-497, 1984/02/01/ 1984, doi: https://doi.org/10.1016/0168-583X(84)90114-9. [113] L. W. Hobbs, \"ELECTRON-BEAM SENSITIVITY IN INORGANIC SPECIMENS,\" Ultramicroscopy, vol. 23, no. 3-4, pp. 339-344, 1987, doi: 10.1016/0304-3991(87)90244-0. [114] M. L. Knotek and P. J. Feibelman, \"STABILITY OF IONICALLY BONDED SURFACES IN IONIZING ENVIRONMENTS,\" Surface Science, vol. 90, no. 1, pp. 78-90, 1979, doi: 10.1016/0039-6028(79)90011-6. [115] R. A. Verrall, J. M. Miller, and P. Gierszewski, \"Performance of a Li2TiO3 pebble-bed in the CRITIC-III irradiation,\" Journal of Nuclear Materials, vol. 281, no. 1, pp. 71-79, Sep 2000, doi: 10.1016/s0022-3115(00)00057-x. [116] G. Piazza, F. Scaffidi-Argentina, and H. Werle, \"Post-irradiation examinations of Li4SiO4 pebbles irradiated in the EXOTIC-7 experiment,\" Journal of Nuclear Materials, vol. 283, pp. 1396-1400, Dec 2000, doi: 10.1016/s0022-3115(00)00300-7. [117] G. Piazza, A. Erbe, R. Rolli, and O. Romer, \"Post-irradiation examinations of Li4SiO4 pebbles irradiated in the EXOTIC-8 experiment,\" Journal of Nuclear Materials, vol. 329, pp. 1260-1265, Aug 2004, doi: 10.1016/j.jnucmat.2004.04.235. [118] M. Oyaidzu et al., \"ESR study on annihilation process of radiation defects induced in solid tritium breeding materials by neutron irradiation,\" Physica Scripta, vol. T108, pp. 42-45, 2004. [119] G. M. Ran et al., \"Annihilation behavior of irradiation defects in Li4SiO4 irradiated with high thermal neutron fluence,\" Journal of Nuclear Materials, vol. 491, pp. 43-47, Aug 2017, doi: 10.1016/j.jnucmat.2017.04.055. [120] Q. L. Zhou et al., \"Release kinetics of tritium generation in neutron irradiated biphasic Li2TiO3-Li4SiO4 ceramic breeder,\" Journal of Nuclear Materials, vol. 522, pp. 286-293, Aug 2019, doi: 10.1016/j.jnucmat.2019.05.033. [121] M. H. H. Kolb, J. M. Heuser, R. Rolli, H. C. Schneider, R. Knitter, and M. Zmitko, \"The HICU PIE results of EU ceramic breeder pebbles: General characterization,\" Journal of Nuclear Materials, vol. 531, Apr 2020, Art no. 152023, doi: 10.1016/j.jnucmat.2020.152023. [122] T. Nakazawa et al., \"High energy heavy ion induced structural disorder in Li2TiO3,\" Journal of Nuclear Materials, vol. 367-370, pp. 1398-1403, 2007/08/01/ 2007, doi: https://doi.org/10.1016/j.jnucmat.2007.04.003. [123] M. A. van Huis et al., \"Formation, growth and dissociation of He bubbles in Al2O3,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 216, pp. 149-155, Feb 2004, doi: 10.1016/j.nimb.2003.11.071. [124] J. Wang et al., \"Release behavior of hydrogen isotopes in deuterium-irradiated Li2TiO3,\" Fusion Engineering and Design, vol. 113, pp. 318-323, Dec 2016, doi: 10.1016/j.fusengdes.2016.05.022. 179 [125] E. Carella, M. Gonzalez, and R. Gonzalez-Arrabal, \"D-depth profiling in as-implanted and annealed Li-based breeder blanket ceramics,\" Journal of Nuclear Materials, vol. 438, no. 1-3, pp. 193-198, Jul 2013, doi: 10.1016/j.jnucmat.2013.02.073. [126] M. Kobayashi, Y. Oya, and K. Okuno, \"Migration of hydrogen isotopes in lithium metatitanate,\" Journal of Nuclear Materials, vol. 439, no. 1-3, pp. 159-167, Aug 2013, doi: 10.1016/j.jnucmat.2013.04.020. [127] C. A. Taylor et al., \"Combined effects of radiation damage and He accumulation on bubble nucleation in Gd2Ti2O7,\" Journal of Nuclear Materials, vol. 479, pp. 542-547, Oct 2016, doi: 10.1016/j.jnucmat.2016.07.043. [128] G. Greaves, A. H. Mir, R. W. Harrison, M. A. Tunes, S. E. Donnelly, and J. A. Hinks, \"New Microscope and Ion Accelerators for Materials Investigations (MIAMI-2) system at the University of Huddersfield,\" Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 931, pp. 37-43, 2019/07/01/ 2019, doi: https://doi.org/10.1016/j.nima.2019.03.074. [129] K. Ono, M. Miyamoto, H. Kurata, M. Haruta, and A. Yatomi, \"Dynamic behavior of helium bubbles at high temperature in Si studied by in situ TEM, STEM-EELS, and TDS,\" Journal of Applied Physics, vol. 126, no. 13, Oct 2019, Art no. 135104, doi: 10.1063/1.5118684. [130] S. M. González de Vicente, J.-L. Boutard, S.J. Zinkle and H. Tanigawa, \"Materials testing facilities and programmes for fission and ion implantation damage,\" Nuclear Fusion, vol. 57, no. 9, p. 092011, 2017. [131] S. J. Zinkle and L. L. Snead, \"Opportunities and limitations for ion beams in radiation effects studies: Bridging critical gaps between charged particle and neutron irradiations,\" Scripta Materialia, vol. 143, pp. 154-160, Jan 2018, doi: 10.1016/j.scriptamat.2017.06.041. [132] J. F. Ziegler, M. D. Ziegler, and J. P. Biersack, \"SRIM – The stopping and range of ions in matter (2010),\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 268, no. 11, pp. 1818-1823, 2010/06/01/ 2010, doi: https://doi.org/10.1016/j.nimb.2010.02.091. [133] Y. Li et al., \"In-situ TEM investigation of 30 keV He+ irradiated tungsten: Effects of temperature, fluence, and sample thickness on dislocation loop evolution,\" Acta Materialia, vol. 206, p. 116618, 2021/03/01/ 2021, doi: https://doi.org/10.1016/j.actamat.2020.116618. [134] L. F. He et al., \"In situ TEM observation of dislocation evolution in Kr-irradiated UO2 single crystal,\" Journal of Nuclear Materials, vol. 443, no. 1, pp. 71-77, 2013/11/01/ 2013, doi: https://doi.org/10.1016/j.jnucmat.2013.06.050. [135] M. P. Short, D. R. Gaston, M. Jin, L. Shao, and F. A. Garner, \"Modeling injected interstitial effects on void swelling in self-ion irradiation experiments,\" Journal of Nuclear Materials, vol. 471, pp. 200-207, 2016/04/01/ 2016, doi: https://doi.org/10.1016/j.jnucmat.2015.10.002. [136] W. Xu et al., \"In-situ atomic-scale observation of irradiation-induced void formation,\" Nature Communications, vol. 4, no. 1, p. 2288, 2013/08/05 2013, doi: 10.1038/ncomms3288. [137] L. W. Hobbs, \"Transmission electron microscopy of defects in alkali halides,\" Le Journal de Physique Colloques, vol. 34, no. C9, pp. C9-227, 1973. [138] T. Koyanagi et al., \"Microstructural evolution of pure tungsten neutron irradiated with a mixed energy spectrum,\" Journal of Nuclear Materials, vol. 490, pp. 66-74, Jul 2017, doi: 10.1016/j.jnucmat.2017.04.010. [139] H. Trinkaus and B. N. Singh, \"Modeling of void nucleation under cascade damage conditions,\" Journal of Nuclear Materials, vol. 307, pp. 900-906, Dec 2002, Art no. Pii s0022-3115(02)01120-0, doi: 10.1016/s0022-3115(02)01120-0. [140] S. Jublot-Leclerc, X. Li, L. Legras, F. Fortuna, and A. Gentils, \"Cavity nucleation and growth in dual beam irradiated 316L industrial austenitic stainless steel,\" Journal of Nuclear Materials, vol. 494, pp. 240-251, Oct 2017, doi: 10.1016/j.jnucmat.2017.07.038. [141] V. Gavini, K. Bhattacharya, and M. Ortiz, \"Vacancy clustering and prismatic dislocation loop formation in aluminum,\" Physical Review B, vol. 76, no. 18, Nov 2007, Art no. 180101, doi: 10.1103/PhysRevB.76.180101. 180 [142] F. Gao, D. J. Bacon, L. M. Howe, and C. B. So, \"Temperature-dependence of defect creation and clustering by displacement cascades in alpha-zirconium,\" Journal of Nuclear Materials, vol. 294, no. 3, pp. 288-298, Apr 2001, doi: 10.1016/s0022-3115(01)00483-4. [143] C. C. Matthai and D. J. Bacon, \"THE COLLAPSE OF VACANCY CLUSTERS - A MOLECULAR-DYNAMICS STUDY,\" Journal of Nuclear Materials, vol. 135, no. 2-3, pp. 173-180, 1985, doi: 10.1016/0022-3115(85)90075-3. [144] S. J. Zinkle, L. E. Seitzman, and W. G. Wolfer, \"STABILITY OF VACANCY CLUSTERS IN METALS .1. ENERGY CALCULATIONS FOR PURE METALS,\" Philosophical Magazine a-Physics of Condensed Matter Structure Defects and Mechanical Properties, vol. 55, no. 1, pp. 111-125, Jan 1987, doi: 10.1080/01418618708209803. [145] S. J. Zinkle and E. H. Lee, \"EFFECT OF OXYGEN ON VACANCY CLUSTER MORPHOLOGY IN METALS,\" Metallurgical Transactions a-Physical Metallurgy and Materials Science, vol. 21, no. 5, pp. 1037-1051, May 1990, doi: 10.1007/bf02656525. [146] R. M. Mayer, \"NUCLEATION AND GROWTH OF VOIDS BY RADIATION .5. ROLE OF GAS,\" Journal of Nuclear Materials, vol. 95, no. 1-2, pp. 83-91, 1980, doi: 10.1016/0022-3115(80)90083-5. [147] P. J. Goodhew, \"Inert gas bubbles,\" Materials Science and Technology, vol. 6, no. 10, pp. 950-952, 1990/10/01 1990, doi: 10.1179/026708390790189597. [148] D. E. Rimmer and A. H. Cottrell, \"The solution of inert gas atoms in metals,\" The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, vol. 2, no. 23, pp. 1345-1353, 1957/11/01 1957, doi: 10.1080/14786435708243211. [149] B. Kaiser et al., \"TEM study and modeling of bubble formation in dual-beam He+/Fe3+ ion irradiated EUROFER 97,\" Journal of Nuclear Materials, vol. 484, pp. 59-67, Feb 2017, doi: 10.1016/j.jnucmat.2016.11.014. [150] T. F. Yang et al., \"Effects of He Irradiation on Yttria-Stabilized Zirconia Ceramics,\" Journal of the American Ceramic Society, vol. 98, no. 4, pp. 1314-1322, Apr 2015, doi: 10.1111/jace.13423. [151] C. A. Taylor et al., \"Bubble formation and lattice parameter changes resulting from He irradiation of defect-fluorite Gd2Zr2O7,\" Acta Materialia, vol. 115, pp. 115-122, Aug 2016, doi: 10.1016/j.actamat.2016.05.045. [152] G. Gutierrez et al., \"Helium bubble formation in nuclear glass by in-situ TEM ion implantation,\" Journal of Nuclear Materials, vol. 452, no. 1-3, pp. 565-568, Sep 2014, doi: 10.1016/j.jnucmat.2014.06.010. [153] P. J. Goodhew, \"CAVITY GROWTH-MECHANISM MAPS,\" Scripta Metallurgica, vol. 18, no. 10, pp. 1069-1073, 1984, doi: 10.1016/0036-9748(84)90180-7. [154] S. K. Tyler and P. J. Goodhew, \"Direct evidence for the Brownian motion of helium bubbles,\" Journal of Nuclear Materials, vol. 92, no. 2, pp. 201-206, 1980/09/01/ 1980, doi: https://doi.org/10.1016/0022-3115(80)90103-8. [155] G. S. Was, Fundamentals of Radiation Materials Science. Metals and Alloys, 1st ed. Springer-Verlag Berlin Heidelberg, 2007. [156] H. Trinkaus and B. N. Singh, \"Helium accumulation in metals during irradiation – where do we stand?,\" Journal of Nuclear Materials, vol. 323, no. 2, pp. 229-242, 2003/12/01/ 2003, doi: https://doi.org/10.1016/j.jnucmat.2003.09.001. [157] S. J. Zinkle and C. Kinoshita, \"Defect production in ceramics,\" Journal of Nuclear Materials, vol. 251, pp. 200-217, 1997/11/11/ 1997, doi: https://doi.org/10.1016/S0022-3115(97)00224-9. [158] H. Schroeder and P. F. P. Fichtner, \"ON THE COARSENING MECHANISMS OF HELIUM BUBBLES - OSTWALD RIPENING VERSUS MIGRATION AND COALESCENCE,\" Journal of Nuclear Materials, vol. 179, pp. 1007-1010, Mar-Apr 1991, doi: 10.1016/0022-3115(91)90261-5. [159] J. H. Evans, \"Mechanisms of void coarsening in helium implanted silicon,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 196, no. 1-2, pp. 125-134, Nov 2002, Art no. Pii s0168-583x(02)01290-9, doi: 10.1016/s0168-583x(02)01290-9. [160] S. Furuno et al., \"Ion irradiation and annealing effects in Al2O3 and MgAl2O4,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 127-128, pp. 181-185, 1997/05/02/ 1997, doi: https://doi.org/10.1016/S0168-583X(97)00066-9. 