Spelling suggestions: "subject:"[een] ELECTROMAGNETISM"" "subject:"[enn] ELECTROMAGNETISM""
171 |
Some new adaptive edge element methods for Maxwell's equations. / CUHK electronic theses & dissertations collectionJanuary 2007 (has links)
In the first part, an efficient and reliable a posteriori error estimate is derived for solving three-dimensional static Maxwell's equations based on the lowest order edge elements of the first family. We propose an adaptive finite element method and establish convergence of the adaptive scheme in energy norm under a restriction on the initial mesh size. Any prescribed error tolerance is thus achieved in a finite number of steps. For discretization based on the lowest order edge elements of the second family, a similar adaptive method is designed which guarantees convergence without any initial mesh size restriction. The proofs rely mainly on error and oscillation reduction estimates as well as the Galerkin orthogonality of the edge element approximation. For time-dependent Maxwell's equations, we deduce an efficient and reliable a posteriori error estimate, upon which an adaptive finite element method is built. / In this thesis, we will address three typical problems with discontinuous coefficients in a general Lipschitz polyhedral domain, which are often encountered in numerical simulation of electromagnetism. / The second part deals with a saddle point problem arising from Maxwell's equations. We present an adaptive finite element method on the basis of the lowest order edge elements of the first family and prove its convergence. The main ingredients of the proof are a novel quasi-orthogonality, which replaces the usual Pythagoras relation, which fails in this case, all error reduction depending on an efficient and reliable a posteriori error estimate and an oscillation reduction. We show that this adaptive scheme is a contraction for the sum of some energy error plus the oscillation. Likewise, the above result is generalized to the discretization by the lowest order edge elements of the second family. / We introduce in the third part an adaptive finite element method for solving the eigenvalue problem of the Maxwell system based on an inverse iterative method. By modifying the exact inverse iteration algorithm involving an inner saddle point solver, we construct an adaptive inverse iteration finite element algorithm, which consists of an inexact inner adaptive procedure for a discrete mixed formulation in place of the original saddle point problem. An efficient and reliable a posteriori error estimate is obtained and the convergence of the inner adaptive method is proved. In addition, the important convergence property of the algorithm is studied, which ensures the errors between true solutions (eigenfunction and eigenvalue) and iterative ones to fall below any given tolerance within a finite number of iterations. / Xu, Yifeng. / "June 2007." / Adviser: Jun Zou. / Source: Dissertation Abstracts International, Volume: 69-01, Section: B, page: 0357. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2007. / Includes bibliographical references (p. 166-175). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in English and Chinese. / School code: 1307.
|
172 |
Problemas de campos eletromagnéticos estáticos e dinâmicos; Uma abordagem pelo método dos elementos finitos. / Statics and dynamics electromagnetics problems: an approach by the finite element method.Jose Roberto Cardoso 04 March 1986 (has links)
A ideia de realizar este trabalho surgiu durante do curso de pós-graduação, ministrado pelo Prof. M. Drigas, \"Tópicos especiais sobre máquinas elétricas\", realizado no 2º semestre de 1980 na EPUSP, onde foi observada a necessidade do conhecimento das distribuições de campos magnéticos em dispositivos eletromecânicos com o objetivo de se prever seu desempenho na fase de projeto. Nesta época, já havia sido apresentada a tese do Prof. Janiszewski, o primeiro trabalho, de nosso conhecimento realizado no Brasil nesta área, onde foi desenvolvida a técnica de resolução de problemas de Campos Magnéticos em Regime Estacionário, que, evidentemente, não pode ser aplicada na resolução de problemas onde a variável tempo está envolvida; baseado neste tese, em 1982 o Prof. Luiz Lebensztajn, reproduziu o trabalho do Dr. Janiszewski o qual foi aplicado para verificar a consistência dos resultados práticos na tese de Livre Docência do Prof.. Dr. Aurio Gilberto Falcone. As formulações mais frequentes do Método dos Elementos Finitos (MEF), publicada nos periódicos internacionais, são baseadas