Ce mémoire décrit la synthèse, la caractérisation spectroscopique et l’étude de la réactivité catalytique d’une nouvelle série de complexes pinceurs de Ni(II) formés à partir du ligand POCOPPh (P,C,P-2,6-{Ph2PO}2C6H4), très peu étudié dans le cas du nickel. Les études décrites dans ce mémoire examinent l’effet des substituants des phosphines sur les propriétés spectroscopiques et électrochimiques ainsi que les activités catalytiques. La synthèse du ligand a été améliorée par rapport à la procédure connue dans la littérature en diminuant le temps de réaction à 30 min et la température jusqu'à température ambiante. Les composés pinceur (P,C,P-2,6-{Ph2PO}2C6H3)NiX ont été obtenus avec des rendements variant entre 60% et 88%. Le premier complexe a été synthétisé en faisant réagir le précurseur NiBr2(NCCH3)x avec le ligand POCOPPh pour donner (POCOPPh)NiBr. Ce dernier réagit par la suite avec les sels d’argent et de potassium pour donner 4 nouveaux complexes soient : (POCOPPh)NiCN, (POCOPPh)NiOTf, (POCOPPh)NiOAc et (POCOPPh)NiONO2 (OTf = triflate et OAc = acetate). Vu la réactivité limitée du dérivé bromure, le dérivé (POCOPPh)NiOTf a été utilisé pour la préparation du composé (POCOPPh)NiCCPh. Le dérivé Ni-OTf a été utilisé également pour la synthèse des complexes (POCOPPh)NiR qui ont été détectés par RMN. Ces complexes (POCOPPh)NiR ont montré une stabilité trop faible et donnent des nouveaux complexes de type (POCOPPh)NiX en échangeant l’halogène avec le Mg ou de type (POCOPPh)NiOH en s’hydrolysant. Les espèces cationiques [(POCOPPh)NiNCR][OTf] (R= Me, CHCH2, CHCHMe, C(Me)CH2, NCCH2CH2N(Ph)H) ont été obtenues facilement et avec des bon rendements à partir du (POCOPPh)NiOTf. Tous les composés obtenus ont été caractérisés par la spectroscopie RMN (1H, 13C{1H}, 31P{1H}, 19F{1H}), la spectroscopie IR et la spectroscopie UV-vis. L’analyse élémentaire et l’analyse par la diffraction des rayons X, dont le but est de résoudre la structure à l’état solide, ont été utilisées pour la plupart des complexes. Des études de voltampérométrie cyclique ont été menées pour déterminer la densité électronique des centres métalliques et l’effet des phosphines sur cette propriété électrochimique. Dans le but de déterminer l’effet des substituants des phosphines sur l’activité catalytique des complexes, nous avons évalué les réactivités catalytiques des deux complexes (POCOPPh)NiOTf et (POCOPi-Pr)NiOTf dans la réaction d’hydroamination des oléfines activés et plus spécifiquement l’acrylonitrile. Après optimisation des conditions expérimentales, on a constaté que la réactivité des deux composés sont similaires mais une grande différence apparaît après l’ajout des additifs. En effet, le complexe (POCOPi-Pr)NiOTf donne une bonne activité catalytique en présence de la triéthylamine, tandis que cette activité diminue considérablement en présence d’eau, contrairement au complexe (POCOPPh)NiOTf qui est plus actif en présence d’eau. Dans le cas du complexe (POCOPPh)NiOTf, on a pu montrer que la base se coordonne au nickel dans le produit formé après la réaction d’hydroamination, ce qui diminue l’activité de ce complexe dans certains cas. Également on a exploré la réaction de l’addition du lien O-H sur l’acrylonitrile, et étonnamment le complexe (POCOPPh)NiOTf est beaucoup plus actif que son homologue (POCOPi-Pr)NiOTf dans le cas des alcools aromatiques. Par contre, les alcools aliphatiques restent un défi majeur pour ce genre de complexe. Le mécanisme de cette réaction qui a été proposé montre que l’alcoolyse passe par les deux intermédiaires (POCOPPh)NiOAr et [(POCOPPh)NiOAr][HOAr] mais l’isolation de ces intermédiaires observés par RMN semble être difficile. / This thesis describes the synthesis, spectroscopic characterization and the catalytic activities of a new family of pincer complexes of Ni (II) starting from the ligand POCOPPh (P,C,P-2,6-{Ph2PO}2C6H4) for which very few nickel complexes have been reported previsouly. We discuss the influence of P-substituents on the spectroscopic, electrochemical and catalytic activities of these complexes. The synthesis of POCOPPh has been improved comparatively to the procedure reported in the literature by reducing the reaction time to 30 minutes and the temperature to room temperature. The complex (P,C,P-2,6-{Ph2PO}2C6H3)NiBr was obtained with 88% yield by reacting the precursor NiBr2(NCCH3)x with POCOPPh . This complex was then reacted with various silver and potassium salts to give the following complexes (POCOPPh)NiCN, (POCOPPh)NiOTf, (POCOPPh)NiOAc and (POCOPPh)NiONO2 (OTf = triflate et OAc = acetate). The limited reactivity of the bromo derivative