181 [161] A. Ofan et al., \"Spherical solid He nanometer bubbles in an anisotropic complex oxide,\" Physical Review B, vol. 82, no. 10, Sep 2010, Art no. 104113, doi: 10.1103/PhysRevB.82.104113. [162] C. A. Taylor, J. D. Sugar, D. B. Robinson, N. C. Bartelt, R. B. Sills, and K. Hattar, \"Using In Situ TEM Helium Implantation and Annealing to Study Cavity Nucleation and Growth,\" Jom, vol. 72, no. 5, pp. 2032-2041, May 2020, doi: 10.1007/s11837-020-04117-4. [163] V. N. Chernikov, H. Trinkaus, P. Jung, and H. Ullmaier, \"THE FORMATION OF HELIUM BUBBLES NEAR THE SURFACE AND IN THE BULK IN NICKEL DURING POST-IMPLANTATION ANNEALING,\" Journal of Nuclear Materials, vol. 170, no. 1, pp. 31-38, Jan 1990, doi: 10.1016/0022-3115(90)90323-f. [164] J. Strane, L. D. Marks, D. E. Luzzi, M. I. Buckett, J. P. Zhang, and B. W. Wessels, \"ENCAPSULATION, DIFFUSION AND DIET IN THE ELECTRON-MICROSCOPE,\" Ultramicroscopy, vol. 25, no. 3, pp. 253-257, 1988, doi: 10.1016/0304-3991(88)90019-8. [165] M. R. McCartney and D. J. Smith, \"STUDIES OF ELECTRON-IRRADIATION AND ANNEALING EFFECTS ON TIO2 SURFACES IN ULTRAHIGH-VACUUM USING HIGH-RESOLUTION ELECTRON-MICROSCOPY,\" Surface Science, vol. 250, no. 1-3, pp. 169-178, Jul 1991, doi: 10.1016/0039-6028(91)90719-9. [166] W. B. Liu et al., \"Irradiation Induced Microstructure Evolution in Nanostructured Materials: A Review,\" Materials, vol. 9, no. 2, Feb 2016, Art no. 105, doi: 10.3390/ma9020105. [167] F. Y. Lu et al., \"Amorphization of nanocrystalline monoclinic ZrO2 by swift heavy ion irradiation,\" Physical Chemistry Chemical Physics, vol. 14, no. 35, pp. 12295-12300, 2012, doi: 10.1039/c2cp41553d. [168] B. Schuster, M. Lang, R. Klein, C. Trautmann, R. Neumann, and A. Benyagoub, \"Structural phase transition in ZrO2 induced by swift heavy ion irradiation at high-pressure,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 267, no. 6, pp. 964-968, Mar 2009, doi: 10.1016/j.nimb.2009.02.046. [169] W. J. Qin et al., \"Different Radiation Tolerances of Ultrafine-Grained Zirconia-Magnesia Composite Ceramics with Different Grain Sizes,\" Materials, vol. 12, no. 17, Sep 2019, Art no. 2649, doi: 10.3390/ma12172649. [170] T. Nakazawa, V. Grismanovs, D. Yamaki, Y. Katano, and T. Aruga, \"Disordering in Li2TiO3 irradiated with high energy ions,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 206, pp. 166-170, 2003/05/01/ 2003, doi: https://doi.org/10.1016/S0168-583X(03)00712-2. [171] Q. L. Zhou, Y. Oya, T. Chikada, W. Zhang, L. H. Xue, and Y. W. Yan, \"Preparation of Li2TiO3 by hydrothermal synthesis and its structure evolution under high energy Ar+ irradiation,\" Journal of the European Ceramic Society, vol. 37, no. 15, pp. 4955-4961, Dec 2017, doi: 10.1016/j.jeurceramsoc.2017.06.032. [172] N. M. Masaki, K. Noda, H. Watanabe, R. G. Clemmer, and G. W. Hollenberg, \"SPECTROSCOPIC STUDY OF LITHIUM-OXIDE IRRADIATED BY FAST-NEUTRONS,\" Journal of Nuclear Materials, vol. 212, pp. 908-911, Sep 1994, doi: 10.1016/0022-3115(94)90967-9. [173] J. Tiliks, G. Kizane, A. Vitins, G. Vitins, and J. Meisters, \"Physicochemical processes in blanket ceramic materials,\" Fusion Engineering and Design, vol. 69, no. 1-4, pp. 519-522, Sep 2003, doi: 10.1016/s0920-3796(03)00120-0. [174] A. Zarins, A. Supe, G. Kizane, R. Knitter, and L. Baumane, \"Accumulation of radiation defects and products of radiolysis in lithium orthosilicate pebbles with silicon dioxide additions under action of high absorbed doses and high temperature in air and inert atmosphere,\" Journal of Nuclear Materials, vol. 429, no. 1-3, pp. 34-39, Oct 2012, doi: 10.1016/j.jnucmat.2012.05.028. [175] R. A. Verrall, D. H. Rose, J. M. Miller, I. J. Hastings, and D. S. Macdonald, \"BUBBLE FORMATION IN IRRADIATED LI2O,\" Journal of Nuclear Materials, vol. 179, pp. 855-858, Mar-Apr 1991, doi: 10.1016/0022-3115(91)90223-t. [176] G. Hollenberg and D. Baldwin, \"The effect of irradiation on four solid breeder materials,\" Journal of nuclear materials, vol. 133, pp. 242-245, 1985. [177] E. Carella, T. Sauvage, R. Bes, B. Courtois, and M. Gonzalez, \"Nuclear reaction analysis as a tool for the 3He thermal evolution in Li2TiO3 ceramics,\" Nuclear Instruments & Methods in Physics Research Section 182 B-Beam Interactions with Materials and Atoms, vol. 332, pp. 85-89, Aug 2014, doi: 10.1016/j.nimb.2014.02.035. [178] L. J. Zhao et al., \"Tritium release in Li4SiO4 and Li4.2Si0.8Al0.2O4 ceramics,\" Journal of Nuclear Materials, vol. 482, pp. 42-46, Dec 2016, doi: 10.1016/j.jnucmat.2016.10.009. [179] C. E. Johnson, \"Tritium behavior in lithium ceramics,\" Journal of Nuclear Materials, vol. 270, no. 1-2, pp. 212-220, Apr 1999, doi: 10.1016/s0022-3115(98)00905-2. [180] N. Roux, G. Hollenberg, C. Johnson, K. Noda, and R. Verrall, \"SUMMARY OF EXPERIMENTAL RESULTS FOR CERAMIC BREEDER MATERIALS,\" Fusion Engineering and Design, vol. 27, pp. 154-166, Mar 1995, doi: 10.1016/0920-3796(95)90123-x. [181] R. E. Avila, L. A. Pena, and J. C. Jimenez, \"Surface desorption and bulk diffusion models of tritium release from Li2TiO3 and Li2ZrO3 pebbles,\" Journal of Nuclear Materials, vol. 405, no. 3, pp. 244-251, Oct 2010, doi: 10.1016/j.jnucmat.2010.08.009. [182] J. G. van der Laan, H. Kawamura, N. Roux, and D. Yamaki, \"Ceramic breeder research and development: progress and focus,\" Journal of Nuclear Materials, vol. 283, pp. 99-109, Dec 2000, doi: 10.1016/s0022-3115(00)00352-4. [183] H. Wedemeyer, H. Werle, and E. Gunther, \"INFLUENCE OF GRAIN-SIZE AND CARBONATE IMPURITIES ON THE TRITIUM RELEASE FROM LITHIUM ORTHOSILICATE,\" Journal of Nuclear Materials, vol. 191, pp. 240-242, Sep 1992. [184] M. M. W. Peeters, A. J. Magielsen, M. P. Stijkel, and J. G. van der Laan, \"In-pile tritium release behaviour of lithium metatitanate produced by extrusion-spheroidisation-sintering process in EXOTIC-9/1 in the high flux reactor, Petten,\" Fusion Engineering and Design, vol. 82, no. 15-24, pp. 2318-2325, Oct 2007, doi: 10.1016/j.fusengdes.2007.05.036. [185] J. M. Heuser, M. H. H. Kolb, R. Rolli, H. C. Schneider, R. Knitter, and M. Zmitko, \"The HICU PIE results of EU ceramic breeder pebbles: Tritium release properties,\" Journal of Nuclear Materials, vol. 531, Apr 2020, Art no. 152024, doi: 10.1016/j.jnucmat.2020.152024. [186] M. Kobayashi, K. Toda, Y. Oya, and K. Okuno, \"Dependency of irradiation damage density on tritium migration behaviors in Li2TiO3,\" Journal of Nuclear Materials, vol. 447, no. 1-3, pp. 1-8, Apr 2014, doi: 10.1016/j.jnucmat.2013.12.001. [187] J. K. Cockcroft, P. Barnes, M. Attfield, and H. Driessen, \"Powder Diffraction on the Web,\" http://pd.chem.ucl.ac.uk/, (c) 1997 - 2006. [188] C. A. Schneider, W. S. Rasband, and K. W. Eliceiri, \"NIH Image to ImageJ: 25 years of image analysis,\" Nature Methods, vol. 9, no. 7, pp. 671-675, 2012/07/01 2012, doi: 10.1038/nmeth.2089. [189] D. B. Williams and C. B. Carter, Transmission Electron Microscopy: A Textbook for Materials Science, Second Edition. New York: Springer Science+Business Media, 2009. [190] \"OriginPro, Version 2017 . OriginLab Corporation, Northampton, MA, USA.,\" [191] A. Baron-Wiechec et al., \"Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak,\" Fusion Engineering and Design, vol. 133, pp. 135-141, 2018/08/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.05.075. [192] R. Smith, \"MRF Tritium Capability,\" (Presentation slides, July 2015) Personal communication. [193] \"ASTM E112-10, Standard Test Methods for Determining Average Grain Size,\" PA: ASTM International, West Conshohocken, 2010. [194] M. I. Mendelson, \"AVERAGE GRAIN SIZE IN POLYCRYSTALLINE CERAMICS,\" Journal of the American Ceramic Society, vol. 52, no. 8, pp. 443-+, 1969, doi: 10.1111/j.1151-2916.1969.tb11975.x. [195] A. R. C. Gerlt, A. K. Criner, L. Semiatin, and E. J. Payton, \"On the grain size proportionality constants calculated in MI Mendelson's \"Average Grain Size in Polycrystalline Ceramics\",\" Journal of the American Ceramic Society, vol. 102, no. 1, pp. 37-41, Jan 2019, doi: 10.1111/jace.15950. [196] J. C. Wurst and J. A. Nelson, \"LINEAR INTERCEPT TECHNIQUE FOR MEASURING GRAIN-SIZE IN 2-PHASE POLYCRYSTALLINE CERAMICS,\" Journal of the American Ceramic Society, vol. 55, no. 2, pp. 109-&, 1972, doi: 10.1111/j.1151-2916.1972.tb11224.x. [197] R. Knitter, B. Alm, and G. Roth, \"Crystallisation and microstructure of lithium orthosilicate pebbles,\" Journal of Nuclear Materials, vol. 367, pp. 1387-1392, Aug 2007, doi: 10.1016/j.jnucmat.2007.04.002. 183 [198] I. M. Lifshitz and V. V. Slyozov, \"The kinetics of precipitation from supersaturated solid solutions,\" Journal of Physics and Chemistry of Solids, vol. 19, no. 1, pp. 35-50, 1961/04/01/ 1961, doi: https://doi.org/10.1016/0022-3697(61)90054-3. [199] C. Wagner, \"THEORIE DER ALTERUNG VON NIEDERSCHLAGEN DURCH UMLOSEN (OSTWALD-REIFUNG),\" Zeitschrift Fur Elektrochemie, vol. 65, no. 7-8, pp. 581-591, 1961. [200] E. Snoeck, J. Majimel, M. O. Ruault, and M. J. Hytch, \"Characterization of helium bubble size and faceting by electron holography,\" Journal of Applied Physics, vol. 100, no. 2, Jul 2006, Art no. 023519, doi: 10.1063/1.2216791. [201] S. T. Murphy and N. D. M. Hine, \"Point Defects and Non-stoichiometry in Li2TiO3,\" Chemistry of Materials, vol. 26, no. 4, pp. 1629-1638, 2014/02/25 2014, doi: 10.1021/cm4038473. [202] A. I. Van Sambeek, R. S. Averback, C. P. Flynn, and M. H. Yang, \"Radiation enhanced diffusion in MgO,\" in Symposium on Microstructure of Irradiated Materials, at the 1994 MRS Fall Meeting, Boston, Ma, Nov 29-Dec 01 1994, vol. 373, in Materials Research Society Symposium Proceedings, 1995, pp. 293-298. [Online]. Available: <Go to ISI>://WOS:A1995BD31C00043 [203] J. C. Bourgoin, J. W. Corbett, and H. L. Frisch, \"IONIZATION ENHANCED DIFFUSION,\" Journal of Chemical Physics, vol. 59, no. 8, pp. 4042-4046, 1973, doi: 10.1063/1.1680596. [204] C. Fan et al., \"Irradiation induced void spheroidization, shrinkage and migration in Cu at elevated temperatures: An in situ study,\" Acta Materialia, vol. 201, pp. 504-516, 2020/12/01/ 2020, doi: