This report presents a model to determine the solar Extreme UltraViolet (EUV) intensity and the ion flux in the vicinity of Saturn, by using measurements from the Langmuir probe, a plasma investigation instrument, of the Cassini satellite. The model is based on in situ measurements and does therefore provide an improved estimation of the wanted parameters compared to previously used calculations based only on the EUV flux measured near Earth. The solar EUV and ion flux were determined by analysing and processing the current measurements from the Cassini Langmuir probe in several steps. Initially the time intervals where the measured current were expected to be due only to the photoelectron current was extracted. The photoelectron current is the part of the measured probe current that is only due to electrons ejected from the probe by photons coming from the Sun. The measurements showed a periodic behaviour which was concluded to be due to the attitude of the satellite. This interfering effect was corrected for and the data was then plotted against an EUV index, estimated from a traditionally used proxy of the EUV flux near Earth; the F10.7 solar radio flux index. In agreement with the theory of the photoelectric effect a linear relationship between the EUV flux and the photoelectron current mph was expected. A least square linear fit to the extracted photoelectron current data provided the relation, for the Langmuir probe on Cassini, in the form of the equation mph=0.1842EUV+0.2405, where mph is the photoelectron current in nA and EUV is the EUV index in W/Hzm^2. The derived equation is the result of the study, showing how to estimate the solar EUV flux using the Langmuir probe current measurements. This result was used to derive the other wanted parameter, the ion flux. The derivation was done by calculating the photoelectron current mph at all time and subtracting the result from the total current. The retrieved difference gives the magnitude of the ion current for every measurement.

Thesis (M.S.)--Oregon State University, 2008. / Printout. Includes bibliographical references (leaves 77-83). Also available on the World Wide Web.

Th.--Méd.--Nancy 1, 1984. N°: 142.

Made available in DSpace on 2014-10-09T12:32:26Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:10:14Z (GMT). No. of bitstreams: 1 03179.pdf: 2430358 bytes, checksum: 41a2d3d65c5815ac7b2215aa1300d72a (MD5) / Dissertacao(Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Made available in DSpace on 2014-10-09T12:32:26Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:10:14Z (GMT). No. of bitstreams: 1 03179.pdf: 2430358 bytes, checksum: 41a2d3d65c5815ac7b2215aa1300d72a (MD5) / Dissertacao(Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Lately, various programming frameworks has been developed for developing web applications. These frameworks focus on increasing the user experience by performance improvements such as faster render times and response times. One of these frameworks are React, which has introduced a completely new architectural pattern for both managing the state and data flow of an application. React also offers support for native application development and makes server-side rendering possible. Something that is difficult to accomplish with an application developed with Angular 1.5, which is used by the company Dewire today. The aim of this thesis was to compare React with an existing Angular project, in order to determine whether React could be a potential replacement for Angular. To gain knowledge about the subject, a theoretical study of web- based sources has been made. While the practical part has been to rebuild a web application with React together with the architecture Flux, which is based on a view from the Angular project. The implementation process was repeated until the view was completed and a desired data flow, as in the Angular application, was reached. The resulting React application was later compared with the Angular application developed by the company, where the outcome of the comparison showed that the React performed better than Angular in all tests. In conclusion, due to the timeframe of the project, only the most important parts of the Angular project were implemented in order to carry out the measurements that were of interest to the company. By recreating most of the functionality, or the entire Angular application, more interesting comparisons could have been done. / På senare tid har det utvecklats olika programmeringsramverk för att utveckla webbapplikationer. Dessa ramverk har fokus på att öka användarupplevelsen ytterligare med hjälp av prestandaförbättringar i form av snabbare renderings- och responstider. Ett av dessa ramverk är React, som har introducerat ett helt nytt arkitekturmönster för att både hantera applikationens tillstånd och dataflöde. React erbjuder även stöd för native applikationsutveckling och möjliggör att på ett enkelt sätt rendera från server-sidan. Något som är svårt att åstadkomma med en applikation utvecklad med Angular 1.5, som används av företaget Dewire idag. Syftet med detta examensarbete har varit att jämföra React med ett befintligt Angular projekt, för att kunna avgöra om React kan vara en potentiell ersättare till Angular. För att få kunskaper inom ämnet har en teoretisk undersökning med hjälp av webbaserade källor gjorts. Medan den praktiska delen har varit att återskapa en webbapplikation, med ramverket React tillsammans med arkitekturen Flux, som är baserad på en vy från Angular projektet. Implementeringsprocessen genomfördes iterativt tills denna vy var uppbyggd och att ett önskvärt dataflöde såsom i Angular-applikationen var uppnått. Resultatet av React-applikationen jämfördes sedan med företagets Angular-applikation, där utfallet av jämförelsen visade att React presterade bättre än Angular i samtliga tester. Som slutsats, på grund av projektets tidsram, implementerades endast de viktigaste delarna av Angular projektet för att genomföra de mätningar som var intressanta för företaget. Genom att återskapa större delen av funktionaliteten, alternativt hela Angular-applikationen, hade fler intressanta jämförelser kunnat utföras.