led us to use (POCOPPh)NiOTf for the preparation of some of the desired derivatives, such as (POCOPPh)NiCCPh. Attempts to prepare the desired alkyl derivatives (POCOPPh)NiR were not successful, but we were able to detect these derivatives using NMR. The thermal instability of (POCOPPh)NiR led to formation of new (POCOPPh)NiX complexes by halogen exchange with MgX2 or (POCOPPh)NiOH by hydrolysis. The cationic species [(POCOPPh)NiNCR][OTf] (R = Me, CHCH2, CHCHMe, C(Me)CH2, NCCH2CH2N(Ph)H) also were obtained easily from the (POCOPPh)NiOTf with good yields. All these complexes were characterized by elemental analysis, NMR spectroscopy (1H, 13C{1H} 31P{1H}, 19F{1H}), IR spectroscopy and UV-vis spectroscopy. For most complexes analysis by X-ray diffraction allowed us to establish their solid state structures. A few studies by cyclic voltammetry have been done to determine the electronic density of the metal center and the P-substituent influence on this characteristic. In order to investigate the effect of phosphine substituents on the catalytic activities of this type of complexes, catalytic studies were undertaken with the following two complexes (POCOPPh)NiOTf and (POCOPi-Pr)NiOTf in hydroamination of activated olefins specifically acrylonitrile. After optimization of experimental conditions, it was found that both complexes have similar activities but what makes a huge difference is the use of additives. Indeed, (POCOPi-Pr)NiOTf showed good catalytic activity in the presence of triethylamine as base but this activity decreased significantly in the presence of water. The opposite was observed with (POCOPPh)NiOTf complex: it was shown that triethylamine coordinates to the nickel center in this complex and hence reduces its activity in some cases. We Also explored other reactions such as the addition of the O-H bond in aromatic alcohols to acrylonitrile, and it was surprising that (POCOPPh)NiOTf is much more active than its homologous (POCOPi-Pr)-NiOTf. However aliphatic alcohols remain a major challenge for this kind of complex. Mechanistic studies suggest that this reaction passes through the following intermediates (POCOPPh)NiOAr and [(POCOPPh)NiOAr][HOAr]. These species were observed by NMR but not isolated.

Electrochemistry is the science of electron transfer. The subject is of great importance and appeal because detailed information can be obtained using relatively simple experimental techniques. In general, the raw data is sufficiently complicated to preclude direct interpretation, yet is readily rationalised using numerical procedures. Computational analysis is therefore central to electrochemistry and is the main topic of this thesis. Chapters 1 and 2 provide an introductory account to electrochemistry and numerical analysis respectively. Chapter 1 explains the origin of the potential difference and describes its relevance to the thermodynamic and kinetic properties of a redox process. Voltammetry is introduced as an experimental means of studying electrode dynamics. Chapter 2 explains the numerical methods used in later chapters. Chapter 3 presents a review of the use of nanoparticles in electrochemistry. Chapter 4 presents the simulation of a random array of spherical nanoparticles. Conclusions obtained theoretically are experimentally confirmed using the Cr³⁺/Cr²⁺ redox couple on a random array of silver nanoparticles. Chapter 5 presents an investigation into the concentration of supporting electrolyte required to make a voltammetric experiment quantitatively diffusional. This study looks at a wide range of experimental conditions. Chapter 6 presents an investigation into the deliberate addition of insufficient supporting electrolyte to an electrochemical experiment. It is shown that this technique can be used to fully study a stepwise two electron transfer. Conclusions obtained theoretically are experimentally confirmed using the reduction of anthracene in acetonitrile. Chapter 7 presents a new method for simulating voltammetry at disc shaped electrodes in the presence of insufficient supporting electrolyte. It is shown that, under certain conditions, the results obtained from this complicated simulation can be quantitatively obtained by means of a much simpler ‘hemispherical approximation’. Conclusions obtained theoretically are experimentally confirmed using the hexammineruthenium ([Ru(NH₃)₆]³⁺/[Ru(NH₃)₆]²⁺) and hexachloroiridate ([IrCl₆]²⁻/[IrCl₆]³⁻) redox couples. Chapter 8 presents an investigation into the voltammetry of stepwise two electron processes using ionic liquids as solvents. It is shown that these solvents can be used to fully study a stepwise two electron transfer. Conclusions obtained theoretically are experimentally confirmed using the oxidation of N,N-dimethyl-p-phenylenediamine in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄ mim][BF₄]). The work presented in this thesis has been published as 7 scientific papers.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