https://doi.org/10.1016/j.actamat.2020.10.008. [205] Y. Furuyama, K. Yahata, R. Nakamori, A. Taniike, H. Samata, and A. Kitamura, \"CO2 absorption characteristics of a Li2TiO3 blanket material under atmospheric exposure,\" Journal of Nuclear Materials, vol. 455, no. 1, pp. 527-530, 2014/12/01/ 2014, doi: https://doi.org/10.1016/j.jnucmat.2014.08.007. [206] U. Fischer et al., \"Comparison of nuclear irradiation parameters of fusion breeder materials in high flux fission test reactors and a fusion power demonstration reactor,\" Journal of Nuclear Materials, vol. 280, no. 2, pp. 151-161, 2000/07/01/ 2000, doi: https://doi.org/10.1016/S0022-3115(00)00049-0. [207] J. Shimwell et al., \"Spatially and temporally varying tritium generation in solid-type breeder blankets,\" Fusion Engineering and Design, vol. 98-99, pp. 1868-1871, Oct 2015, doi: 10.1016/j.fusengdes.2015.04.018. [208] Z. Shen, M. Johnsson, Z. Zhao, and M. Nygren, \"Spark Plasma Sintering of Alumina,\" Journal of the American Ceramic Society, https://doi.org/10.1111/j.1151-2916.2002.tb00381.x vol. 85, no. 8, pp. 1921-1927, 2002/08/01 2002, doi: https://doi.org/10.1111/j.1151-2916.2002.tb00381.x. [209] A. Hollingsworth et al., \"Comparative study of deuterium retention in irradiated Eurofer and Fe-Cr from a new ion implantation materials facility,\""]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["doctoral"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["Ph.D"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.grantnumber","label":"Dc Identifier Grantnumber","values":["X/13205-xx"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://etheses.whiterose.ac.uk/id/eprint/31702/1/Thesis_Waters_S_160122646_PostCorrections.pdf","https://etheses.whiterose.ac.uk/id/eprint/31702/2/Supplementary_File_1a_Spreadsheet_DefectMeasurement_Waters_S_160122646.xlsx","https://etheses.whiterose.ac.uk/id/eprint/31702/3/Supplementary_File_1b_ExampleDataSet_Waters_S_160122646.csv","https://etheses.whiterose.ac.uk/id/eprint/31702/4/Supplementary_File_1c_Instructions_for_Spreadsheet.txt","https://etheses.whiterose.ac.uk/id/eprint/31702/5/Supplementary_File_2_Video%28Accelerated_40x%29_Waters_S_160122646.avi"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Polycrystalline lithium metatitanate (Li2TiO3) is an attractive material for a range of applications including battery materials and microwave dielectrics, it has also attracted a great deal of attention as proposed tritium breeder material for use in nuclear fusion reactors. During the continued development of Li2TiO3, and similar Li-containing ceramics, for these advanced applications, transmission electron microscopy (TEM) is likely to be employed to study the nano-structure of these materials and, in the case of nuclear fusion applications, their response to radiation induced damage. In this project, the effects of ceramic processing conditions on the microstructure of Li2TiO3 ceramics was first identified. The effects of ceramic microstructure on the behaviour of Li2TiO3 under electron irradiation was subsequently investigated. Results show that electron irradiation in a conventional TEM results in the formation of nanometre sized vacancy-type defects at room temperature, and that the size and number density of the vacancy-type defects are linked to ceramic microstructure and crystallographic disorder. Electron beam induced vacancy-type defect formation is discussed in terms of electron beam heating, electron beam induced radiolysis and electron beam induced displacement damage; the displacement of Li and O lattice atoms is proposed to be primarily responsible for the observed damage. Results suggest that the formation and growth of vacancy-type defects is initially driven by the supersaturation of vacancies due to the preferential loss of interstitials to the surfaces of thin film TEM specimens, followed by coalescence of larger vacancy-type defects, which leads to cavity growth. Results from X-ray diffraction suggest that growth at room temperature may be facilitated by the presence of CO2, produced by the decomposition of a Li2CO3 surface reaction layer under the electron beam. These results highlight that care must be taken when interpreting TEM data and undertaking the associated analysis, especially in Li-containing oxides. Following the discovery of electron beam induced cavity formation in Li2TiO3, the thermal evolution of these cavities at temperatures relevant to fusion breeder blanket operating conditions was investigated using in-situ thermal annealing experiments, which were carried out under electron irradiation in a TEM. The effects of temperature, electron beam exposure time, and ceramic microstructure on cavity growth dynamics are discussed. The rate and extent of cavity growth was found to be significantly enhanced at elevated temperature, this is primarily attributed to the increased mobility of defects introduced as a result of electron beam induced displacement damage. Minimising exposure of thin-film TEM specimens to the electron beam was found to significantly 14 reduce the extent of cavity growth, particularly at high temperatures, indicating that cavity growth is strongly dependent on electron fluence. The microstructural properties of low porosity and large grain size may increase the resistance of Li2TiO3 to electron beam damage. This is attributed to the longer diffusion path to defect sinks associated with large grain size and low porosity, resulting in a reduction of preferential interstitial loss and increased probability of defect recombination; thus reducing the excess vacancy concentration responsible for cavity growth in the bulk. A distinct correlation between the temperature at which significant quantities of CO2 were released from bulk Li2TiO3 samples (revealed by the results of thermal desorption spectroscopy (TDS) experiments) and accelerated cavity growth in thin film specimens was identified. Hence it is proposed that enhanced cavity growth under electron irradiation at elevated temperature in Li2TiO3 may be facilitated by CO2 gas produced as a result of the thermal decomposition of an Li2CO3 surface reaction layer. The accumulation of helium in Li2TiO3 samples with different microstructural properties was investigated using in-situ helium ion implantation. The influence of the interactions of implanted helium with electron beam induced radiation defects on cavity / gas bubble growth at elevated temperatures was investigated using complimentary in-situ thermal annealing experiments. Helium was found to accumulate to a greater extent in samples of low porosity and large grain size. The extent of cavity / bubble growth was found to be significantly exacerbated at elevated temperatures in samples which exhibited high helium retention. Such cavities have the potential to trap tritium in a working breeder blanket, thereby impeding its release and increasing tritium inventory, both of which would be detrimental to material performance. In the absence of implanted helium, the microstructural properties of large grain size and low porosity appear to increase the radiation tolerance of Li2TiO3 to displacement damage induced by electron irradiation. However, since the presence of helium has been shown to severely exacerbate cavity growth in Li2TiO3, the increased helium retention by specimens of low porosity and large grain size in fact resulted in a greater extent of cavity growth in such specimens at temperatures relevant to breeder blanket operating conditions. As such, the properties of high porosity and small grain size are likely to be beneficial for the optimisation of the performance of Li2TiO3 ceramic breeder materials from the perspective of reducing cavity formation at breeder blanket operating temperatures when the effects of helium are taken into account."]},{"key":"dc:format","label":"Dc Format","values":["text","spreadsheet","video"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Electron Beam Induced Damage and Helium Accumulation in Lithium Metatitanate Ceramic Breeder Materials"]}]}],"canonical_facts":{"dc:contributor.advisor":["Gandy, Amy"],"dc:contributor.sponsor":["UKAEA","EPSRC","The University of Sheffield"],"dc:creator":["Waters, Samuel John"],"dc:date":["2021-04"],"dc:date.issued":["2021-04"],"dc:description.abstract":["Polycrystalline lithium metatitanate (Li2TiO3) is an attractive material for a range of applications including battery materials and microwave dielectrics, it has also attracted a great deal of attention as proposed tritium breeder material for use in nuclear fusion reactors. During the continued development of Li2TiO3, and similar Li-containing ceramics, for these advanced applications, transmission electron microscopy (TEM) is likely to be employed to study the nano-structure of these materials and, in the case of nuclear fusion applications, their response to radiation induced damage. In this project, the effects of ceramic processing conditions on the microstructure of Li2TiO3 ceramics was first identified. The effects of ceramic microstructure on the behaviour of Li2TiO3 under electron irradiation was subsequently investigated. Results show that electron irradiation in a conventional TEM results in the formation of nanometre sized vacancy-type defects at room temperature, and that the size and number density of the vacancy-type defects are linked to ceramic microstructure and crystallographic disorder. Electron beam induced vacancy-type defect formation is discussed in terms of electron beam heating, electron beam induced radiolysis and electron beam induced displacement damage; the displacement of Li and O lattice atoms is proposed to be primarily responsible for the observed damage. Results suggest that the formation and growth of vacancy-type defects is initially driven by the supersaturation of vacancies due to the preferential loss of interstitials to the surfaces of thin film TEM specimens, followed by coalescence of larger vacancy-type defects, which leads to cavity growth. Results from X-ray diffraction suggest that growth at room temperature may be facilitated by the presence of CO2, produced by the decomposition of a Li2CO3 surface reaction layer under the electron beam. These results highlight that care must be taken when interpreting TEM data and undertaking the associated analysis, especially in Li-containing oxides. Following the discovery of electron beam induced cavity formation in Li2TiO3, the thermal evolution