An interesting discovery in biology is that most genes in an organism are dispensable. That means these genes have minor effects on survival of the organism in standard laboratory conditions. One explanation of this discovery is that some genes play important roles in specific conditions and are essential genes under those conditions. E. coli is a model organism, which is widely used. It can adapt to many stress conditions, including temperature, pH, osmotic, antibiotic, etc. Underlying mechanisms and associated genes of each stress condition responses are usually different. In our analysis, we combined protein abundance data and mutant conditional fitness data into E. coli constraint-based metabolic models to study conditionally essential metabolic genes under temperature and pH stress conditions. Flux Balance Analysis was employed as the modeling method to analysis these data. We discovered lists of metabolic genes, which are E. coli dispensable genes, but conditionally essential under some stress conditions. Among these conditionally essential genes, atpA in low pH stress and nhaA in high pH stress found experimental evidences from previous studies. Our study provides new conditionally essential gene candidates for biologists to explore stress condition mechanisms.

With the increase of population every year, fresh water scarcity has rapidly increased and it is reaching a risky level, particularly in Africa and the Middle East. Desalination of seawater is an essential process for fresh water generation. One of the methods for desalination is membrane distillation (MD). MD process separates an aqueous liquid feed across a porous hydrophobic membrane to produce pure water via evaporation. Polyvinlidene fluoride (PVDF) membranes reinforced with a polyester fabric were fabricated as potential candidates for MD. Non-solvent induced phase separation coupled with steam treatment was used to prepare the PVDF membranes. A portion of the prepared membrane was coated with Teflon (AF2400) to increase its hydrophobicity. In the first study, the fabricated membranes were characterized using scanning electron microscopy and other techniques, and they were evaluated using direct contact MD (DCMD). The fabricated membranes showed a porous sponge-like structure with some macrovoids. The macrovoid formation and the spongy structure in the membrane cross-sections contributed significantly to a high permeate flux as they provide a large space for vapor water transport. The modified PVDF membranes with steaming and coating exhibited a permeate flux of around 40 L/h m2 (i.e. 27-30% increase to the control PVDF membrane) at temperatures of 60 °C (feed) and 20 °C (permeate). This increase in the permeate flux for the modified membranes was mainly attributed to its larger pore size on the bottom surface. In the second study, the control PVDF membrane was tested in two different module designs (i.e. semi-circular pipe and rectangular duct module designs). The semi-circular module design (turbulent regime) exhibited a higher permeate flux, 3-fold higher than that of the rectangular duct module design (laminar regime) at feed temperature of 60 °C. Furthermore, a heat energy balance was performed for each module design to determine the temperature polarization coefficients (TPC). The turbulent module design showed higher TPC (0.5-0.58) than the laminar module (0.1-0.14) (i.e. a poor module design). This indicates that the effect of temperature polarization on the laminar flow was significant, which is below the reported TPC range of 0.4-0.70.

No description available.

No description available.