L'oxydoréduction des monocouches auto-assemblées («Self-assembled monolayers ou SAMs) de ferrocenyldodecanethiolates sur une surface d'or (Fc(CH2)12SAu) dans des solutions aqueuses de n-alkyle sulfate de sodium (6, 8, 10 et 12 atomes de carbone) est étudiée par spectroscopie de résonance des plasmons de surface («Surface Plasmons Resonance ou SPR) couplée avec de la voltampérométrie cyclique (VC). La technique SPR est utilisée pour suivre en temps réel l'adsorption des tensioactifs en fonction du potentiel appliqué. Elle permet de quantifier l'épaisseur et le recouvrement des molécules adsorbées pour déterminer l'organisation des tensioactifs anioniques sur la SAM. La VC est utilisée afin de caractériser l'oxydation du groupement ferrocène en présence des n-alkyle sulfate de sodium qui s'associent à la SAM grâce à l'appariement entre le ferrocénium et le groupement sulfate. Des mélanges binaires d'alkylesulfates de différentes compositions sont utilisés dans le but de déterminer l'organisation induite par une réaction d'oxydoréduction. L'effet de la longueur de la chaîne d'hydrocarbures sur la quantité de tensioactifs anioniques adsorbés ainsi que les affinités relatives d'appariement des anions alkyle sulfate aux ferrocéniums sont rapportés dans ce mémoire. Ces surfaces électrosensibles permettront la détection de molécules amphiphiles et la compréhension du comportement de mélanges binaires de tensioactifs. Ainsi, ces travaux apporteront une avancée sur la modulation électrochimique de l'organisation de matériaux sur des substrats solides basée sur l'appariement d'ions. / The redox-induced pairing from aqueous solution of a homologous series of sodium n-alkyl sulfate (6, 8, 10 and 12 carbon atoms) to self-assembled monolayers (SAMs) of ferrocenyldodecanethiolates on a gold surface (Fc(CH2)12SAu) is investigated by spectroscopy of surface plasmon resonance (SPR) coupled with the cyclic voltammetry (CV). The SPR technique is used to monitor in real time the adsorption of surfactant in function of the applied potential. It quantifies the adsorbed layer thickness and surface coverage to determine the organization of anionic surfactants on SAM. CV is used to characterize the oxidation of ferrocene group in the presence of sodium n-alkyl sulfates that associate with SAM through matching between the ferrocenium and sulfate group. Binary mixtures of alkylesulfates of different compositions are used to determine the structure induced by a redox reaction. The effect of the length of the hydrocarbon chain on the amount of anionic surfactants adsorbed and the relative affinities of matching the ferroceniums alkyl sulfate anions are reported in this thesis. These electrosensitive surfaces allow the detection of amphiphilic molecules and the understanding the behavior of binary mixtures of surfactants. Thus, this work will result in progress on the electrochemical modulation organizing materials on solid substrates based on the ion-pairing.

This diploma thesis is focused on the determination of chloramphenicol by differential pulse voltammetry (DPV), DC voltammetry (DCV), cyclic voltammetry (CV) and adsorptive stripping voltammetry (AdSV) on a meniscus modified silver solid amalgame electrode (m- AgSAE). For the determination of chloramphenicol the optimum conditions were found and under these conditions concentration dependences were measured and then limits of quantification were determined. The influence of pH of BR buffer was tested. For determination of chloramphenicol by DCV pH 7 was chosen as an optimum background and pH 8 was chosen as an optimmum for DPV determination. Under these conditions linear dependences were obtained in the concentration range of 1·10-6 - 1·10-4 mol·l-1 . The limit of detection of chloramphenicol by DCV was 2.3·10-6 mol·l-1 . The limit of detection of chloramphenicol by DPV was 2.1·10-6 mol·l-1 in distilled water, 2.9·10-6 mol·l-1 in river water and 4.2·10-6 mol·l-1 in drinking water. Electrochemical behavior of chloramphenicol was studied by cyclic voltammetry in BR buffer with pH 2, 6, 8, 12 and then mechanism of reduction of chloramphenicol was propose based on available literature. Chloramphenicol was determined in drug Spersadex by DPV in BR buffer with pH 8. The optimal conditions for determining...