of these cavities at temperatures relevant to fusion breeder blanket operating conditions was investigated using in-situ thermal annealing experiments, which were carried out under electron irradiation in a TEM. The effects of temperature, electron beam exposure time, and ceramic microstructure on cavity growth dynamics are discussed. The rate and extent of cavity growth was found to be significantly enhanced at elevated temperature, this is primarily attributed to the increased mobility of defects introduced as a result of electron beam induced displacement damage. Minimising exposure of thin-film TEM specimens to the electron beam was found to significantly 14 reduce the extent of cavity growth, particularly at high temperatures, indicating that cavity growth is strongly dependent on electron fluence. The microstructural properties of low porosity and large grain size may increase the resistance of Li2TiO3 to electron beam damage. This is attributed to the longer diffusion path to defect sinks associated with large grain size and low porosity, resulting in a reduction of preferential interstitial loss and increased probability of defect recombination; thus reducing the excess vacancy concentration responsible for cavity growth in the bulk. A distinct correlation between the temperature at which significant quantities of CO2 were released from bulk Li2TiO3 samples (revealed by the results of thermal desorption spectroscopy (TDS) experiments) and accelerated cavity growth in thin film specimens was identified. Hence it is proposed that enhanced cavity growth under electron irradiation at elevated temperature in Li2TiO3 may be facilitated by CO2 gas produced as a result of the thermal decomposition of an Li2CO3 surface reaction layer. The accumulation of helium in Li2TiO3 samples with different microstructural properties was investigated using in-situ helium ion implantation. The influence of the interactions of implanted helium with electron beam induced radiation defects on cavity / gas bubble growth at elevated temperatures was investigated using complimentary in-situ thermal annealing experiments. Helium was found to accumulate to a greater extent in samples of low porosity and large grain size. The extent of cavity / bubble growth was found to be significantly exacerbated at elevated temperatures in samples which exhibited high helium retention. Such cavities have the potential to trap tritium in a working breeder blanket, thereby impeding its release and increasing tritium inventory, both of which would be detrimental to material performance. In the absence of implanted helium, the microstructural properties of large grain size and low porosity appear to increase the radiation tolerance of Li2TiO3 to displacement damage induced by electron irradiation. However, since the presence of helium has been shown to severely exacerbate cavity growth in Li2TiO3, the increased helium retention by specimens of low porosity and large grain size in fact resulted in a greater extent of cavity growth in such specimens at temperatures relevant to breeder blanket operating conditions. As such, the properties of high porosity and small grain size are likely to be beneficial for the optimisation of the performance of Li2TiO3 ceramic breeder materials from the perspective of reducing cavity formation at breeder blanket operating temperatures when the effects of helium are taken into account."],"dc:format":["text","spreadsheet","video"],"dc:identifier.grantnumber":["X/13205-xx"],"dc:identifier.uri":["https://etheses.whiterose.ac.uk/id/eprint/31702/1/Thesis_Waters_S_160122646_PostCorrections.pdf","https://etheses.whiterose.ac.uk/id/eprint/31702/2/Supplementary_File_1a_Spreadsheet_DefectMeasurement_Waters_S_160122646.xlsx","https://etheses.whiterose.ac.uk/id/eprint/31702/3/Supplementary_File_1b_ExampleDataSet_Waters_S_160122646.csv","https://etheses.whiterose.ac.uk/id/eprint/31702/4/Supplementary_File_1c_Instructions_for_Spreadsheet.txt","https://etheses.whiterose.ac.uk/id/eprint/31702/5/Supplementary_File_2_Video%28Accelerated_40x%29_Waters_S_160122646.avi"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["Materials Science and Engineering (Sheffield)"],"dc:publisher.institution":["University of Sheffield"],"dc:relation.isreferencedby":["https://etheses.whiterose.ac.uk/id/eprint/31702/"],"dc:relation.references":["[1] C. L. Smith and S. Cowley, \"The path to fusion power,\" Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, vol. 368, no. 1914, pp. 1091-1108, Mar 2010, doi: 10.1098/rsta.2009.0216. [2] M. Kikuchi and K. Lackner, Fusion Physics. International Atomic Energy Agency (IAEA): IAEA, 2012. [3] L. V. Boccaccini et al., \"Objectives and status of EUROfusion DEMO blanket studies,\" Fusion Engineering and Design, vol. 109, pp. 1199-1206, Nov 2016, doi: 10.1016/j.fusengdes.2015.12.054. [4] F. A. Hern et al., \"Overview of the HCPB Research Activities in EUROfusion,\" IEEE Transactions on Plasma Science, vol. 46, no. 6, pp. 2247-2261, 2018, doi: 10.1109/TPS.2018.2830813. [5] F. A. Hernández et al., \"An enhanced, near-term HCPB design as driver blanket for the EU DEMO,\" Fusion Engineering and Design, vol. 146, pp. 1186-1191, 2019/09/01/ 2019, doi: https://doi.org/10.1016/j.fusengdes.2019.02.037. [6] G. Federici, L. Boccaccini, F. Cismondi, M. Gasparotto, Y. Poitevin, and I. Ricapito, \"An overview of the EU breeding blanket design strategy as an integral part of the DEMO design effort,\" Fusion Engineering and Design, vol. 141, pp. 30-42, Apr 2019, doi: 10.1016/j.fusengdes.2019.01.141. [7] M. Abdou et al., \"Blanket/first wall challenges and required R&D on the pathway to DEMO,\" Fusion Engineering and Design, vol. 100, pp. 2-43, Nov 2015, doi: 10.1016/j.fusengdes.2015.07.021. [8] R. Knitter, M. H. H. Kolb, U. Kaufmann, and A. A. Goraieb, \"Fabrication of modified lithium orthosilicate pebbles by addition of titania,\" Journal of Nuclear Materials, vol. 442, no. 1-3, pp. S433-S436, Nov 2013, doi: 10.1016/j.jnucmat.2012.10.034. [9] S. Liu et al., \"Conceptual design of the water cooled ceramic breeder blanket for CFETR based on pressurized water cooled reactor technology,\" Fusion Engineering and Design, vol. 124, pp. 865-870, 2017/11/01/ 2017, doi: https://doi.org/10.1016/j.fusengdes.2017.02.065. [10] E. R. Kumar, K. N. Vyas, and T. Jayakumar, \"Overview of LLCB TBM design and R&D activities in India,\" Fusion Engineering and Design, vol. 109-111, pp. 1522-1527, 2016/11/01/ 2016, doi: https://doi.org/10.1016/j.fusengdes.2015.11.038. [11] Y. Kawamura et al., \"Status of water cooled ceramic breeder blanket development,\" Fusion Engineering and Design, vol. 136, pp. 1550-1556, 2018/11/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.05.055. [12] R. Knitter, P. Chaudhuri, Y. J. Feng, T. Hoshino, and I. K. Yu, \"Recent developments of solid breeder fabrication,\" Journal of Nuclear Materials, vol. 442, no. 1-3, pp. S420-S424, Nov 2013, doi: 10.1016/j.jnucmat.2013.02.060. [13] C. E. Kessel et al., \"Overview of the fusion nuclear science facility, a credible break-in step on the path to fusion energy,\" Fusion Engineering and Design, vol. 135, Part B, pp. 236-270, Oct 2018, doi: https://doi.org/10.1016/j.fusengdes.2017.05.081. [14] M. Oyaidzu et al., \"Correlation between annihilation of radiation defects and tritium release in Li2TiO3,\" Journal of Nuclear Materials, vol. 329, pp. 1313-1317, Aug 2004, doi: 10.1016/j.jnucmat.2004.04.223. [15] M. Kobayashi, Y. Oya, K. Munakata, and K. Okuno, \"Developing a tritium release model for Li2TiO3 with irradiation-induced defects,\" Journal of Nuclear Materials, vol. 458, pp. 22-28, Mar 2015, doi: 10.1016/j.jnucmat.2014.11.047. [16] K. Toda et al., \"Correlation between release of deuterium and annihilation of irradiation defects produced by gamma-ray in Li2TiO3,\" Fusion Engineering and Design, vol. 88, no. 9-10, pp. 2369-2372, Oct 2013, doi: 10.1016/j.fusengdes.2013.05.006. 173 [17] M. Klimenkov, E. Materna-Morris, and A. Moslang, \"Characterization of radiation induced defects in EUROFER 97 after neutron irradiation,\" (in English), Journal of Nuclear Materials, Article; Proceedings Paper vol. 417, no. 1-3, pp. 124-126, Oct 2011, doi: 10.1016/j.jnucmat.2010.12.261. [18] R. M. Mayer and L. M. Brown, \"Nucleation and growth of voids by radiation: I. Formulation of the problem,\" Journal of Nuclear Materials, vol. 95, no. 1, pp. 46-57, 1980/11/01/ 1980, doi: https://doi.org/10.1016/0022-3115(80)90079-3. [19] C. A. Taylor et al., \"Investigating Helium Bubble Nucleation and Growth through Simultaneous In-Situ Cryogenic, Ion Implantation, and Environmental Transmission Electron Microscopy,\" Materials, vol. 12, no. 16, Aug 2019, Art no. 2618, doi: 10.3390/ma12162618. [20] S. J. Zinkle, \"Effect of H and He irradiation on cavity formation and blistering in ceramics,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 286, pp. 4-19, Sep 2012, doi: 10.1016/j.nimb.2012.03.030. [21] B. N. Singh and A. J. E. Foreman, \"An assessment of void nucleation by gas atoms during irradiation,\" Journal of Nuclear Materials, vol. 104, pp. 1469-1474, 1981/01/01/ 1981, doi: https://doi.org/10.1016/0022-3115(82)90807-8. [22] R. M. Mayer, W. M. Stobbs, and P. R. Ward, \"The effect of gas on the irradiation of aluminium inside a high voltage electron microscope,\" Journal of Microscopy, https://doi.org/10.1111/j.1365-2818.1975.tb04039.x vol. 105, no. 1, pp. 87-95, 1975/09/01 1975, doi: https://doi.org/10.1111/j.1365-2818.1975.tb04039.x. [23] R. E. Stoller, \"THE INFLUENCE OF HELIUM ON MICROSTRUCTURAL EVOLUTION - IMPLICATIONS FOR DT FUSION-REACTORS,\" Journal of Nuclear Materials, vol. 174, no. 2-3, pp. 289-310, Nov 1990, doi: 10.1016/0022-3115(90)90242-f. [24] M. Kobayashi, H. Uchimura, K. Toda, and Y. Oya, \"Effects of helium and ambient water vapor on tritium release from Li2TiO3,\" Journal of Nuclear Materials, vol. 455, no. 1-3, pp. 735-738, Dec 2014, doi: 10.1016/j.jnucmat.2014.08.058. [25] M. Rose, A. G. Balogh, and H. Hahn, \"Instability of irradiation induced defects in nanostructured materials,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 127-128, pp. 119-122, 1997/05/02/ 1997, doi: https://doi.org/10.1016/S0168-583X(96)00863-4. [26] B. Muntifering et al., \"Cavity Evolution at Grain Boundaries as a Function of Radiation Damage and Thermal Conditions in Nanocrystalline Nickel,\" Materials Research Letters, vol. 4, no. 2, pp. 96-103, 2016, doi: 10.1080/21663831.2015.1121165. [27] X. M. Bai, A. F. Voter, R. G. Hoagland, M. Nastasi, and B. P. Uberuaga, \"Efficient Annealing of Radiation Damage Near Grain Boundaries via Interstitial Emission,\" Science, vol. 327, no. 5973, pp. 1631-1634, Mar 2010, doi: 10.1126/science.1183723. [28] T. D. Shen, S. Feng, M. Tang, J. A. Valdez, Y. Wang, and K. E. Sickafus, \"Enhanced radiation tolerance in nanocrystalline MgGa2O4,\" Applied Physics Letters, vol. 90, no. 26, Jun 2007, Art no. 263115, doi: 10.1063/1.2753098. [29] Z. Y. Huang et al., \"Defect-fluorite Gd2Zr2O7 ceramics under helium irradiation: Amorphization, cell volume expansion, and multi-stage bubble formation,\" Journal of the American Ceramic Society, vol. 102, no. 8, pp. 4911-4918, Aug 2019, doi: 10.1111/jace.16364. [30] S. Dey et al., \"Radiation Tolerance of Nanocrystalline Ceramics: Insights from Yttria Stabilized Zirconia,\" Scientific Reports, vol. 5, Jan 2015, Art no. 7746, doi: 10.1038/srep07746. [31] W. F. Cureton et al., \"Grain size effects on irradiated CeO2, ThO2, and UO2,\" Acta Materialia, vol. 160, pp. 47-56, Nov 2018, doi: 10.1016/j.actamat.2018.08.040. [32] O. El-Atwani et al., \"The role of grain size in He bubble formation: Implications for swelling resistance,\" Journal of Nuclear Materials, vol. 484, pp. 236-244, Feb 2017, doi: 10.1016/j.jnucmat.2016.12.003. [33] M. Zmitko et al., \"Development and qualification of functional materials for the EU Test Blanket Modules: Strategy and R&D activities,\" Journal of Nuclear Materials, vol. 417, no. 1-3, pp. 678-683, Oct 2011, doi: 10.1016/j.jnucmat.2011.02.009. 