no Cálculo Variacional, onde o sistema de equações algébricas não linear resultante, é derivado a partir da obtenção do extremo de uma funcional que em algumas situações não pode ser obtida, limitando assim sua aplicação. Em decorrência deste fato, o primeiro objetivo deste trabalho foi organizar os procedimentos para obtenção do sistema de equações de MEF aplicado à resolução de problemas de campo descritos por equações diferenciais não lineares, sem a necessidade. Algumas contribuições interessantes são encontradas no Capítulo II, referente à formulação do MEF para problemas de campo descrito por operadores diferenciais não auto-adjuntos.No Capítulo III são apresentadas as técnicas de montagem das matrizes, bem como aquelas de introdução das condições de contorno, originárias deste método, que muito embora sejam técnicas de aplicação corriqueiras, ajudarão em muito o pesquisador iniciante nesta área, sem a necessidade de recorrer a outro texto. No Capítulo VI são apresentadas as formulações necessárias para a solução de problemas de campos eletromagnéticos estáticos, para elementos de quatro lados retos (e curvos) assim como a técnica utilizada na obtenção da relutividade em meios não lineares. No Capítulo V são tratados os problemas de campo, onde a variável tempo está envolvida, permitindo assim a resolução de uma série enorme de problemas referentes aos campos de natureza eletromagnética, tais como os fenômenos transitórios e o Regime Permanente Senoidal. Os aspectos computacionais ligados ao trabalho estão expostos no Capítulo VI, onde são apresentadas as rotinas de resolução do sistema de equações resultante adaptadas às particularidades do problema, e as rotinas de integração numérica de problemas descrito por equações diferenciais dependentes do tempo de primeira e segunda ordem. Algumas técnicas apresentadas nestes Capítulos, são aplicadas espe3cificamente para a obtenção da distribuição de campo magnético no Capitulo VII deste trabalho, com o objetivo de analisar o desempenho de um transformador em regime transitório, onde é confirmada a consistência do método. / The idea of making this work came during a graduation course, \" Special topics on electric machines\", lectured by Prof. Dr. M. Drigas during the 2nd semester of 1980 at EPUSP, when the need of knowing the distribution of magnetic fields in electromechanics devices was notices, in order to foresse its performance during design. At that time, the first work about this subject realized made in Brazil was presented in prof. Janiszewski\'s thesis, where a technique was developed to solve Steady-State Magnetic Fields. However, it is clear that when the time variable is considered, this technique cannot be applied. The usual formulations of the Finite Element Method, published in international journals, was based on Variational Calculations, where the resulting non-linear algebraic equations system is derived from the extreme of a functional, which sometimes cannot be obtained, limiting in this way its application. Consequently, the first aim of this work is to organize procedures to obtain the Finite Method equations system, in order solve non-linear differential equations of fields, without the need of a previous functional for the problem. In Chapter II, one will find some interesting contributions referred to the Finite Element Method formulation, in the description of field problems by the use of non self-adjacent differentials operations.Matrix building techniques are presented in Chapter III, as well as the introduction of boundary conditions in this method. In spite of being an ordinary technique, it will help the beginners a lot, eliminating the need of other sources. Chapter IV presents the necessary formulations, which solve static electromagnetic fields for elements of four square (and curved) sides, and the technique used in the determination of non-linear media reluctivity. In Chapter V, the time variable of electromagnetic fields is treated, making possible the solution of problems of this nature, such as transient phenomena and sinusoidal steady-state. Computer aspects of the work are shown in Chapter VI, presenting resolution routines of the equation system fitted to the problem, and numeric integration routines described by first and second order differential equations, which depend on the time. Some techniques showed in those previous Chapters are specifically used in Chapter VII to obtain the magnetic field distribution, which analyses transformer performance during transients. The coherence of the method is also confirmed.
