This master´s thesis deals with a draft of a health centre building in Chlumec nad Cidlinou. The centre is situated on a corner building site with barrier-free access near the city centre. The building is designed with simple functional lines ground on foundation strips with flat green roof. The perimeter walls, internal load-bearing and shear walls are from vertically perforated T&G block bricks. Internal non-load-bearing prefab walls are coated with plasterboard. Ceiling constructions and an attic are made of monolithic reinforced concrete. The building envelope is insulated with mineral wool. Most of the perimeter walls are coated with breathable facade made of lacquered galvanized lamellas and minor part of walls is compositely insulated and plastered with a scratched facade plaster. The health centre building is notionally divided into two masses with a three-storey west part and two-storey east part of the building. Both parts are mutually connected by vertical communication space with elevator looped by counter clockwise three-flight staircase. Ambulant health care will be provided in total 9 consulting rooms, 3 ambulant care offices and private clinic with 3 consulting rooms. Independent business of the commercial area and café provide the additional function. The master´s thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.

This Master´s thesis is focused on block of flats project documentation, claims for fire safety and thermal and acoustic properties of structures. The brick building is detached and has three floors without basement. These floors are connected by a lift. The block of flats is based on the footings, external walls are insulated by a contact thermal insulation system. The tent roof is consists of truss in two levels. The building is designed for nine flats and one of these flats is wheelchair accessible. Truss design is also a part of the project.

Diploma thesis solves the design of the elementary school. The building is situated in Letohrad in region Pardubice. The design of the school building contains small sport hall for pupils and for possible public access. Dinning room and the kitchen are the parts of the building. The object is designed as structural masonry system, ceramic bricks with external thermal insulation composite system. Building does not have a basement. The object is divided to three parts, teaching part, dining room with kitchen and sports hall with facilities. The building has two-storey in the teaching part, the remaining part is a single-storey with vegetation roof. All roofs are designed as a warm flat roof. The building is designed for capacity 150 pupils. Building ventilation is provided by air-conditioning equipment. Entrance to the building is barrier-free, it is installed a building elevator inside.

Diploma thesis addresses the implementation and design of the new library object. The proposed building will serve as public city library with the possession of 102 200 book units. The building will offer department for adults as well as kids section, technical literature, an audiovisual collection, computer rooms and study rooms, reading rooms. There are also plenty of chill zones. In the building are additional services as coffee shop, gallery and lecture hall for different kinds of events and purposes. Library has three floors and one basement solved as an underground parking lot. The building is roofed by warm flat roof. The structural system is reinforced concrete skeletal system with glass facade system, the external wall in some places as sanitary facilities, secondary staircase and coffee shop is walled with bricks with an external thermal insulation composite system. The ground plan of the library is square with dimensions 35, 45 x 35, 45 meters. The building is located in the city centre of Písek, surrounding terrain is slightly sloping. The solved area contains newly designed asphalt road, which leads to the underground parking lot.

The subject of my diploma thesis is the construction-technological project of apartment house in Dvůr Králové nad Labem. Thesis is focused on the most optimal technological procedures of foundation construction on deep foundations and total external insulation by external thermal insulation composite system. Regulations are supplemented by inspectional and trial plans, appropriate machinery and equipment of assembly site. Included is also work safety, time schedule and budget of substruture. The most interesting thing of my thesis will be model of the noise load on the surrounding objects resulting from the construction of apartment house which will the proposed appropriate measures of noise control.

Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.

This final thesis "Kindergarten Domino" was made as a project documentation for a building construction. The kindergarten is designed for 24 children. Kindergarden is designed as a detached building consists of two above-ground floors. Behind the building, there is a large garden, which is a part of the property. Building is situated on a sloping terrain in a walking distance from a residential area of Šlapanice. There are two operating units: technical part (managemant part) and activity unit. Kindergarten is planed as a masonry building, based on strip foundations.

The work is focused on the development of an environmentally friendly external thermal insulation composite system in terms of product composition and composition of the whole system. The intention is to develop an alternative to standard external thermal insulation composite systems. Undoubtely, standard systems have a contribution to energy savings (primary role), but their actual production and composition is also a burden on the environment. The research is focused onthe development of adhesive and leveling substance and plaster using progressive material with phase transformation and energy by-product (fly ash). Furthermore, it is focused on the selection of insulation from renewable sources. Therefore, there is paid attention to the overall composition of the thermal insulation system in order to achieve the most effective impact with respect to the environment. The goal is to achieve secondary energy and resource savings due to the composition of components and also the composition of the entire system.

The subject of the diploma thesis is to elaborate the project documentation of a newbuilt multifunctional building in Považská Bystrica. The multifunkcional building is designed as a three-storey without basemen. In the first ground floor there are dental and gynecological surgeries with facilites, a cafe and director's office. In the second there are office spaces with facilities for rent. On the level of the third floor there are two-rooms flats and one four-room flat, while there are also storage spaces for each of the flats. The building of the multifunctional house is based on reinforced concrete foundations. The vertical construction system consist of reinforced concrete perimeter walls and perimeter reinforced concrete columns in combination with an internal load-bearing walls of the reinforcing core of the building. The partition walls are designed as a plasterboard walls. The horizontal load-bearing structures are made of reinforced concrete prestressed panels. The roofing of the building is designed as a flat one-layer roof. The roof of the terrace consist of an extensive vegetation flat one-layer roof. The roofing of the awning at the main entrance to the building is design as a reinforced concrete monolithic console with one-layer flat roof a skylight. The building is insulated with the external thermal insulation composite system (ETICS). The façade of the communication core of the building is made of brick cladding. The rest of the façade is made of a thin layer white plaster.

The subject of the diploma thesis is to elaborate the project documentation of a newbuilt wellness hotel located in the village of Lipno nad Vltavou. The building is designed as a non-basement one with three floors. It is visually divided into several parts. On the first floor there are two operational parts – a wellness and a restaurant. On the second and third floor there are small apartments for temporary guests' accommodation. The building foundations are made of concrete and reinforced concrete. The load-bearing structure is made of aerated concrete blocks and sand-lime blocks. The ceiling structures are made of cast-in-place reinforced concrete. The roof of the first floor is designed as a one-layer flat extensive green roof. The roofing of a main reception is designed by a sloping roof and the third floor as three adjoining sloping roofs. These roofs are formed by a system of aerated concrete roof panels and a water-dissipating layer of folded sheet metal. The building is insulated with an external thermal insulation composite system (ETICS). The part of the facade consist of facade cladding strips and part of the render of light color.