174 [34] A. Zarins et al., \"Behaviour of advanced tritium breeder pebbles under simultaneous action of accelerated electrons and high temperature,\" Fusion Engineering and Design, vol. 121, pp. 167-173, 2017/10/01/ 2017, doi: https://doi.org/10.1016/j.fusengdes.2017.06.033. [35] M. Lang et al., \"Swift heavy ion-induced amorphization of CaZrO3 perovskite,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 286, pp. 271-276, 2012/09/01/ 2012, doi: https://doi.org/10.1016/j.nimb.2011.12.028. [36] M. Klimenkov, P. Vladimirov, J. Hoffmann, N. Zimber, A. Moslang, and V. Kuksenko, \"First simultaneous detection of helium and tritium inside bubbles in beryllium,\" Micron, vol. 127, Dec 2019, Art no. 102754, doi: 10.1016/j.micron.2019.102754. [37] N. Sasajima, T. Matsui, S. Furuno, K. Hojou, and H. Otsu, \"Damage accumulation in Al2O3 during H2+ or He+ ion irradiation,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 148, no. 1, pp. 745-751, 1999/01/02/ 1999, doi: https://doi.org/10.1016/S0168-583X(98)00810-6. [38] N. T. Wu, H. Wu, H. Liu, and Y. Zhang, \"Solvothermal coating LiNi0.8Co0.15Al0.05O2 microspheres with nanoscale Li2TiO3 shell for long lifespan Li-ion battery cathode materials,\" Journal of Alloys and Compounds, vol. 665, pp. 48-56, Apr 2016, doi: 10.1016/j.jallcom.2016.01.044. [39] L. Q. Zhang and H. Noguchi, \"Novel layered Li-Cr-Ti-O cathode materials related to the LiCrO2-Li2TiO3 solid solution,\" Journal of the Electrochemical Society, vol. 150, no. 5, pp. A601-A607, May 2003, doi: 10.1149/1.1566016. [40] K. Meng, Z. X. Wang, H. J. Guo, X. H. Li, and D. Wang, \"Improving the cycling performance of LiNi0.8Co0.1Mn0.1O2 by surface coating with Li2TiO3,\" Electrochimica Acta, vol. 211, pp. 822-831, Sep 2016, doi: 10.1016/j.electacta.2016.06.110. [41] Y. W. Li et al., \"High performance Co3O4/Li2TiO3 composite hollow nanofibers as anode material for Li-ion batteries,\" Journal of Materials Science-Materials in Electronics, vol. 29, no. 16, pp. 14222-14231, Aug 2018, doi: 10.1007/s10854-018-9555-5. [42] Y. Wang, A. Zhou, X. Dai, L. Feng, J. Li, and J. Li, \"Solid-state synthesis of submicron-sized Li4Ti5O12/Li2TiO3 composites with rich grain boundaries for lithium ion batteries,\" Journal of Power Sources, vol. 266, pp. 114-120, 2014/11/15/ 2014, doi: https://doi.org/10.1016/j.jpowsour.2014.05.002. [43] H. S. Bhatti et al., \"Electrochemical Characteristics and Li+ Ion Intercalation Kinetics of Dual-Phase Li4Ti5O12/Li2TiO3 Composite in the Voltage Range 0-3 V,\" Journal of Physical Chemistry C, vol. 120, no. 18, pp. 9553-9561, May 2016, doi: 10.1021/acs.jpcc.5b12114. [44] A. Lakshmi-Narayana, M. Dhananjaya, N. Guru-Prakash, O. Hussain, A. Mauger, and C. Julien, \"Li2TiO3/Graphene and Li2TiO3/CNT Composites as Anodes for High Power Li-Ion Batteries,\" ChemistrySelect, vol. 3, no. 31, pp. 9150-9158, 2018. [45] Y.-z. Hao, Q.-l. Zhang, J. Zhang, C.-r. Xin, and H. Yang, \"Enhanced sintering characteristics and microwave dielectric properties of Li2TiO3 due to nano-size and nonstoichiometry effect,\" Journal of Materials Chemistry, 10.1039/C2JM33788F vol. 22, no. 45, pp. 23885-23892, 2012, doi: 10.1039/C2JM33788F. [46] Y.-Z. Hao, H. Yang, G.-H. Chen, and Q.-L. Zhang, \"Microwave dielectric properties of Li2TiO3 ceramics doped with LiF for LTCC applications,\" Journal of Alloys and Compounds, vol. 552, pp. 173-179, 2013/03/05/ 2013, doi: https://doi.org/10.1016/j.jallcom.2012.10.110. [47] V. C. Martins et al., \"High thermal stability of Li2TiO3-Al2O3 composite in the microwave C-Band,\" Journal of Physics and Chemistry of Solids, vol. 125, pp. 51-56, 2019/02/01/ 2019, doi: https://doi.org/10.1016/j.jpcs.2018.10.011. [48] A. Lakshmi Narayana, M. Dhananjaya, N. Guru Prakash, O. M. Hussain, and C. M. Julien, \"Nanocrystalline Li2TiO3 electrodes for supercapattery application,\" Ionics, vol. 23, no. 12, pp. 3419-3428, 2017/12/01 2017, doi: 10.1007/s11581-017-2147-1. [49] C. E. Johnson, K. R. Kummerer, and E. Roth, \"CERAMIC BREEDER MATERIALS,\" Journal of Nuclear Materials, vol. 155, pp. 188-201, Jul 1988, doi: 10.1016/0022-3115(88)90240-1. [50] https://www.iter.org/sci/Fusion 175 [51] A. Donato, \"A critical review of Li2O ceramic breeder material properties correlations and data,\" Fusion Engineering and Design, vol. 38, no. 4, pp. 369-392, Feb 1998, doi: 10.1016/s0920-3796(97)00123-3. [52] F. A. Hernández and P. Pereslavtsev, \"First principles review of options for tritium breeder and neutron multiplier materials for breeding blankets in fusion reactors,\" Fusion Engineering and Design, vol. 137, pp. 243-256, 2018/12/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.09.014. [53] S. Cho et al., \"Investigation of technical gaps between DEMO blanket and HCCR TBM,\" Fusion Engineering and Design, vol. 136, pp. 190-198, 2018/11/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.01.050. [54] Y. Kawamura et al., \"Progress of R&D on water cooled ceramic breeder for ITER test blanket system and DEMO,\" Fusion Engineering and Design, vol. 109-111, pp. 1637-1643, 2016/11/01/ 2016, doi: https://doi.org/10.1016/j.fusengdes.2015.11.002. [55] T. Hoshino, \"Pebble fabrication of super advanced tritium breeders using a solid solution of Li2+xTiO3+y with Li2ZrO3,\" Nuclear Materials and Energy, vol. 9, pp. 221-226, 2016/12/01/ 2016, doi: https://doi.org/10.1016/j.nme.2016.05.004. [56] R. Knitter and B. Löbbecke, \"Reprocessing of lithium orthosilicate breeder material by remelting,\" Journal of Nuclear Materials, vol. 361, no. 1, pp. 104-111, 2007/03/31/ 2007, doi: https://doi.org/10.1016/j.jnucmat.2006.11.005. [57] H. Kleykamp, \"Phase equilibria in the Li-Ti-O system and physical properties of Li2TiO3,\" Fusion Engineering and Design, vol. 61-62, pp. 361-366, Nov 2002, Art no. Pii s0920-3796(02)00120-5, doi: 10.1016/s0920-3796(02)00120-5. [58] A. Laumann et al., \"In-situ Synchrotron X-ray Diffraction Study of the Formation of Cubic Li2TiO3 Under Hydrothermal Conditions,\" European Journal of Inorganic Chemistry, no. 14, pp. 2221-2226, May 2011, doi: 10.1002/ejic.201001133. [59] G. Izquierdo and A. R. West, \"PHASE-EQUILIBRIA IN THE SYSTEM Li2O-TiO2,\" Materials Research Bulletin, vol. 15, no. 11, pp. 1655-1660, 1980, doi: 10.1016/0025-5408(80)90248-2. [60] M. Zmitko et al., \"Development and qualification of functional materials for the European HCPB TBM,\" Fusion Engineering and Design, vol. 136, pp. 1376-1385, Nov 2018, doi: 10.1016/j.fusengdes.2018.05.014. [61] K. Kataoka et al., \"Crystal growth and structure refinement of monoclinic Li2TiO3,\" Materials Research Bulletin, vol. 44, no. 1, pp. 168-172, 1/8/ 2009, doi: http://doi.org/10.1016/j.materresbull.2008.03.015. [62] J. F. Dorrian and R. E. Newnham, \"Refinement of the structure of Li2TiO3,\" Materials Research Bulletin, vol. 4, no. 3, pp. 179-183, 3// 1969, doi: http://doi.org/10.1016/0025-5408(69)90054-3. [63] Images generated using CrystalMaker®: a crystal and molecular structures program for Mac and Windows. CrystalMaker Software Ltd, Oxford, England (www.crystalmaker.com) [64] D. Tranqui, R. D. Shannon, H. Y. Chen, S. Iijima, and W. H. Baur, \"CRYSTAL-STRUCTURE OF ORDERED Li4SiO4,\" (in English), Acta Crystallographica Section B-Structural Science, Article vol. 35, no. NOV, pp. 2479-2487, 1979, doi: 10.1107/s0567740879009730. [65] B. Dejong, D. Ellerbroek, and A. L. Spek, \"LOW-TEMPERATURE STRUCTURE OF LITHIUM NESOSILICATE, Li4SiO4, AND ITS Li1S AND O1S X-RAY PHOTOELECTRON-SPECTRUM,\" Acta Crystallographica Section B-Structural Science, vol. 50, pp. 511-518, Oct 1994, doi: 10.1107/s0108768194002375. [66] H. Migge, \"ESTIMATION OF FREE-ENERGIES FOR Li8SiO6 AND Li4SiO4 AND CALCULATION OF THE PHASE-DIAGRAM OF THE Li-Si-O SYSTEM,\" Journal of Nuclear Materials, vol. 151, no. 2, pp. 101-107, Jan 1988, doi: 10.1016/0022-3115(88)90061-x. [67] G. W. Hollenberg, \"A TRANSFORMATION IN LITHIUM ORTHOSILICATE,\" Journal of Nuclear Materials, vol. 103, no. 1-3, pp. 591-595, 1982. [68] P. C. Soares, E. D. Zanotto, V. M. Fokin, and H. Jain, \"TEM and XRD study of early crystallization of lithium disilicate glasses,\" Journal of Non-Crystalline Solids, vol. 331, no. 1-3, pp. 217-227, Dec 2003, doi: 10.1016/j.jnoncrysol.2003.08.075. 