• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 445
  • 264
  • 67
  • 35
  • 23
  • 14
  • 12
  • 8
  • 7
  • 7
  • 7
  • 7
  • 7
  • 7
  • 7
  • Tagged with
  • 1108
  • 196
  • 193
  • 106
  • 88
  • 76
  • 70
  • 57
  • 54
  • 52
  • 51
  • 48
  • 48
  • 47
  • 46
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
81

The stability of MG-chlorite

McPhail, Derry Campbell January 1985 (has links)
The equilibrium Chlorite = Cordierite + Forsterite + Spinel + H₂0 has been experimentally determined with a chlorite of composition Mg₄.₇₅Al₂.₅Si₂.₇₅O₁₀(OH)₈. Brackets have been obtained between 605 and 640° C at 0.5 kb, 644 and 670° C at 1.0 kb and 690 and 704° C at 2.0 kb. These data are not notably displaced from Chernosky's (1974) data for the same equilibrium with a chlorite of clinochlore composition (Mg₅Al₂Si₃O₁₀(OH)₈), however they are more constraining. A thermodynamic analysis of the above data and data on related equilibria included ideal solution models describing compositional variability in cordierite, orthopyroxene and chlorite. The H₂0 content of cordierite was described using a model based on that of Newton and Wood (1979). The hydrous end-member has two moles of H₂0 and the volumes of the end-members are different; this allows the full range of data to be described with one function. Al-content of orthopyroxene was calculated with Gasparik and Newton's (1984) model. Solid solution in chlorite was modelled by choosing the end-members, Mg₆Si₄O₁₀(OH)₈ and Mg₄Al₄Si₂O₁₀(OH)₈, and using ideal configurational entropy to describe the free energy of mixing. Disordering phenomena in cordierite and spinel were accounted for by adding small entropies of disorder to the third law entropies. Linear programming was used to calculate consistent thermochemical properties for all phases considered. Experimental results indicate that the upper thermal stability of Mg-chlorite is affected by only a few degrees for the composition used here. The thermochemical properties derived allow more complete modeling of systems that include chlorite. / Science, Faculty of / Earth, Ocean and Atmospheric Sciences, Department of / Graduate
82

Investigating collector and depressant performance in the flotation of selected iron ores

Mhonde, Ngoni Pepukai January 2016 (has links)
As the excessive extraction of high grade iron ore reserves has led to the rapid depletion of these ore bodies, there is a growing need to extract and upgrade low grade iron ores into more economically viable products with an iron content in excess of 50%. The beneficiation of low grade iron ores through the reverse cationic flotation procedure is gradually gaining popularity as a possible processing route of the future for South Africa's iron industry. Reverse cationic flotation employs a reagent suite consisting of an amine compound which functions as a quartz collector in addition to providing the frothing effect in the flotation system, and hydrolysed starch which serves to depress hematite during flotation. The aim of this project was to investigate the effect of using five amine collectors with different molecular structures on the flotation recovery of quartz and the entrainment of hematite in the flotation of a South African iron ore and a Brazilian iron ore. Laboratory batch flotation tests were conducted on both ore samples and the grade and recovery of hematite were recorded. The collectors were characterised through surface tension measurements and pKa value analysis. An attempt at using different polysaccharides as hematite depressants entailed the use of a CMC and a guar gum in batch flotation tests of the Brazilian iron ore.
83

Approximate solution of melt depth inside titanium during laser materials processing

Ngwenya, Dineo January 2015 (has links)
The use of lasers has increased in areas of science, engineering and medicine. Their advantages over the traditional methods of thermal application are their ability to localize thermal treatments, ability to deliver high power density and to complete thermal processes in extremely short time periods. During the irradiation of a material, only a portion of the laser beam energy is absorbed. If the absorbed energy is high enough, melting can occur. The ability to predict, thus control the melting process is an advantage to manufacturing processes such as laser welding, surface re-melting and alloying. Using analytical approaches that are already in existence, this research adapts a mathematical model to approximate temperature profiles as well as isothermal depths given a single laser pulse. In order to assess the error associated with the adapted model, laser irradiation experiments are carried out on CP titanium samples using a focal spot of 600 μm and nitrogen gas as the shielding gas at a flow rate of 5 l/min. The effects of some important laser processing parameters on the melt depth are discussed. The adapted model approximated that the melt depth increases with both increasing laser power and increasing pulse duration. Furthermore, the experimental results revealed that it is the combination of short pulses and a high laser power that yields melt zones that are relatively free of porosity, craters and cracking. Additionally, an assessment of the error associated with the adapted model revealed that the adapted model generally overestimates the experimental data with increasing laser pulse duration. At a combination of 0.1s and 1200W (representing a combination of short laser pulse and high laser power) the error of approximation was 59%. The error increased to 90% at a combination of laser parameters 5s and 600W (representing a combination of a long laser pulse and low laser power). It is recommended that future studies be undertaken to improve modelling accuracies for a wider range of laser processing parameters.
84