|
173 |
Condições de fronteiras de absorção no método FDTD. / Absorbing boundaries conditions in the FDTD method.Alexandre Magno Milagre 19 July 2007 (has links)
Em muitas simulações eletromagnéticas utilizando o método FDTD, é desejado que os campos radiados pelas estruturas em análise sejam transmitidos para fora do domínio computacional. Infelizmente isto não é possível de ser realizado através do método FDTD em sua forma original. Para resolver este problema, deve-se implementar, nas superfícies limítrofes dos domínios computacionais, condições especiais denominadas na literatura técnica de Condições de Fronteiras de Absorção, ou, em inglês, \"Absorbing Boundary Conditions\" (ABC´s). Essas Condições de Fronteiras de Absorção impedem que os campos radiados sejam refletidos nas superfícies limítrofes dos domínios computacionais, retornando para o interior do domínio e interferindo no resultado final das simulações. Não existe uma técnica de absorção ideal, ou seja, que elimine totalmente a reflexão. As técnicas atualmente existentes possuem vantagens e desvantagens, podendo ser mais ou menos eficientes, o que faz com que esse tema ainda seja motivo de extensivos estudos. O objetivo deste trabalho consiste no estudo, implementação e comparação de Condições de Fronteiras de Absorção e na indicação de uma possível melhoria nessa área. São realizadas simulações em domínios bidimensionais e tridimensionais para se determinar vantagens e desvantagens de cada técnica de absorção. A análise dos resultados das simulações está focalizada no grau de atenuação que as ABCs possuem e na carga computacional despendidas por elas. Este trabalho é concluído com simulações empregando as condições de fronteiras analisadas para três estruturas clássicas. As vantagens e desvantagens de cada ABC são apresentadas e uma melhoria proposta na técnica de Auto Teleportação de Campos, ou, em inglês, \"Self Teleportation of Fields\" é validada. As estruturas analisadas são uma microlinha de transmissão, um filtro planar e um cilindro metálico iluminado por uma onda plana uniforme. / In many electromagnetic computational simulations using the FDTD method, it is desired that the electromagnetic fields radiated by the structures under analysis can be transmitted outwards the computational domain. Unfortunately, this is impossible to be done by the FDTD method in its original form. To mitigate this problem, one must apply special conditions to the computational domain boundaries, known in the technical literature as Absorbing Boundary Conditions (ABCs) These Absorbing Boundaries Conditions prevent the radiated fields to be reflected by boundaries back into the computational domain. Without them, these fields would interfere with the final simulation results. However, there is no ideal technique that completely eliminates the reflections. The existing techniques have advantages and disadvantages, which make them more or less efficient, still making this subject a theme of extensive studies. This work is aimed at studying, implementing and comparing these Absorbing Boundary Conditions and at indicating a possible improvement in this field. Simulations in bi-dimensional and three-dimensional domains were made to evaluate advantages and disadvantages of each absorption technique. The analysis of the simulation results was focused in the attenuation degree of the ABCs and their computational burden. The work is concluded with simulations using the analyzed ABCs for three classic structures. The advantages and disadvantages of each ABC are presented and a proposed improvement on the \"Self Teleportation of Fields\" technique is validated. The analyzed structures are a microstrip line, a planar filter and a metallic cylinder illuminated by a uniform plane wave.
|
174 |
Análise temporal da antena espiral equiangular filamentar. / Transient analysis of the thin-wire equiangular spiral antenna.Renata Valerio de Freitas 19 December 2016 (has links)
Por conta da liberação de uma nova faixa de espectro as aplicações que utilizam transmissão em banda ultralarga se expandiram. Por conta disso, várias formas de transmissão pulsada ganharam destaque. Contudo, o projeto e estudo de antenas até então era majoritariamente feito em banda estreita e regime permanente senoidal. Além disso, para transmissão pulsada, a resposta impulsiva da antena passa a ser mais necessária do que sua resposta em banda estreita. Por isso, o objetivo desse estudo foi explorar o que ocorre com pulsos estreitos se propagando em uma antena de forma a se obter uma aproximação da resposta impulsiva de antenas. Mais especificamente, foi obtido um modelo analítico que explicita a relação entre a geometria e o funcionamento da antena. Através do estudo da espiral equiangular foi possível encontrar o decaimento do pulso de corrente ao longo da linha como também o campo radiado de forma quantitativa. Tal resultado, assim como os procedimentos para sua obtenção, poderá ser utilizado para outras antena filamentares. / The applications for Ultra Wide Band have grown since the new regulation allowed the use of a new large frequency band. Since then, systems for pulsed transmission entered the spotlight. However, the antenna\'s project and study were in big part done in narrowband and sinusoidal steady-state. Besides, the impulse response is of much more interest for these systems than the frequency response. For this reason, the main goal of this work is to explore how current pulses propagate on the antenna to obtain an approximate impulse response. Moreover, an analytical model that unveils the relation between the antenna geometry and its current decay is presented. Through the study of the equiangular spiral it is possible to find the pulse decay as a function of the line length and the radiated field in a quantitative fashion. This result as well as the methods used to obtain it can be used for other antennas.