176 [69] D. Vollath and H. Wedemeyer, \"ON THE PREPARATION OF THE LITHIUM SILICATES SERIES FROM Li2SiO3 TO Li8SiO6 IN ALCOHOLIC MEDIA,\" Journal of Nuclear Materials, vol. 141, pp. 334-338, Nov-Dec 1986, doi: 10.1016/s0022-3115(86)80060-5. [70] S. Claus, H. Kleykamp, and W. SmykatzKloss, \"Phase equilibria in the Li4SiO4-Li2SiO3 region of the pseudobinary Li2O-SiO2 system,\" Journal of Nuclear Materials, vol. 230, no. 1, pp. 8-11, May 1996, doi: 10.1016/0022-3115(96)00022-0. [71] S. Pupeschi, R. Knitter, and M. Kamlah, \"Effective thermal conductivity of advanced ceramic breeder pebble beds,\" Fusion Engineering and Design, vol. 116, pp. 73-80, Mar 2017, doi: 10.1016/j.fusengdes.2017.01.026. [72] A. Ying et al., \"Status and perspective of the R&D on ceramic breeder materials for testing in ITER,\" Journal of Nuclear Materials, vol. 367–370, Part B, pp. 1281-1286, 8/1/ 2007, doi: http://doi.org/10.1016/j.jnucmat.2007.03.240. [73] K. F. Hesse, \"REFINEMENT OF CRYSTAL-STRUCTURE OF LITHIUM POLYSILICATE,\" Acta Crystallographica Section B-Structural Science, vol. 33, no. MAR15, pp. 901-902, 1977, doi: 10.1107/s0567740877004932. [74] S. Kutolin and N. Druz, \"Effect of synthesis conditions on the structure and properties of lithium metazirconate,\" Inorg. Mater, vol. 1, pp. 1590-1592, 1965. [75] G. P. Wyers and E. H. P. Cordfunke, \"PHASE-RELATIONS IN THE SYSTEM Li2O ZrO2,\" Journal of Nuclear Materials, vol. 168, no. 1-2, pp. 24-30, Oct-Nov 1989, doi: 10.1016/0022-3115(89)90560-6. [76] H. Pfeiffer and K. M. Knowles, \"Reaction mechanisms and kinetics of the synthesis and decomposition of lithium metazirconate through solid-state reaction,\" Journal of the European Ceramic Society, vol. 24, no. 8, pp. 2433-2443, Jul 2004, doi: 10.1016/s0955-2219(03)00630-7. [77] J. L. Hodeau, M. Marezio, A. Santoro, and R. S. Roth, \"NEUTRON PROFILE REFINEMENT OF THE STRUCTURES OF Li2SnO3 AND Li2ZrO3,\" Journal of Solid State Chemistry, vol. 45, no. 2, pp. 170-179, 1982, doi: 10.1016/0022-4596(82)90273-0. [78] N. Roux, J. Avon, A. Floreancig, J. Mougin, B. Rasneur, and S. Ravel, \"Low-temperature tritium releasing ceramics as potential materials for the ITER breeding blanket,\" Journal of Nuclear Materials, vol. 233, pp. 1431-1435, Oct 1996, doi: 10.1016/s0022-3115(96)00136-5. [79] A. R. West, \"Solid state chemistry and its applications 2014,\" John Wiley & Sons pp. 187-197. [80] H. L. Xu et al., \"Effect of the Particle Size of Quartz Powder on the Synthesis and CO2 Absorption Properties of Li4SiO4 at High Temperature,\" Industrial & Engineering Chemistry Research, vol. 52, no. 5, pp. 1886-1891, Feb 2013, doi: 10.1021/ie301178p. [81] M. Q. Xiang, Y. C. Zhang, Y. Zhang, S. Y. Liu, H. Liu, and C. F. Wang, \"Fabrication and Characterization of Li2TiO3-Li4SiO4 Pebbles for Tritium Breeder,\" Journal of Fusion Energy, vol. 34, no. 6, pp. 1341-1347, Dec 2015, doi: 10.1007/s10894-015-9967-7. [82] D. Mandal, D. Sathiyamoorthy, and V. G. Rao, \"Preparation and characterization of lithium-titanate pebbles by solid-state reaction extrusion and spherodization techniques for fusion reactor,\" Fusion Engineering and Design, vol. 87, no. 1, pp. 7-12, Jan 2012, doi: 10.1016/j.fusengdes.2011.08.006. [83] R. Padhy, A. N. Rao, S. K. S. Parashar, K. Parashar, and P. Chaudhuri, \"Sintering effect on electrical properties of Li2TiO3,\" Solid State Ionics, vol. 256, pp. 29-37, Mar 2014, doi: 10.1016/j.ssi.2013.12.031. [84] S. Sonak, U. Jain, A. K. Sahu, S. Kumar, and N. Krishnamurthy, \"Thermogravimetric analysis and kinetic study of formation of lithium titanate by solid state route,\" Journal of Nuclear Materials, vol. 457, pp. 88-93, Feb 2015, doi: 10.1016/j.jnucmat.2014.11.016. [85] A. V. Zhukov, S. V. Chizhevskaya, and A. O. Merkushkin, \"Solid-Phase Synthesis of Li2TiO3,\" Glass and Ceramics, vol. 72, no. 9-10, pp. 327-330, Jan 2016, doi: 10.1007/s10717-016-9784-0. [86] T. Tang, Z. Zhang, J. B. Meng, and D. L. Luo, \"Synthesis and characterization of lithium silicate powders,\" Fusion Engineering and Design, vol. 84, no. 12, pp. 2124-2130, Dec 2009, doi: 10.1016/j.fusengdes.2009.02.017. [87] J. M. Miller, H. B. Hamilton, and J. D. Sullivan, \"TESTING OF LITHIUM TITANATE AS AN ALTERNATE BLANKET MATERIAL,\" Journal of Nuclear Materials, vol. 212, pp. 877-880, Sep 1994, doi: 10.1016/0022-3115(94)90961-x. 177 [88] L. DeJonghe and M. Rahaman, \"Handbook of Advanced Ceramics,\" Elsevier Inc., Marquis one, Atlanta. pp. 187-188., 2003. [89] H. Kimura, M. Asano, and K. Kubo, \"THERMOCHEMICAL STUDY OF THE VAPORIZATION OF LI2O(c) BY MASS-SPECTROMETRIC KNUDSEN EFFUSION METHOD,\" Journal of Nuclear Materials, vol. 92, no. 2-3, pp. 221-228, 1980, doi: 10.1016/0022-3115(80)90106-3. [90] Y. Ikeda, H. Ito, G. Matsumoto, and H. Hayashi, \"THE VAPORIZATION AND THERMOCHEMICAL STABILITY OF LITHIUM ALUMINATES,\" Journal of Nuclear Materials, vol. 97, no. 1-2, pp. 47-58, 1981, doi: 10.1016/0022-3115(81)90417-7. [91] H. Pfeiffer and P. Bosch, \"Thermal stability and high-temperature carbon dioxide sorption on hexa-lithium zirconate (Li6Zr2O7),\" Chemistry of Materials, vol. 17, no. 7, pp. 1704-1710, Apr 2005, doi: 10.1021/cm047897+. [92] H. Nakagawa, M. Asano, and K. Kubo, \"MASS-SPECTROMETRIC INVESTIGATION OF THE VAPORIZATION OF Li2TiO3(s),\" Journal of Nuclear Materials, vol. 110, no. 2-3, pp. 158-163, 1982, doi: 10.1016/0022-3115(82)90141-6. [93] D. Cruz, S. Bulbulian, E. Lima, and H. Pfeiffer, \"Kinetic analysis of the thermal stability of lithium silicates (Li4SiO4 and Li2SiO3),\" Journal of Solid State Chemistry, vol. 179, no. 3, pp. 909-916, Mar 2006, doi: 10.1016/j.jssc.2005.12.020. [94] S. Saito, K. Tsuchiya, H. Kawamura, T. Terai, and S. Tanaka, \"Density dependence on thermal properties of Li2TiO3 pellets,\" Journal of Nuclear Materials, vol. 253, pp. 213-218, Mar 1998, doi: 10.1016/s0022-3115(97)00314-0. [95] M. Xiang, Y. Zhang, Y. Zhang, C. Wang, W. Liu, and Y. Yu, \"Effects of grain size and porosity on strength of Li2TiO3 tritium breeding pebbles and its grain growth behavior,\" Journal of Nuclear Materials, vol. 482, pp. 163-169, 2016/12/15/ 2016, doi: https://doi.org/10.1016/j.jnucmat.2016.10.027. [96] A. E. Danks, S. R. Hall, and Z. Schnepp, \"The evolution of 'sol-gel' chemistry as a technique for materials synthesis,\" Materials Horizons, vol. 3, no. 2, pp. 91-112, Mar 2016, doi: 10.1039/c5mh00260e. [97] L. C. Klein, \"SOL-GEL PROCESSING OF IONIC CONDUCTORS,\" Solid State Ionics, vol. 32-3, pp. 639-645, Feb-Mar 1989, doi: 10.1016/0167-2738(89)90339-1. [98] O. Renoult, J. P. Boilot, J. P. Korb, and M. Boncoeur, \"LITHIUM SOL-GEL CERAMICS FOR TRITIUM BREEDING APPLICATION,\" Journal of Nuclear Materials, vol. 223, no. 2, pp. 126-134, May 1995, doi: 10.1016/0022-3115(95)00018-6. [99] X. H. Yu et al., \"Fabrication of Li4SiO4 pebbles by wet method with modified powders synthesized via sol-gel process,\" Journal of Nuclear Materials, vol. 456, pp. 455-460, Jan 2015, doi: 10.1016/j.jnucmat.2014.10.030. [100] X. W. Wu, Z. Y. Wen, X. G. Xu, J. D. Han, and B. Lin, \"Fabrication and improvement of the density of Li2TiO3 pebbles by the optimization of a sol-gel method,\" Journal of Nuclear Materials, vol. 393, no. 1, pp. 186-191, Aug 2009, doi: 10.1016/j.jnucmat.2009.06.002. [101] M. H. H. Kolb, R. Knitter, U. Kaufmann, and D. Mundt, \"Enhanced fabrication process for lithium orthosilicate pebbles as breeding material,\" Fusion Engineering and Design, vol. 86, no. 9-11, pp. 2148-2151, Oct 2011, doi: 10.1016/j.fusengdes.2011.01.104. [102] J. F. Ziegler, \"The electronic and nuclear stopping of energetic ions,\" Applied Physics Letters, vol. 31, no. 8, pp. 544-546, 1977/10/15 1977, doi: 10.1063/1.89771. [103] G. H. Kinchin and R. S. Pease, \"The Displacement of Atoms in Solids by Radiation,\" Reports on Progress in Physics, vol. 18, no. 1, pp. 1-51, 1955/01/01 1955, doi: 10.1088/0034-4885/18/1/301. [104] L. W. Hobbs, \"Radiation Effects in Analysis of Inorganic Specimens by TEM,\" in Introduction to Analytical Electron Microscopy, J. J. Hren Ed. New York: Springer Science+Business Media, 1979, p. 437. [105] C. E. Johnson, \"CERAMIC BREEDER MATERIALS,\" Ceramics International, vol. 17, no. 4, pp. 253-258, 1991, doi: 10.1016/0272-8842(91)90019-v. [106] U. Jain and A. B. Lidiard, \"GROWTH OF COLLOIDAL CENTERS IN IRRADIATED ALKALI-HALIDES,\" Philosophical Magazine, vol. 35, no. 1, pp. 245-259, 1977, doi: 10.1080/14786437708235986. 178 [107] Y. Ekmanis, \"RADIOLYSIS BEHAVIOR IN ALKALI-HALIDE CRYSTALS,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 1, no. 2-3, pp. 473-474, 1984, doi: 10.1016/0168-583x(84)90111-3. [108] V. I. Dubinko, A. A. Turkin, D. I. Vainshtein, and H. W. den Hartog, \"A new mechanism for radiation damage processes in alkali halides,\" Journal of Applied Physics, vol. 86, no. 11, pp. 5957-5960, Dec 1999, doi: 10.1063/1.371639. [109] E. Johnson and L. T. Chadderton, \"The void superlattice in fluorite,\" Micron, vol. 11, no. 3-4, pp. 247-250, 1980. [110] P. J. Call, W. Hayes, J. P. Stott, and A. E. Hughes, \"Radiolysis of alkaline-earth fluorides,\" Journal of Physics C: Solid State Physics, vol. 7, no. 14, pp. 2417-2428, 1974/07/21 1974, doi: 10.1088/0022-3719/7/14/006. [111] L. W. Hobbs and M. R. Pascucci, \"Radiolysis and defect structure in electron-irradiated α-quartz,\" Le Journal de Physique Colloques, vol. 41, no. C6, pp. C6-237, 1980. [112] J. F. Denatale and D. G. Howitt, \"A mechanism for radiation damage in silicate glasses,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 1, no. 2, pp. 489-497, 1984/02/01/ 1984, doi: https://doi.org/10.1016/0168-583X(84)90114-9. [113] L. W. Hobbs, \"ELECTRON-BEAM SENSITIVITY IN INORGANIC SPECIMENS,\" Ultramicroscopy, vol. 23, no. 3-4, pp. 339-344, 1987, doi: 10.1016/0304-3991(87)90244-0. [114] M. L. Knotek and P. J. Feibelman, \"STABILITY OF IONICALLY BONDED SURFACES IN IONIZING ENVIRONMENTS,\" Surface Science, vol. 90, no. 1, pp. 78-90, 1979, doi: 10.1016/0039-6028(79)90011-6. [115] R. A. Verrall, J. M. Miller, and P. Gierszewski, \"Performance of a Li2TiO3 pebble-bed in the CRITIC-III irradiation,\" Journal of Nuclear Materials, vol. 281, no. 1, pp. 71-79, Sep 2000, doi: 10.1016/s0022-3115(00)00057-x. [116] G. Piazza, F. Scaffidi-Argentina, and H. Werle, \"Post-irradiation examinations of Li4SiO4 pebbles irradiated in the EXOTIC-7 experiment,\" Journal of Nuclear Materials, vol. 283, pp. 1396-1400, Dec 2000, doi: 10.1016/s0022-3115(00)00300-7. [117] G. Piazza, A. Erbe, R. Rolli, and O. Romer, \"Post-irradiation examinations of Li4SiO4 pebbles irradiated in the EXOTIC-8 experiment,\" Journal of Nuclear Materials, vol. 329, pp. 1260-1265, Aug 2004, doi: 10.1016/j.jnucmat.2004.04.235. [118] M. Oyaidzu et al., \"ESR study on annihilation process of radiation defects induced in solid tritium breeding materials by neutron irradiation,\" Physica Scripta, vol. T108, pp. 42-45, 2004. [119] G. M. Ran et al., \"Annihilation behavior of irradiation defects in Li4SiO4 irradiated with high thermal neutron fluence,\" Journal of Nuclear Materials, vol. 491, pp. 43-47, Aug 2017, doi: 10.1016/j.jnucmat.2017.04.055. [120] Q. L. Zhou et al., \"Release kinetics of tritium generation in neutron irradiated biphasic Li2TiO3-Li4SiO4 ceramic breeder,\" Journal of Nuclear Materials, vol. 522, pp. 286-293, Aug 2019, doi: 10.1016/j.jnucmat.2019.05.033. [121] M. H. H. Kolb, J. M. Heuser, R. Rolli, H. C. Schneider, R. Knitter, and M. Zmitko, \"The HICU PIE results of EU ceramic breeder pebbles: General characterization,\" Journal of Nuclear Materials, vol. 531, Apr 2020, Art no. 152023, doi: 10.1016/j.jnucmat.2020.152023. [122] T. Nakazawa et al., \"High energy heavy ion induced structural disorder in Li2TiO3,\" Journal of Nuclear Materials, vol. 367-370, pp. 1398-1403, 2007/08/01/ 2007, doi: https://doi.org/10.1016/j.jnucmat.2007.04.003. [123] M. A. van Huis et al., \"Formation, growth and dissociation of He bubbles in Al2O3,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 216, pp. 149-155, Feb 2004, doi: 10.1016/j.nimb.2003.11.071. [124] J. Wang et al., \"Release behavior of hydrogen isotopes in deuterium-irradiated Li2TiO3,\" Fusion Engineering and Design, vol. 113, pp. 318-323, Dec 2016, doi: 10.1016/j.fusengdes.2016.05.022. 