The solvent extraction of CU (II) from chloride solutions with certain non-chelating nitrogen donor ligands

Soldenhoff, Karin January 1986 (has links)
Summary in English. / Bibliography: pages 96-100. / The extraction of copper from chloride solutions with some aliphatic oximes as well as some pyridine carboxylates was studied and the complexes formed in the organic phase identified. The association of octanal oxime in toluene was taken into account in the extraction studies and formation constants for dimers and trimers obtained. Copper (II), Nickel (II) and Cobalt (II) are extracted by a solvating mechanism in which only the neutral MCl2 species is extractable. This reaction is largely independent of pH. Studies were also carried out on the use of the commercial reagent ACORGA CLX-20, for the selective extraction of copper from a synthetic solution simulating leach liquors obtained by ferric chloride leaching of complex sulphide ores. Results show that separation of copper from iron is dependent on the amount of acid and chloride present in the aqueous phase.
85

Investigating the potential of using hydrocyclone-fine screen hybrid systems to improve the performance of classification circuits

Muketekelwa, Saliya L January 2017 (has links)
Classification is an integral part of comminution operations that controls the performance of the circuit. Hydrocyclones are normally used to perform the classification function. They offer numerous advantages that include, the ability to handle high throughputs, low floor space occupation and relatively low capital and running costs. Despite these advantages, hydrocyclones are inherently inefficient classifiers as they are predominantly dependent on hydrodynamics to effect separation. This effect is more prominent in operations handling complex ores such as a dual-density ore, where the heavy fine particles are misplaced to the underflow and the lighter middling particles report to the overflow. Several attempts have been made to improve the separation efficiency of cyclones either by modification of the cyclone or use of multi-stage cycloning. Most of the results obtained from experimental and simulation studies have shown considerable improvements. Even though some have not yet found wide application in the minerals industry due to practical limitations related to control and unstable operations. More recently, fine screening has gained recognition in the classification role. This development has allowed the use of fine screens in closed-circuit grinding operations resulting in significant metallurgical and economic benefits. Screens provide a sharper cut at the desired size and reduce the fraction of fines bypassing classification compared to hydrocyclones but have capacity limitations at smaller apertures. In an effort to mitigate the classification challenges of both the hydrocyclone and fine screen, this study investigated the potential of combining the high throughput performance of the hydrocyclone operation and the high precision classification characteristics of fine screening to result in a hybrid classification circuit Plant scale tests were conducted using five different classification circuit configurations at an operational Base Metal Concentrator treating a polymetallic ore. The classification circuit configurations considered included (i) a two-stage hydrocyclone with primary underflow reclassification (ii) an inclined hydrocyclone, (iii) a fine screen and (iv) selected permutations of hybrid circuit designs that included a hydrocyclone-fine screen (2 stage) and two hydrocyclones-fine screen (3 stage) variants of the hybridised configurations. The efficiency curves and their respective key performance indicators were used to assess the performance of the circuit configurations tested. The results showed that classification circuits that included fine screens exhibited higher sharpness of separation compared to circuit configurations comprised of hydrocyclones. The fine screen configuration showed the sharpest separation while the hydrocyclone-fine screen hybrid configurations gave relatively higher separation efficiencies than the configurations with hydrocyclones only. The overall sharpness of separation values obtained for the two stage and three-stage hybrid circuits were 3.0 and 2.4, respectively. The two-stage hydrocyclone and inclined hydrocyclone circuits had sharpness of separation values of 1.7 and 0.5, respectively. The inclined hydrocyclone circuit configuration performed the poorest. Furthermore, the two-stage hybrid circuit showed a higher degree of separation compared to the three-stage hybrid configuration. However, it was observed that a finer corrected cut size was realised for the three-stage hybrid circuit design. The fishhook effect was seen at particle sizes less than 38μm for the configurations incorporating a fine screen and an inclined hydrocyclone. Notably, the effect appeared to be more pronounced in configurations involving a fine screen stage. The results have shown that application of hybrid classification configurations can improve the performance of classification circuits. In addition, reclassification of hydrocyclone underflow on fine screens will results in a sharper classification while reclassifying the overflow stream on fine screens will provide a clean circuit final product. An evaluation of the capital and operating costs associated with fine screens should be done to determine the economic feasibility of incorporating the units in conventional milling circuits.
86

