The comparison of rheological properties (complex shear modulus and phase angle and dynamic viscosity) of four paving bitumens and two polymer modified bitumens is performed in this diploma thesis. Furthermore, the empirical tests (needle penetration and softening point) were determined on these binders. Effect of asphalt binders aging was modeled using RTFOT test and modified RTFOT test (3 x RTFOT).

Diploma thesis is particularly focused on ageing of asphalt mixtures and asphalt binders. In the theoretical part an array of methods simulating short term and long term ageing consequently is introduced. The main objective of the practical part was to carry out the long-term ageing test method BSA (Braunschweiger Alterung). Thereafter, specimens testing for stiffness properties according to CSN EN 12697-26 were made. After conducting the measurement on those, asphalt binder was extracted and processed to follow-up testing. The testing consisted of a range of methods – Penetration CSN EN 1426, Ring and Ball test CSN EN 1427, Determination of the Frass breaking point CSN EN 12593, Determination of complex shear modulus CSN EN 14770 and Dynamic viscosity using a dynamic shear rheometer (DSR). The given results were assessed in the last part in order to evaluate the rate of the binder degradation caused by the method BSA.

The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.

The theoretical part of this thesis describes the rheology of bituminous binders, aging of asphalt binders and laboratory methods simulating short and long term aging. The following describes an empirical tests (needle penetration, softening point ring ball method) and functional tests (complex shear modulus and phase angle, dynamic viscosity), which are performed in the dynamic shear rheometer. At the end of this section, laboratory aging of bituminous binders using method RTFOT and method RTFOT + PAV is described in more detail. In the practical part of this thesis, the results of all tests performed on the binders aged using RTFOT + PAV are introduced and compared with results of properties of non-aged binders and binders aged by 3xRTFOT.

The subject of the thesis is to describe the effect of fluxing additives on the behaviour of asphalt binders. Emphasis will be placed on changes in rheological properties of asphalt binders at intermediate temperatures, stability during aging and influence of fluxing agents on their low-temperature properties. Theoretical part will deal with the principle of asphalt binders aging and it will summarize knowledge about fluxing additives. Further, empirical and functional tests will be described in order to evaluate asphalt binders. In the practical part, all laboratory tests will be evaluated and the effects of two different fluxing additives will be compared.

This master´s thesis deals about insulation and dielectric properties of water. It describes the structure of water, covalent and hydrogen bonds. It outlines primary chemical and physical properties of water and then it describes parameters of water - dynamic viscosity, conductivity, surface tension, pH and also describes dielectric properties - dielectric loss, loss factor, permittivity, polarization. Part of the work is practical section, which includes measurements of deionized water, destilled water, tap water and shows primary dependence such as dependence loss factor on frequency or relative permittivity on frequency.