179 [125] E. Carella, M. Gonzalez, and R. Gonzalez-Arrabal, \"D-depth profiling in as-implanted and annealed Li-based breeder blanket ceramics,\" Journal of Nuclear Materials, vol. 438, no. 1-3, pp. 193-198, Jul 2013, doi: 10.1016/j.jnucmat.2013.02.073. [126] M. Kobayashi, Y. Oya, and K. Okuno, \"Migration of hydrogen isotopes in lithium metatitanate,\" Journal of Nuclear Materials, vol. 439, no. 1-3, pp. 159-167, Aug 2013, doi: 10.1016/j.jnucmat.2013.04.020. [127] C. A. Taylor et al., \"Combined effects of radiation damage and He accumulation on bubble nucleation in Gd2Ti2O7,\" Journal of Nuclear Materials, vol. 479, pp. 542-547, Oct 2016, doi: 10.1016/j.jnucmat.2016.07.043. [128] G. Greaves, A. H. Mir, R. W. Harrison, M. A. Tunes, S. E. Donnelly, and J. A. Hinks, \"New Microscope and Ion Accelerators for Materials Investigations (MIAMI-2) system at the University of Huddersfield,\" Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 931, pp. 37-43, 2019/07/01/ 2019, doi: https://doi.org/10.1016/j.nima.2019.03.074. [129] K. Ono, M. Miyamoto, H. Kurata, M. Haruta, and A. Yatomi, \"Dynamic behavior of helium bubbles at high temperature in Si studied by in situ TEM, STEM-EELS, and TDS,\" Journal of Applied Physics, vol. 126, no. 13, Oct 2019, Art no. 135104, doi: 10.1063/1.5118684. [130] S. M. González de Vicente, J.-L. Boutard, S.J. Zinkle and H. Tanigawa, \"Materials testing facilities and programmes for fission and ion implantation damage,\" Nuclear Fusion, vol. 57, no. 9, p. 092011, 2017. [131] S. J. Zinkle and L. L. Snead, \"Opportunities and limitations for ion beams in radiation effects studies: Bridging critical gaps between charged particle and neutron irradiations,\" Scripta Materialia, vol. 143, pp. 154-160, Jan 2018, doi: 10.1016/j.scriptamat.2017.06.041. [132] J. F. Ziegler, M. D. Ziegler, and J. P. Biersack, \"SRIM – The stopping and range of ions in matter (2010),\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 268, no. 11, pp. 1818-1823, 2010/06/01/ 2010, doi: https://doi.org/10.1016/j.nimb.2010.02.091. [133] Y. Li et al., \"In-situ TEM investigation of 30 keV He+ irradiated tungsten: Effects of temperature, fluence, and sample thickness on dislocation loop evolution,\" Acta Materialia, vol. 206, p. 116618, 2021/03/01/ 2021, doi: https://doi.org/10.1016/j.actamat.2020.116618. [134] L. F. He et al., \"In situ TEM observation of dislocation evolution in Kr-irradiated UO2 single crystal,\" Journal of Nuclear Materials, vol. 443, no. 1, pp. 71-77, 2013/11/01/ 2013, doi: https://doi.org/10.1016/j.jnucmat.2013.06.050. [135] M. P. Short, D. R. Gaston, M. Jin, L. Shao, and F. A. Garner, \"Modeling injected interstitial effects on void swelling in self-ion irradiation experiments,\" Journal of Nuclear Materials, vol. 471, pp. 200-207, 2016/04/01/ 2016, doi: https://doi.org/10.1016/j.jnucmat.2015.10.002. [136] W. Xu et al., \"In-situ atomic-scale observation of irradiation-induced void formation,\" Nature Communications, vol. 4, no. 1, p. 2288, 2013/08/05 2013, doi: 10.1038/ncomms3288. [137] L. W. Hobbs, \"Transmission electron microscopy of defects in alkali halides,\" Le Journal de Physique Colloques, vol. 34, no. C9, pp. C9-227, 1973. [138] T. Koyanagi et al., \"Microstructural evolution of pure tungsten neutron irradiated with a mixed energy spectrum,\" Journal of Nuclear Materials, vol. 490, pp. 66-74, Jul 2017, doi: 10.1016/j.jnucmat.2017.04.010. [139] H. Trinkaus and B. N. Singh, \"Modeling of void nucleation under cascade damage conditions,\" Journal of Nuclear Materials, vol. 307, pp. 900-906, Dec 2002, Art no. Pii s0022-3115(02)01120-0, doi: 10.1016/s0022-3115(02)01120-0. [140] S. Jublot-Leclerc, X. Li, L. Legras, F. Fortuna, and A. Gentils, \"Cavity nucleation and growth in dual beam irradiated 316L industrial austenitic stainless steel,\" Journal of Nuclear Materials, vol. 494, pp. 240-251, Oct 2017, doi: 10.1016/j.jnucmat.2017.07.038. [141] V. Gavini, K. Bhattacharya, and M. Ortiz, \"Vacancy clustering and prismatic dislocation loop formation in aluminum,\" Physical Review B, vol. 76, no. 18, Nov 2007, Art no. 180101, doi: 10.1103/PhysRevB.76.180101. 180 [142] F. Gao, D. J. Bacon, L. M. Howe, and C. B. So, \"Temperature-dependence of defect creation and clustering by displacement cascades in alpha-zirconium,\" Journal of Nuclear Materials, vol. 294, no. 3, pp. 288-298, Apr 2001, doi: 10.1016/s0022-3115(01)00483-4. [143] C. C. Matthai and D. J. Bacon, \"THE COLLAPSE OF VACANCY CLUSTERS - A MOLECULAR-DYNAMICS STUDY,\" Journal of Nuclear Materials, vol. 135, no. 2-3, pp. 173-180, 1985, doi: 10.1016/0022-3115(85)90075-3. [144] S. J. Zinkle, L. E. Seitzman, and W. G. Wolfer, \"STABILITY OF VACANCY CLUSTERS IN METALS .1. ENERGY CALCULATIONS FOR PURE METALS,\" Philosophical Magazine a-Physics of Condensed Matter Structure Defects and Mechanical Properties, vol. 55, no. 1, pp. 111-125, Jan 1987, doi: 10.1080/01418618708209803. [145] S. J. Zinkle and E. H. Lee, \"EFFECT OF OXYGEN ON VACANCY CLUSTER MORPHOLOGY IN METALS,\" Metallurgical Transactions a-Physical Metallurgy and Materials Science, vol. 21, no. 5, pp. 1037-1051, May 1990, doi: 10.1007/bf02656525. [146] R. M. Mayer, \"NUCLEATION AND GROWTH OF VOIDS BY RADIATION .5. ROLE OF GAS,\" Journal of Nuclear Materials, vol. 95, no. 1-2, pp. 83-91, 1980, doi: 10.1016/0022-3115(80)90083-5. [147] P. J. Goodhew, \"Inert gas bubbles,\" Materials Science and Technology, vol. 6, no. 10, pp. 950-952, 1990/10/01 1990, doi: 10.1179/026708390790189597. [148] D. E. Rimmer and A. H. Cottrell, \"The solution of inert gas atoms in metals,\" The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, vol. 2, no. 23, pp. 1345-1353, 1957/11/01 1957, doi: 10.1080/14786435708243211. [149] B. Kaiser et al., \"TEM study and modeling of bubble formation in dual-beam He+/Fe3+ ion irradiated EUROFER 97,\" Journal of Nuclear Materials, vol. 484, pp. 59-67, Feb 2017, doi: 10.1016/j.jnucmat.2016.11.014. [150] T. F. Yang et al., \"Effects of He Irradiation on Yttria-Stabilized Zirconia Ceramics,\" Journal of the American Ceramic Society, vol. 98, no. 4, pp. 1314-1322, Apr 2015, doi: 10.1111/jace.13423. [151] C. A. Taylor et al., \"Bubble formation and lattice parameter changes resulting from He irradiation of defect-fluorite Gd2Zr2O7,\" Acta Materialia, vol. 115, pp. 115-122, Aug 2016, doi: 10.1016/j.actamat.2016.05.045. [152] G. Gutierrez et al., \"Helium bubble formation in nuclear glass by in-situ TEM ion implantation,\" Journal of Nuclear Materials, vol. 452, no. 1-3, pp. 565-568, Sep 2014, doi: 10.1016/j.jnucmat.2014.06.010. [153] P. J. Goodhew, \"CAVITY GROWTH-MECHANISM MAPS,\" Scripta Metallurgica, vol. 18, no. 10, pp. 1069-1073, 1984, doi: 10.1016/0036-9748(84)90180-7. [154] S. K. Tyler and P. J. Goodhew, \"Direct evidence for the Brownian motion of helium bubbles,\" Journal of Nuclear Materials, vol. 92, no. 2, pp. 201-206, 1980/09/01/ 1980, doi: https://doi.org/10.1016/0022-3115(80)90103-8. [155] G. S. Was, Fundamentals of Radiation Materials Science. Metals and Alloys, 1st ed. Springer-Verlag Berlin Heidelberg, 2007. [156] H. Trinkaus and B. N. Singh, \"Helium accumulation in metals during irradiation – where do we stand?,\" Journal of Nuclear Materials, vol. 323, no. 2, pp. 229-242, 2003/12/01/ 2003, doi: https://doi.org/10.1016/j.jnucmat.2003.09.001. [157] S. J. Zinkle and C. Kinoshita, \"Defect production in ceramics,\" Journal of Nuclear Materials, vol. 251, pp. 200-217, 1997/11/11/ 1997, doi: https://doi.org/10.1016/S0022-3115(97)00224-9. [158] H. Schroeder and P. F. P. Fichtner, \"ON THE COARSENING MECHANISMS OF HELIUM BUBBLES - OSTWALD RIPENING VERSUS MIGRATION AND COALESCENCE,\" Journal of Nuclear Materials, vol. 179, pp. 1007-1010, Mar-Apr 1991, doi: 10.1016/0022-3115(91)90261-5. [159] J. H. Evans, \"Mechanisms of void coarsening in helium implanted silicon,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 196, no. 1-2, pp. 125-134, Nov 2002, Art no. Pii s0168-583x(02)01290-9, doi: 10.1016/s0168-583x(02)01290-9. [160] S. Furuno et al., \"Ion irradiation and annealing effects in Al2O3 and MgAl2O4,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 127-128, pp. 181-185, 1997/05/02/ 1997, doi: https://doi.org/10.1016/S0168-583X(97)00066-9. 