|
175 |
Numerical computation of core losses in permanent magnet machinesLi, Zhou, University of Western Sydney, Nepean, School of Mechatronic, Computer and Electrical Engineering January 2000 (has links)
This thesis presents a study on core loss calculations in rotating electrical machines. The basic concepts concerning magnetic moments, ferromagnetism, magnetic domains and magnetic hysteresis are introduced. The three-term models for alternating and rotational core losses in electrical steel sheets are presented. Several core loss measurement techniques are reviewed and an experiment is carried out to measure the total core losses in an electrical sheet steel sample under alternating and rotational magnetic fields of various frequencies and amplitudes. The coefficients in the loss models for alternating and rotational core losses are obtained through curve fitting process. The theory of electromagnetic fields is presented through the Maxwell equations and field scalar equations. A detailed review on core loss models for rotating electrical machines is presented. A rotational core loss model is adopted to calculate the core losses in a PM motor. The total core loss in the PM motor is obtained by summing the element losses using a MATLAB program. An experiment is conducted to measure the total core loss in the PM motor. The calculated total core loss in the PM motor is compared with the experimental results. The calculated total core losses are about 19% lower than the tested results. Various possible causes for this discrepancy are discussed / Master of Engineering (Hons)
|
176 |
A study of the effects of mobile-phone type signals on calcium ion levels with a human leukaemic T cell lineCranfield, Charles G., ccranfield@swin.edu.au January 2001 (has links)
The work presented here outlines experiments done using a novel RF exposure chamber. This device allows biological cells to be exposed to microwave radiation similar to those emitted by mobile telephones, whilst imaging them using a laserscanning confocal microscope. Jurkat E6.1 T lymphocytes in the exposure chamber were kept within �0.5�C of 37�C, allowing for the investigation of possible athermal effects of microwave energies. These cells were loaded with the fluorescent probe Fluo-3 AM, which is specific for calcium ions, and were monitored over two 10minute periods. The first period being a control period, the second being a period where the cells were either exposed to RF energy or sham exposed. Another 5min imaging period was for the positive control,where maximal fluorescence can be achieved by the addition of the ionophore
A23187. 5 different conditions for cell exposure were investigated. Both continuous wave 900MHz and continuous wave 900MHz pulse modulated at 217Hz exposures were carried out on cells that were either unactivated, or those that were activated by the mitogen phytohaemaglutinin (PHA). For these 4 conditions the average Specific
Absorption Rate (SAR) was calculated to be 1.5W/kg. A group of unactivated cells were also exposed to continuous wave 900MHz energy with an average SAR calculation of 7.5W/kg. Results showed that no significant changes in calcium ion levels occurred when averaged fluorescence slopes were compared between RF exposed cells and the
control period. The mean change in slopes exposed/sham period � control period)between cells that were exposed and those sham exposed also showed no significant difference. Following an inference made in the work of Galvanovskis et al. (1999)1 who showed there is a change in the calcium ion oscillation spectrum as a result of 50Hz magnetic fields, a measure of the mean frequencies of all cells was determined using a Fast Fourier Transform (FFT) analysis. The change in the average mean frequencies in cells was then measured for all conditions. Of statistical significance was the change in average mean frequency between the control period and the sham/exposed period between cells that were exposed and those sham exposed, when cells were activated by PHA. The results also showed that there was an overall drop in average mean
frequency as a result of RF exposure. Assuming there is a biological significance to the findings of this thesis, careful analysis of the calcium dynamics of tissue samples and cell types associated with RF exposure from mobile phones would need to be carried out to determine what they are. This was unfortunately beyond the scope of the present study.
|
177 |
Corrélation entre la qualité du champ magnétique et les composants mécaniques des aimants dipolaires du Large Hadron ColliderBellesia, Boris 15 December 2006 (has links) (PDF)
La production des dipôles supraconducteurs de la machine LHC du CERN est terminée en automne 2006. Les aimants fonctionnent à la température cryogénique de 1.9 K et doivent un champ magnétique très uniforme permettant de conduire les protons dans la machine. Le but a été la découverte de défauts de production et d'assemblage qui peuvent limiter les performances des aimants. Dans le travail de thèse les effets de la variation de la géométrie des composantes mécaniques comme les câbles supraconducteurs, les cales et les colliers de soutien des bobines sur l'uniformité du champ magnétique ont été étudiés. Une méthode pratique pour identifier et corriger les problèmes d'usinage a été développée et utilisée dans la phase de production.