An investigation into the relationship between electrochemical properties and flotation of sulphide minerals

Chimonyo, Wonder January 2016 (has links)
There is a growing importance in the mineral processing industry to find ways which are economic and effective in improving the recovery of minerals in the flotation process. The focus of this study was on the recovery by flotation of minerals found in the Merensky reef, which is one of the major reefs in the Bushveld complex. In that reef, base metal sulphide (BMS) minerals are commonly associated with PGMs and this has an effect on the way in which these minerals are concentrated by flotation (Vermaak et al. 2004; Wiese et al. 2005b; Miller et al. 2005; Schouwstra et al. 2000).A major problem in this process has been reported to be losses of valuable minerals (PGMs) associated with the loss of BMS (Wiese et al. 2005b), during flotation. The present investigation has focused on studying the relationship between the flotation of sulphide minerals using xanthates as collectors and the electrochemical properties of the flotation system. It is well known that electrochemical mechanisms in flotation systems have a major influence on flotation since the reactions occurring at the mineral/solution interface are of critical importance in the process (Woods, 1971).The aim of this study was to investigate the extent to which there was a relationship between the electrochemical reactions occurring in this ore which could indicate the effectiveness of the flotation process. The electrochemical reactions were studied by determining the redox potential changes occurring when various changes were made. These were the length of the alkyl chain length of the xanthate collector, changing the pH or using various chemical reagents to change the potential of the system. It was found from the rest potential measurements, that collectors of different chain length have different extents of interaction with mineral surface. A greater interaction, which is indicated by a greater change in the mixed potential after addition of the collector, is considered to be indicative of a greater adsorption of the collector at the mineral surface. It was hypothesized that this stronger adsorption by collectors of longer alkyl chain length would result in improved flotation performance. However, this was not observed to be the case and that was consistent with previous results on the relationship between the recovery of sulphide minerals in the Merensky ore and xanthates of different chain lengths. Thus it was shown that there was no correlation between the interactions between collectors of different alkyl chain lengths as determined through electrochemical studies and the flotation performance of valuable minerals under the tests conditions used.
87

The development and demonstration of a practical methodology for fine particle shape characterisation in minerals processing

Little, Lucy January 2016 (has links)
Due to continually declining ore grades, increasing mineralogical complexity, and increasing metal demand, models for the design and optimisation of minerals processing operations are of critical importance. These models do not currently incorporate particle shape, which, although rarely quantified, is known to affect numerous unit operations. Automated Scanning Electron Microscopy (Auto-SEM-EDS) is a widely used tool for mineralogical analysis. It also provides an opportunity for simple, quantitative and mineral-specific shape characterisation. Existing mineralogical databases could therefore become useful resources to facilitate the incorporation of shape effects in minerals processing models. A robust Auto-SEM-EDS shape characterisation methodology is required to ensure that the particle shape information in these databases is interpreted appropriately. For this work, a novel methodology for Auto-SEM-EDS shape characterisation was developed that is suitable for the analysis of fine particles (<75 μm). This involved testing the response of various shape descriptors to image resolution, and measurement with different devices and image processing routines. The most widely used shape descriptor in minerals processing, circularity, was found to be highly dependent on both image resolution and image processing settings, making it a poor choice for shape characterisation of fine particles. Roundness and aspect ratio were found to be more robust descriptors. However, in the interest of being able to compare particulate shape measurements across different studies, the precise definition of aspect ratio is important as variation in 'length' and 'width' definitions can significantly impact aspect ratio measurements. The possibility that preferential orientation of particles would introduce bias to the 2-D cross-sectional measurements was also addressed through comparison of roundness distributions measured from orthogonal cross-sections of a particulate sample mounted within a block of resin. The excellent repeatability of these measurements indicated that the particles were randomly orientated, and thus it can be inferred that 2-D measurements of a sufficient number of particles will be directly related to the particulate sample's 3-D properties. Roundness and aspect ratio were then used in conjunction to produce surface frequency distributions that allow for distinction between non-rounded particles that were smooth and elongated and non-rounded particles that were neither elongated nor smooth. Three applications of the shape characterisation methodology developed were then demonstrated, which highlighted some of the potential contributions that this methodology can make towards minerals processing. The applications were all based on a case study of the Upper Group 2 (UG2) Chromitite, a platinum group mineral (PGM) ore of key economic significance to South Africa.
88