181 [161] A. Ofan et al., \"Spherical solid He nanometer bubbles in an anisotropic complex oxide,\" Physical Review B, vol. 82, no. 10, Sep 2010, Art no. 104113, doi: 10.1103/PhysRevB.82.104113. [162] C. A. Taylor, J. D. Sugar, D. B. Robinson, N. C. Bartelt, R. B. Sills, and K. Hattar, \"Using In Situ TEM Helium Implantation and Annealing to Study Cavity Nucleation and Growth,\" Jom, vol. 72, no. 5, pp. 2032-2041, May 2020, doi: 10.1007/s11837-020-04117-4. [163] V. N. Chernikov, H. Trinkaus, P. Jung, and H. Ullmaier, \"THE FORMATION OF HELIUM BUBBLES NEAR THE SURFACE AND IN THE BULK IN NICKEL DURING POST-IMPLANTATION ANNEALING,\" Journal of Nuclear Materials, vol. 170, no. 1, pp. 31-38, Jan 1990, doi: 10.1016/0022-3115(90)90323-f. [164] J. Strane, L. D. Marks, D. E. Luzzi, M. I. Buckett, J. P. Zhang, and B. W. Wessels, \"ENCAPSULATION, DIFFUSION AND DIET IN THE ELECTRON-MICROSCOPE,\" Ultramicroscopy, vol. 25, no. 3, pp. 253-257, 1988, doi: 10.1016/0304-3991(88)90019-8. [165] M. R. McCartney and D. J. Smith, \"STUDIES OF ELECTRON-IRRADIATION AND ANNEALING EFFECTS ON TIO2 SURFACES IN ULTRAHIGH-VACUUM USING HIGH-RESOLUTION ELECTRON-MICROSCOPY,\" Surface Science, vol. 250, no. 1-3, pp. 169-178, Jul 1991, doi: 10.1016/0039-6028(91)90719-9. [166] W. B. Liu et al., \"Irradiation Induced Microstructure Evolution in Nanostructured Materials: A Review,\" Materials, vol. 9, no. 2, Feb 2016, Art no. 105, doi: 10.3390/ma9020105. [167] F. Y. Lu et al., \"Amorphization of nanocrystalline monoclinic ZrO2 by swift heavy ion irradiation,\" Physical Chemistry Chemical Physics, vol. 14, no. 35, pp. 12295-12300, 2012, doi: 10.1039/c2cp41553d. [168] B. Schuster, M. Lang, R. Klein, C. Trautmann, R. Neumann, and A. Benyagoub, \"Structural phase transition in ZrO2 induced by swift heavy ion irradiation at high-pressure,\" Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 267, no. 6, pp. 964-968, Mar 2009, doi: 10.1016/j.nimb.2009.02.046. [169] W. J. Qin et al., \"Different Radiation Tolerances of Ultrafine-Grained Zirconia-Magnesia Composite Ceramics with Different Grain Sizes,\" Materials, vol. 12, no. 17, Sep 2019, Art no. 2649, doi: 10.3390/ma12172649. [170] T. Nakazawa, V. Grismanovs, D. Yamaki, Y. Katano, and T. Aruga, \"Disordering in Li2TiO3 irradiated with high energy ions,\" Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 206, pp. 166-170, 2003/05/01/ 2003, doi: https://doi.org/10.1016/S0168-583X(03)00712-2. [171] Q. L. Zhou, Y. Oya, T. Chikada, W. Zhang, L. H. Xue, and Y. W. Yan, \"Preparation of Li2TiO3 by hydrothermal synthesis and its structure evolution under high energy Ar+ irradiation,\" Journal of the European Ceramic Society, vol. 37, no. 15, pp. 4955-4961, Dec 2017, doi: 10.1016/j.jeurceramsoc.2017.06.032. [172] N. M. Masaki, K. Noda, H. Watanabe, R. G. Clemmer, and G. W. Hollenberg, \"SPECTROSCOPIC STUDY OF LITHIUM-OXIDE IRRADIATED BY FAST-NEUTRONS,\" Journal of Nuclear Materials, vol. 212, pp. 908-911, Sep 1994, doi: 10.1016/0022-3115(94)90967-9. [173] J. Tiliks, G. Kizane, A. Vitins, G. Vitins, and J. Meisters, \"Physicochemical processes in blanket ceramic materials,\" Fusion Engineering and Design, vol. 69, no. 1-4, pp. 519-522, Sep 2003, doi: 10.1016/s0920-3796(03)00120-0. [174] A. Zarins, A. Supe, G. Kizane, R. Knitter, and L. Baumane, \"Accumulation of radiation defects and products of radiolysis in lithium orthosilicate pebbles with silicon dioxide additions under action of high absorbed doses and high temperature in air and inert atmosphere,\" Journal of Nuclear Materials, vol. 429, no. 1-3, pp. 34-39, Oct 2012, doi: 10.1016/j.jnucmat.2012.05.028. [175] R. A. Verrall, D. H. Rose, J. M. Miller, I. J. Hastings, and D. S. Macdonald, \"BUBBLE FORMATION IN IRRADIATED LI2O,\" Journal of Nuclear Materials, vol. 179, pp. 855-858, Mar-Apr 1991, doi: 10.1016/0022-3115(91)90223-t. [176] G. Hollenberg and D. Baldwin, \"The effect of irradiation on four solid breeder materials,\" Journal of nuclear materials, vol. 133, pp. 242-245, 1985. [177] E. Carella, T. Sauvage, R. Bes, B. Courtois, and M. Gonzalez, \"Nuclear reaction analysis as a tool for the 3He thermal evolution in Li2TiO3 ceramics,\" Nuclear Instruments & Methods in Physics Research Section 182 B-Beam Interactions with Materials and Atoms, vol. 332, pp. 85-89, Aug 2014, doi: 10.1016/j.nimb.2014.02.035. [178] L. J. Zhao et al., \"Tritium release in Li4SiO4 and Li4.2Si0.8Al0.2O4 ceramics,\" Journal of Nuclear Materials, vol. 482, pp. 42-46, Dec 2016, doi: 10.1016/j.jnucmat.2016.10.009. [179] C. E. Johnson, \"Tritium behavior in lithium ceramics,\" Journal of Nuclear Materials, vol. 270, no. 1-2, pp. 212-220, Apr 1999, doi: 10.1016/s0022-3115(98)00905-2. [180] N. Roux, G. Hollenberg, C. Johnson, K. Noda, and R. Verrall, \"SUMMARY OF EXPERIMENTAL RESULTS FOR CERAMIC BREEDER MATERIALS,\" Fusion Engineering and Design, vol. 27, pp. 154-166, Mar 1995, doi: 10.1016/0920-3796(95)90123-x. [181] R. E. Avila, L. A. Pena, and J. C. Jimenez, \"Surface desorption and bulk diffusion models of tritium release from Li2TiO3 and Li2ZrO3 pebbles,\" Journal of Nuclear Materials, vol. 405, no. 3, pp. 244-251, Oct 2010, doi: 10.1016/j.jnucmat.2010.08.009. [182] J. G. van der Laan, H. Kawamura, N. Roux, and D. Yamaki, \"Ceramic breeder research and development: progress and focus,\" Journal of Nuclear Materials, vol. 283, pp. 99-109, Dec 2000, doi: 10.1016/s0022-3115(00)00352-4. [183] H. Wedemeyer, H. Werle, and E. Gunther, \"INFLUENCE OF GRAIN-SIZE AND CARBONATE IMPURITIES ON THE TRITIUM RELEASE FROM LITHIUM ORTHOSILICATE,\" Journal of Nuclear Materials, vol. 191, pp. 240-242, Sep 1992. [184] M. M. W. Peeters, A. J. Magielsen, M. P. Stijkel, and J. G. van der Laan, \"In-pile tritium release behaviour of lithium metatitanate produced by extrusion-spheroidisation-sintering process in EXOTIC-9/1 in the high flux reactor, Petten,\" Fusion Engineering and Design, vol. 82, no. 15-24, pp. 2318-2325, Oct 2007, doi: 10.1016/j.fusengdes.2007.05.036. [185] J. M. Heuser, M. H. H. Kolb, R. Rolli, H. C. Schneider, R. Knitter, and M. Zmitko, \"The HICU PIE results of EU ceramic breeder pebbles: Tritium release properties,\" Journal of Nuclear Materials, vol. 531, Apr 2020, Art no. 152024, doi: 10.1016/j.jnucmat.2020.152024. [186] M. Kobayashi, K. Toda, Y. Oya, and K. Okuno, \"Dependency of irradiation damage density on tritium migration behaviors in Li2TiO3,\" Journal of Nuclear Materials, vol. 447, no. 1-3, pp. 1-8, Apr 2014, doi: 10.1016/j.jnucmat.2013.12.001. [187] J. K. Cockcroft, P. Barnes, M. Attfield, and H. Driessen, \"Powder Diffraction on the Web,\" http://pd.chem.ucl.ac.uk/, (c) 1997 - 2006. [188] C. A. Schneider, W. S. Rasband, and K. W. Eliceiri, \"NIH Image to ImageJ: 25 years of image analysis,\" Nature Methods, vol. 9, no. 7, pp. 671-675, 2012/07/01 2012, doi: 10.1038/nmeth.2089. [189] D. B. Williams and C. B. Carter, Transmission Electron Microscopy: A Textbook for Materials Science, Second Edition. New York: Springer Science+Business Media, 2009. [190] \"OriginPro, Version 2017 . OriginLab Corporation, Northampton, MA, USA.,\" [191] A. Baron-Wiechec et al., \"Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak,\" Fusion Engineering and Design, vol. 133, pp. 135-141, 2018/08/01/ 2018, doi: https://doi.org/10.1016/j.fusengdes.2018.05.075. [192] R. Smith, \"MRF Tritium Capability,\" (Presentation slides, July 2015) Personal communication. [193] \"ASTM E112-10, Standard Test Methods for Determining Average Grain Size,\" PA: ASTM International, West Conshohocken, 2010. [194] M. I. Mendelson, \"AVERAGE GRAIN SIZE IN POLYCRYSTALLINE CERAMICS,\" Journal of the American Ceramic Society, vol. 52, no. 8, pp. 443-+, 1969, doi: 10.1111/j.1151-2916.1969.tb11975.x. [195] A. R. C. Gerlt, A. K. Criner, L. Semiatin, and E. J. Payton, \"On the grain size proportionality constants calculated in MI Mendelson's \"Average Grain Size in Polycrystalline Ceramics\",\" Journal of the American Ceramic Society, vol. 102, no. 1, pp. 37-41, Jan 2019, doi: 10.1111/jace.15950. [196] J. C. Wurst and J. A. Nelson, \"LINEAR INTERCEPT TECHNIQUE FOR MEASURING GRAIN-SIZE IN 2-PHASE POLYCRYSTALLINE CERAMICS,\" Journal of the American Ceramic Society, vol. 55, no. 2, pp. 109-&, 1972, doi: 10.1111/j.1151-2916.1972.tb11224.x. [197] R. Knitter, B. Alm, and G. Roth, \"Crystallisation and microstructure of lithium orthosilicate pebbles,\" Journal of Nuclear Materials, vol. 367, pp. 1387-1392, Aug 2007, doi: 10.1016/j.jnucmat.2007.04.002. 183 [198] I. M. Lifshitz and V. V. Slyozov, \"The kinetics of precipitation from supersaturated solid solutions,\" Journal of Physics and Chemistry of Solids, vol. 19, no. 1, pp. 35-50, 1961/04/01/ 1961, doi: https://doi.org/10.1016/0022-3697(61)90054-3. [199] C. Wagner, \"THEORIE DER ALTERUNG VON NIEDERSCHLAGEN DURCH UMLOSEN (OSTWALD-REIFUNG),\" Zeitschrift Fur Elektrochemie, vol. 65, no. 7-8, pp. 581-591, 1961. [200] E. Snoeck, J. Majimel, M. O. Ruault, and M. J. Hytch, \"Characterization of helium bubble size and faceting by electron holography,\" Journal of Applied Physics, vol. 100, no. 2, Jul 2006, Art no. 023519, doi: 10.1063/1.2216791. [201] S. T. Murphy and N. D. M. Hine, \"Point Defects and Non-stoichiometry in Li2TiO3,\" Chemistry of Materials, vol. 26, no. 4, pp. 1629-1638, 2014/02/25 2014, doi: 10.1021/cm4038473. [202] A. I. Van Sambeek, R. S. Averback, C. P. Flynn, and M. H. Yang, \"Radiation enhanced diffusion in MgO,\" in Symposium on Microstructure of Irradiated Materials, at the 1994 MRS Fall Meeting, Boston, Ma, Nov 29-Dec 01 1994, vol. 373, in Materials Research Society Symposium Proceedings, 1995, pp. 293-298. [Online]. Available: <Go to ISI>://WOS:A1995BD31C00043 [203] J. C. Bourgoin, J. W. Corbett, and H. L. Frisch, \"IONIZATION ENHANCED DIFFUSION,\" Journal of Chemical Physics, vol. 59, no. 8, pp. 4042-4046, 1973, doi: 10.1063/1.1680596. [204] C. Fan et al., \"Irradiation induced void spheroidization, shrinkage and migration in Cu at elevated temperatures: An in situ study,\" Acta Materialia, vol. 201, pp. 504-516, 2020/12/01/ 2020, doi: https://doi.org/10.1016/j.actamat.2020.10.008. [205] Y. Furuyama, K. Yahata, R. Nakamori, A. Taniike, H. Samata, and A. Kitamura, \"CO2 absorption characteristics of a Li2TiO3 blanket material under atmospheric exposure,\" Journal of Nuclear Materials, vol. 455, no. 1, pp. 527-530, 2014/12/01/ 2014, doi: https://doi.org/10.1016/j.jnucmat.2014.08.007. [206] U. Fischer et al., \"Comparison of nuclear irradiation parameters of fusion breeder materials in high flux fission test reactors and a fusion power demonstration reactor,\" Journal of Nuclear Materials, vol. 280, no. 2, pp. 151-161, 2000/07/01/ 2000, doi: https://doi.org/10.1016/S0022-3115(00)00049-0. [207] J. Shimwell et al., \"Spatially and temporally varying tritium generation in solid-type breeder blankets,\" Fusion Engineering and Design, vol. 98-99, pp. 1868-1871, Oct 2015, doi: 10.1016/j.fusengdes.2015.04.018. [208] Z. Shen, M. Johnsson, Z. Zhao, and M. Nygren, \"Spark Plasma Sintering of Alumina,\" Journal of the American Ceramic Society, https://doi.org/10.1111/j.1151-2916.2002.tb00381.x vol. 85, no. 8, pp. 1921-1927, 2002/08/01 2002, doi: https://doi.org/10.1111/j.1151-2916.2002.tb00381.x. [209] A. Hollingsworth et al., \"Comparative study of deuterium retention in irradiated Eurofer and Fe-Cr from a new ion implantation materials facility,\""],"dcterms:accessrights":["public"],"dc:title":["Electron Beam Induced Damage and Helium Accumulation in Lithium Metatitanate Ceramic Breeder Materials"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["doctoral"],"dc:type.qualificationname":["Ph.D"],"person:identifier.orcid":["0000000222398625"]},"updated_at":"2026-11-18T23:19:45Z"}