No description available.

In this thesis, the results of oxidation and decarburization experiments with pure iron-carbon alloys over the temperature range 800 - 950ºc, and in atmospheres of varying carbon monoxide - carbon dioxide ratio are reported. Most of the experimental work is concerned with a 1.065 weight percent carbon alloy at temperatures where austenite is the stable phase. Complex kinetic behaviour was observed for this alloy in the range 10 - 100 volume percent carbon dioxide. An analysis is given which in turn associates the kinetics with a pure diffusion controlled decarburization model and a pure surface controlled decarburization model. The latter best represents the interaction of the decarburization mechanism with the scaling process on Y - iron. Metallographic evidence is provided where possible in support of the results of the afore-mentioned analysis. Mathematical relations are introduced which attempt to describe qualitatively the kinetics of the carbon alloys in all the atmospheres employed. A statement is made as to the applicability of the model to carbon steels in general at temperatures where austenite is the stable phase and where the atmospheres employed are of various carbon monoxide - carbon dioxide ratio. / Thesis / Master of Science (MS)

Thesis--Copenhagen University. / Summary in Danish. Bibliography: p. [119]-141.

Thesis (M. Sc.)--University of Hong Kong, 1994. / Includes bibliographical references (leaves 69-75).

Thesis (Ph. D.)--University of Washington, 1999. / Vita. Includes bibliographical references (leaves 121-125).

Thesis--Copenhagen University. / Summary in Danish. Bibliography: p. [119]-141.

No description available.

No description available.

No description available.

This work is an experimental and theoretical analysis of factors and conditions affecting smoke and carbon monoxide (CO) production in corridor-like enclosure fires. Thirty eight experiments were performed in a three metre long corridor-like enclosure having a cross section 0.5 m x 0.5 m, door-like openings in the front panel and a propane gas burner located near the closed end. Measurements of smoke and carbon monoxide concentrations were performed at locations inside the enclosure and also in the exhaust duct of a hood collecting the combustion products. The main conclusion of this work is that smoke production depends not only on the fuel and Global Equivalence Ratio (GER) - as is reported in the literature - but also on the temperatures and residence time inside the enclosure, at least for the experimental conditions examined in this study. Additionally, it was found that the smoke concentration inside the enclosure was increasing during the ventilation controlled regime even after external burning started. Such increase was verified by temperature, smoke and velocity measurements inside the enclosure. The increase was due to reverse flow behind the flames travelling along the corridor. Namely, the gases reversed direction behind the flames with hot gases travelling in the upper layer backwards towards the closed end of the corridor in contrast to hot gas movements towards the opening in front of the flames. This recirculation was confirmed by velocity and oxygen concentration measurements in the upper and lower layers inside the enclosure. In addition, the present results show that the relationship reported in the literature between smoke and carbon monoxide production during overventilated conditions yco/ys ≈ constant, is no longer valid during an underventilated enclosure fire. The ratio yco/ys increases for the Global Equivalence Ratios of the enclosure greater than one. The obtained results are useful for CFD validation and specifically applicable for assessing smoke hazards in corridor fires in buildings where smoke concentrations can be much larger than anticipated owing to leakage to adjacent rooms behind travelling flames.