This work was focused on study of a behaviour of the food additivum butylated hydroxyanisole on modified carbon electrodes by the voltammetric techniques - cyclic and differential pulse voltammetry. Glassy carbon and carbon paste electrode were used. Multiwalled carbon nanotubes (MWCNT) in combination with three different binders (acetonitrile, nafione or chitosane) were employed for the electrode modification. Carbon paste electrode was unable to modificate with film containing carbon nanotubes and acetonitrile, its active surface was treated only with nafione and chitosane film. All three mentioned modifications were applied in case of glassy carbon electrode. Butylated hydroxyanisole provided a significantly higher signal using electrodes modified with carbon nanotubes with all three binders in contrast to electrodes without any surface modification. The glassy carbon electrode with carbon nanotube / acetonitrile film on its surface appeared to be the most effective for analytical purposes. Voltammetric determination of butylated hydroxyanisole using this electrode provided a better defined and higher analytical signal and lower relative standard deviations in comparison with other ways of modification. The limit of detection of butylated hydroxyanisole obtained by cyclic voltammetry on glassy...

of the Diploma Thesis In this Diploma Thesis, the electrochemical behavior of 4-nitrophenol (4-NP) was studied at a newly prepared large-surface carbon film electrode (ls-CFE) using techniques of DC voltammetry (DCV) and differential pulse voltammetry (DPV) with the aim to develop sensitive analytical methods for its determination. Voltammetric behavior of 4-NP was investigated in the region of anodic potentials, in dependence on the pH of the medium used (realized using Britton-Robinson buffer). The optimum pH values for the determination of 4-NP were chosen as follows: pH 3.0 (for DCV) and pH 7.0 (for DPV). During anodic oxidation of 4-NP on the ls-CFE at the concentration of the analyte of 1·10-4 mol/l, the passivation of the electrode surface occurred. Thus, it was decided to record series of measurements always at a new carbon film. Using the sample of 4-NP (at the concentration of 1·10-4 mol/l), the repeatability of the application of individual carbon films was tested, with obtained RSD values of 3.7% and 3.6% for DCV and DPV, respectively. Under optimum conditions, the calibration dependences of 4-NP were measured in the concentration range from 1·10-6 to 1·10-4 mol/l, with the limits of quantification (LQs) of 1.5·10-6 mol/l (for DCV at the ls-CFE) and 4.6·10-7 mol/l (for DPV at the...

Presented Diploma Thesis deals with the study of electrochemical behavior of 5-nitroimidazole (5-NI), with the search for optimal conditions for its determination using techniques of DC voltammetry (DCV) and differential pulse voltammetry (DPV) at a mercury meniscus modified silver solid amalgam electrode (m-AgSAE) and at a boron-doped diamond film electrode (BDDFE), and with the comparison of reached limits of quantification (LQs). The optimal conditions found for measuring calibration dependences of 5-NI at the m-AgSAE in deionized water were as follows: Britton-Robinson buffer of pH 7.0 and 10.0 for DCV and DPV, respectively. At both thechniques, it is advisable to use an electrochemical regeneration of the electrode surface by the application of a couple of regeneration potentials Ereg,1 = 0 mV and Ereg,2 = −800 mV. The calibration dependences were measured in the concentration range from 1·10−6 to 1·10−4 mol·l−1 , with the LQs of 1.0·10−6 mol·l−1 for DCV at the m-AgSAE and 1.5·10−6 mol·l−1 for DPV at the m-AgSAE. The concentration dependences of 5-NI at the BDDFE were measured using the DCV technique in the BR buffer of pH 3.0. For the DPV technique, the optimal medium seemed to be the BR buffer of pH 2.0, however, because of the presence of an interfering peak in the supporting electrolyte,...