An electrochemical and leach study of the oxidative dissolution of chalcopyrite in ammoniacal solutions

Moyo, Thandazile January 2016 (has links)
Chalcopyrite is not only the most abundant of the copper sulphides, but also the most stable, making it recalcitrant to hydrometallurgical treatment processes especially in atmospheric leaching. Hence, pyrometallurgical processes are traditionally used to treat chalcopyrite concentrates. However, ore grades are falling and concentration processes are becoming increasingly costly, prompting need to revisit hydrometallurgical treatment processes (especially heap leaching), which are otherwise regarded as relatively economic and environmentally friendly. Key hydrometallurgical processes for chalcopyrite treatment are ferric sulphate, chloride and ammoniacal systems. The ferric sulphate system does not work well under atmospheric conditions, except in combination with thermophilic microorganisms, whereas the chloride system has only recently been evaluated more seriously for heap leach processes. The ammonia system remains relatively unexplored and most studies date back more than 40 years, but the system has considerable potential for further development. Ammonia systems can be effectively used to leach copper from chalcopyrite in the presence of an oxidant. The ammoniacal leaching system is heavily reliant on a good surface mass transfer system, hence it being widely studied in high pressure systems where oxygen was accepted to be the oxidant. Leach reactors were designed to use agitation systems which promote the abrasion of an iron based deposit layer thought to passivate the mineral surface. Most research on the ammonia leaching systems has previously been carried out in controlled or bulk leaching studies and only a few used electrochemical studies. A disconnect exits between the two approaches, resulting in different proposed fundamental reaction mechanisms and kinetic understanding. A fundamental electrochemical and controlled leach study of the oxidative leaching of chalcopyrite in ammoniacal solutions has been undertaken. The study covered the following aspects: a description of the mixed potentials, chemistry and kinetics of the anodic reaction, the cathodic reduction of the oxidants, the formation and effect of surface deposits and lastly a look at how results from electrochemical studies compare to those from the leaching of a similar mineral sample under similar solution conditions. A detailed study of the mixed potentials on a more or less pure chalcopyrite electrode has shown the redox reactions on the surface of the mineral to be controlled by the oxidation of chalcopyrite and reduction of copper(II). The presence of oxygen has been found to have no significant effect on mixed potentials in ammoniacal solutions in the presence of initial copper(II). Constant potential and potentiodynamic studies on the anodic reaction have shown the rate of the anodic reaction to increase with an increase in potential in a standard 1M ammonia/ammonium sulphate solution (which buffers at pH 9.6) in exponential fashion supporting conventional Butler-Volmer behaviour with a anodic transfer coefficient of 0.42 and a rate constant k* CuFeS2 of 0.0431 cms⁻¹. Increasing total ammonia increased the rate of reaction only at low concentrations; at higher concentrations increasing total ammonia had no effect on the anodic reaction. An increase of pH at fixed total ammonia concentration showed an increase in reaction rate, but the effect cannot clearly be discerned from the concomitant shift in relative proportion of free NH₃ and NH₄⁺. Coulometric studies have shown the oxidation reaction to proceed via the formation of a thiosulphate intermediate and this to be a 7-8 electron transfer reaction. A surface deposit layer consisting of iron, oxygen and small quantities of sulphur was formed and the sulphur component of this product layer was seen to be gradually depleted during leaching. Anodic currents were found to gradually decrease with time and this was linked to the growth of the surface deposit layer. However, the surface deposit layer did not passivate the anodic reaction; instead, it was proposed that the surface deposit layer adsorbed copper ions and displayed "ohmic" behaviour. The formation of the surface deposit layer was found to apparently promote the cathodic reduction of copper(II). While reduction of copper(II) was shown to be the primary reduction reaction, the presence of oxygen was seen to promote this reduction reaction through the regeneration of copper(II) in experiments that ran for longer time periods. An apparent accumulation of copper(I) on the mineral surface was seen to adversely affect the rate of the cathodic reaction and thus the overall rate of dissolution. The nature and morphology of the surface layer was found to be significantly influenced by the choice of cation in solution, which was thought to influence primarily the complexation/precipitation of ferric species forming near the surface. The degree of agitation during leach studies influences the rate of leaching due to the fragmentation of surface deposits, which are seen to slow the anodic reaction. A kinetic model has been developed for the anodic and cathodic reactions. This thesis presents significant new findings regarding the role of the copper(I)/copper(II) redox couple on the oxidative leaching of chalcopyrite. It also highlights the potentially limiting role of the cathodic reactions which have frequently been overshadowed by the focus on chalcopyrite oxidation reactions. Furthermore, the growth of a surface inhibiting layer which cannot be removed in heap leach systems due to the lack of mechanical agitation can now potentially be addressed by looking into the complexation and precipitation characteristics of cations in solution for ammoniacal leach systems.
89