|
178 |
Etude des risques de défaillances d'un réseau de télécommunications soumis aux effets directs ou indirects de la foudreRibeiro, José 07 December 2005 (has links) (PDF)
La foudre par ses effets directs ou indirects peut engendrer des dégâts importants dans un réseau de télécommunications. Dans cette thèse, nous étudions comment aborder la modélisation des mécanismes de couplage de la foudre lors d'un impact au sol ou encore sur une structure constituée d'un pylône et d'un bâtiment de télécommunications. Pour cela, l'étude des phénomènes de couplage entre une décharge atmosphérique et un réseau de câbles est effectuée à l'aide d'une approche topologique basée sur la Théorie des Lignes de Transmission (TLT). La modélisation de couplage de la foudre sur une structure métallique est effectuée dans un premier temps à l'aide d'une méthode approchée à partir de modèles basés sur la TLT puis rigoureusement à l'aide du formalisme des antennes (Méthode FDTD). Cependant, notre objectif étant de prendre en compte l'ensemble des phénomènes physiques, le développement de nouveaux modèles, notamment le formalisme des fils minces en milieu dispersif est détaillé
|
179 |
Etude des systèmes RFID opérants en rétrodiffusion modulée ultra large bandeGuidi, Francesco 15 May 2013 (has links) (PDF)
Depuis quelques années le nouveau paradigme d'internet des objets, qui se traduit par la connexion des objets de la vie quotidienne à internet grâce à des dispositifs électroniques intégrés, est devenu plus qu'un simple concept et a commencé à entrer dans la réalité. Il en est ainsi des systèmes d'identification par radiofréquence (RFID), qui font partie des technologies disponibles. Lorsque le coût et la taille des tags deviennent des exigences prépondérantes, l'adoption de tags (semi-)passifs fondés sur la modulation d'un signal rétrodiffusé représente une solution attractive. En outre, l'utilisation de techniques ULB apporte des avantages propres à favoriser le remplacement d'une partie des systèmes RFID actuels qui souffrent de certains défauts tels qu'une trop forte consommation ou une faible robustesse en présence d'interférence. La thèse de doctorat se place dans ce contexte: elle a pour objectif l'étude des systèmes ULB RFID semi-passifs et se situe dans le cadre du projet européen SELECT, qui vise à développer et à évaluer un tel système. La prise de conscience qu'il était fondamental de comprendre les mécanismes électromagnétiques intrinsèques à la communication lecteur-tag, préalablement à la conception du système, s'est traduite par la mise en oeuvre d'une collaboration franco-italienne dans le cadre d'une cotutelle de thèse. C'est donc au départ autour d'une analyse fine et d'une modélisation des aspects antennaires et du canal radio entre le lecteur et le tag que la 1re partie du travail s'est construite. La 2nde partie a exploité ces travaux pour l'élaboration des schémas de modulation et de codage du lecteur et du tag pour les systèmes semi-passifs.
|
180 |
Magnetfält alstrade kring nätstationer i samband med lokaldistribution av elkraft : Magnetic fields generated by electrical substations during distribution of electric powerStrömberg, Fredrik January 2012 (has links)
Abstract: This report covers primarily the work of documenting electromagnetic fields generated by one of the later parts in the electrical power distribution chain: The electrical substation, wherein 10 kV is transformed to 400 V for use by private consumers. Thus it is one of the most widespread and frequently occurring parts in the Swedish power grid and of particular interest, as electrical substations are found everywhere in populated areas, often in close vicinity to people and animals. The report deals with a number of formulated questions and/or hypothesis’ stated at the onset of the work undertaken, theory that is relevant for the topics the report covers, the details of the field work undertaken and the following analysis of the readings, which in term provide answers for the questions stated in the beginning. It also covers what is the currently known short term and long term risks associated with electromagnetic fields in the power frequent spectrum and of varying intensity in the vicinity of humans. The analysis also provides recommendations and identifies several points to carefully consider when planning for new installations or replacements of some parts of existing installations. For enhanced reading comprehension there is, aside from sections with pictures and attached explanatory texts and templates, several graphs, one-line diagram and maps of the power grid among the appendixes to the rapport.
|
Page generated in 0.0427 seconds