This thesis deals with electrochemical behaviour of tauroursodeoxycholic acid (TUDCA) at silver solid amalgam electrode modified by mercury meniscus (m-AgSAE), polished silver solid amalgam electrode (p-AgSAE) and hanging mercury dropping electrode (HMDE). This thesis is a part of a bigger scientific research that deals with synthesis and characterization of supramolecular systems based on natural steroid compounds and its conjugates. TUDCA offers one reduction peak at m-AgSAE in the environment of Britton - Robinson buffer in range of pH 6.0 - 13.0. The potential of this peak is around −1200 mV. Using cyclic voltammetry was determined that the process on the electrode surface is quasireversible, the reduction is controlled by diffusion and the anodic process is controlled by adsorption. Concentration dependence measured at HMDE by direct current voltammetry in 0.04 mol∙l-1 borat buffer (pH 9.1) is linear in two concentration intervals - 1∙10-3 - 2∙10-4 mol∙l-1 and 1∙10-4 - 8∙10-6 mol∙l-1 of TUDCA. There was no linear dependence between the increase of concentration of TUDCA and the height of the peak obtained on amalgam electrodes by methods DC, DP, cyclic and "square-wave" voltammetry. On HMDE was in several short concentration intervals measured by a CV method a linear dependence of cathodic and...

The proton exchange membrane fuel cell generates electricity from hydrogen and oxygen (from air) through electrocatalytic reactions in an electrochemical cell. The Pt/C catalyst, commonly used in PEM fuel cells, is very sensitive to impurities that can interact with the active catalyst sites and limit fuel cell performance. Unfortunately, most hydrogen is currently produced from fossil sources, and inevitably contains impurities. The subject of this thesis is the effect of hydrogen impurities on the operation of a PEM fuel cell using a Pt/C anode. The impurities studied are carbon monoxide (CO), carbon dioxide (CO2), and selected hydrocarbons. Particular focus is given to the interaction between the impurities studied and the anode catalyst. The main method used in the study involved performing cyclic voltammetry and mass spectrometry, simultaneously. Other electrochemical techniques are also employed. The results show that all the impurities studied adsorb to some extent on the Pt/C catalyst surface, and require potentials comparable to that of CO oxidation, i.e., about 0.6V, or higher to be removed by oxidation to CO2. For complete oxidation of propene, and toluene, potentials of above 0.8, and 1.0V, respectively, are required. The unsaturated hydrocarbons can be desorbed to some extent by reduction, but oxidation is required for complete removal. Adsorption of ethene, propene, and CO2 is dependent on the presence of adsorbed or gaseous hydrogen. Hydrogen inhibits ethene and propene adsorption, but facilitates CO2 adsorption. Adsorption of methane and propane is very limited and high concentrations of methane cause dilution effects only. The adlayer formed on the Pt/C anode catalyst in the presence of CO2, or moderate amounts of hydrocarbons, is found to be insffuciently complete to notably interfere with the hydrogen oxidation reaction. Higher concentrations of toluene do, however, limit the reaction. / Polymerelektrolytbränslecellen genererar elektricitet fran vätgas och syrgas (fran luft) genom elektrokatalytiska reaktioner i en elektrokemisk cell. Den platina-baserade katalysator som oftast används i dessa bränsleceller är känslig mot föroreningar, då dessa kan interagera med katalysatorns aktiva yta, och därmed begränsna bränslecellens prestanda. Tyvärr produceras dagens vätgas huvudsakligen fran fossila källor och innehåller därför oundvikligen föroreningar. Denna avhandling behandlar hur olika vätgasföroreningar påverkar katalysatorns aktivitet och bränslecellens drift. De föroreningar som studeras är kolmonoxid (CO) och koldioxid (CO2), samt ett antal mindre kolväten. Störst fokus ligger på hur dessa föroreningar interagerar med anodens Pt/C katalysator. Den metod som huvudsakligen används är cyklisk voltammetri kombinerat med masspektrometri, men flera elektrokemiska metoder har använts. Resultaten visar att alla undersökta föroreningar adsorberar på Pt/C katalysatorns yta i större eller mindre utstreckning. For att avlägsna det adsoberade skiktet genom oxidation till CO2 krävs potentialer jämförbara med CO oxidation, dvs ca 0,6V, eller högre. Fullständig oxidation av propen eller toluen kräver potentialer högre än 0,8V respektive 1,0V. De omättade kolvätena kan delvis avlägsnas genom reduktion, men fullständig avlägsning kräver oxidation. Närvaron av väte, i gasform eller adsorberat pa katalysatorn, hämmar adsorptionen av eten och propen, men främjar CO2 adsorption. Metan och propan adsorberar i mycket begränsad utstreckning på Pt/C katalysatorns yta. De prestandaförluster som uppstår av höga koncentrationer av metan förklaras av utspädning av vätgasen. Det adsorberade skiktet som bildas när Pt/C katalysatorn exponeras för CO2 eller måttliga koncentrationer av studerade kolväten, är inte tillräckligt heltäckande for att märkbart påverka vätgasreduktionen. Däremot kan höga koncentrationer av toluen begränsa reaktionen. / <p>QC 20161010</p>