Fracture mechanics based fatigue and fracture toughness evaluation of SLM Ti-6Al-4V

Dhansay, Nur Mohamed January 2015 (has links)
The focus of this research project was to determine experimentally the fatigue and fracture toughness characteristic, from a fracture mechanics perspective, of Ti-6Al-4V titanium alloy manufactured by Selective Laser Melting (SLM). Three build orientations are considered where a fatigue crack is grown parallel and two are grown perpendicular to the build orientation. The project then endeavours to generate a fracture mechanics based Paris equation from the fatigue crack growth rate results and together with the fracture toughness, fatigue life predictions may be determined based on crack propagation lifetimes. SLM is an Additive Manufacturing (AM) technique whereby an object is fabricated in a layerwise manner via the use of lasers, directly from a 3D CAD model. This process allows for the manufacture of complex designs in its net or near net shape form, which is not possible with conventional manufacturing techniques. There are minimal amounts of material wastage and it potentially eliminates post manufacture machining and processing costs. Ti- 6Al-4V is used in many applications where high strength at low density is required at moderate temperatures. Corrosion resistance qualities of the alloy are also considered for many applications. Some of the applications where this alloy is used include turbine engine components, aircraft structural components, aerospace fasteners, high-performance automotive parts, marine applications, medical implant devices and sports equipment. Due to the large use of the alloy in industry and with the potential benefits of manufacturing by SLM, there is a great need for investigating SLM Ti-6Al-4V as a viable alternative to conventional casting, forging and machining. There is limited literature covering the fatigue crack growth rate and fracture toughness of SLM Ti-6Al-4V and the effect of build orientation on these characteristics. However, it is clear, from the limited available literature that fatigue crack growth rate behaviour is affected by build orientation, and so this project investigates the effect of these orientations, and aims to contribute to understanding why these orientation effects occur. Since there is even less literature available on the fracture toughness of SLM Ti-6Al-4V with respect to build orientation, this project also endeavours to characterise orientation effects on fracture toughness, if any, and compares these with those of conventionally manufacture Ti-6Al-4V.
90

Flow-injection analysis of the platinum-group metals

Auer, Derek January 1995 (has links)
Includes bibliographical references. / To date the principle methods for the determination of the platinum-group metals (PGMs) use an "off-line" assay with flame-atomic absorption spectrometry and visible spectrometry. Both suffer numerous interferences and involve time-consuming and arduous laboratory separation methods prior to analysis. An "on-line" method for the rapid assay of the PGMs is indeed a lacking component in the analysts' repertoire of methods. This study describes the development of spectrophotometric methods for the determination of the PGMs using flow-injection analysis (FIA). The principle of exploiting the remarkably specific and selective reaction of stannous halides with the PGMs to yield a series of intensely coloured complexes in acidic solutions forms the basis of these methods. The reaction is subject to relatively few interferences from other transition metals. A high speed scanning spectrophotometer is employed to obtain second order data. The successful manipulation of the data enables the determination of PGMs as single components and also simultaneously in mixtures. Attention is focused on the establishment of principles for successful multi-component analysis of PGMs. The development of a software program for multi-wavelength data manipulation was mandatory and is described. Criteria for successful selection of analytical wavelengths are discussed. The usefulness of multi-dimensional graphical data representation is demonstrated in a stop-flow study of the palladium reaction with tin (II) chloride. Qualitative information is provided regarding the nature of complexes and their interactions. Correlation of spectrophotometric data with complex solution colour changes is made. The requirements for future progress in multi-component FIA determinations as well as the direction for future research conclude the study.

Page generated in 0.0504 seconds