Thesis (Ph. D.)--University of Texas at Austin, 2006. / Vita. Includes bibliographical references.

Ti: sapphire femtosecond laser ablation of dielectrics (fused silica and BK7 glass) and metals (Cu, Fe, Al) is presented. Results of laser -induced breakdown experiments in fused silica and BK7 glass employing 130 fs -1.7 ps, 790 nm laser pulses are reported. The fluence ablation threshold does not follow the scaling of 4>th ~ ^/2 when pulses are shorter than 1 ps. Single-shot and multi-shot (130 fs pulse) ablation of selected materials are investigated with laser wavelengths of 395 nm, 790 nm, and 1300 nm. The ablation threshold is almost independent of the laser wavelength. The surface morphologies in metals after ultrashort pulse ablation are very different from dielectrics and semiconductors. The roughness of the ablated surface depends on the thermal properties of the metal target. The preliminary TEM result from Cu single crystal that was irradiated by single laser pulses shows few defects in the center region of the ablated crater. Single-shot ablation of single-crystal Fe induces much different surface features than on selected samples of poly-crystal Fe metal. / Thesis / Master of Engineering (ME)

Current research in the field of nano-electronics is directed towards device miniaturization in order to find ways to increase the speed of electronic devices. The work presented in this dissertation is on the electronic transport properties of single walled carbon nanotube (SWNT) ropes synthesized by laser ablation. The measurements were performed on devices with different geometries; namely SWNT mats, metal incorporated (aligned individual and bundled) SWNTs and lastly on aligned pure SWNTs from low temperatures up to room temperature. The work was performed so as to gain an understanding on how best to utilize SWNTs in the semiconductor industry towards miniaturization. Such an understanding would ultimately highlight if SWNTs can be considered as a viable alternative to the current silicon-based technology, which seems to be approaching its physical limit. For a mat of SWNTs, 3D-Variable range hopping is the principal conduction mechanism from 2 K – 300 K. The magneto-resistance was found to be predominantly negative with a parabolic nature which converts to a linear nature as the temperature is increased. The negative MR is a consequence of quantum interference and the positive upturn is attributed to wave function shrinkage at low temperatures as described by the Efros-Shklovskii model. The hopping ranges of the electrons for a SWNT mat increases as the temperature decreases due to manifestation of quantum effects and reduced scattering. It was also found that metal incorporation does not alter the properties of the SWNT significantly. SWNT ropes aligned by di-electrophoresis across a 1 micron gap between gold micro-electrodes, exhibit Tomonaga-Luttinger liquid (TLL) like behaviour, within the 80 K – 300 K temperature range. The effects of confinement and electron-electron interaction unique to one dimension were identified in electronic transport as a non-universal power law dependence of the differential conductance on temperature and source-drain voltage. Ballistic conductance at room temperature was confirmed from the high frequency transport of the SWNT devices. The complex impedance showed some oscillatory behaviour in the frequency range 6 to 30 GHz, as has been predicted theoretically in the Tomonaga-Luttinger Liquid model. The observation of Luttinger Liquid behaviour demonstrates the outstanding nature of these one-dimensional molecular systems. In these devices the charging Coulomb energy of a single particle played a critical role in the overall device performance. This study can be used to understand the nature of dynamics of plasmons which are the charge carriers in a TLL system and how Coulomb interactions can be used to design highly tuneable systems for fabrication of single molecule devices. The incorporation of metal onto individual SWNT ropes does not alter its electronic properties significantly but the properties of the bundled metal incorporated SWNT ropes are altered. This study has found that under optimized conditions SWNTs might be a viable option for incorporation in nano electronics devices. Individual SWNT ropes promise better devices compared to SWNT mats and further work should be done on individual SWNTs.

A research report submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, in fulfillment of the requirements for the degree of Master of Science. Johannesburg, 2015. / In this thesis electron transport properties of silicon nanowires are studied. The devices are synthesized using a laser ablation technique. The catalysts used in the synthesis are nickel nanoparticles. The silicon nanowires are characterized by scanning electron microscopy, transmission electron microscopy, atomic force microscopy and Raman spectroscopy. Dielectrophoresis is used to align and contact nanowires across two electrodes to create two-terminal devices. In addition four-terminal devices are fabricated using PMMA lift-off based electron beam lithography. Electron transport properties of the fabricated devices have been studied using dc measurement techniques. Resistance of the silicon nanowires has been measured as a function of temperature and magnetic field. These measurements have been accomplished using a Cryogenics system at low temperature, and high magnetic field. Temperature dependent studies reveal that Arrhenius type thermally activated transport behavior is the dominant transport mechanism in measurements at zero magnetic field. Magnetic field dependent measurements show a weak positive linear magnetoresistance. There are also strong oscillations in magnetoresistance curves. The temperature and field independence of the oscillations has been attributed to quantum interference effects.

No description available.

none

Femtosecond laser microsurgery has emerged as a remarkable technique for precise ablation of biological systems with minimal damage to their surrounding tissues. The combination of this technique with nonlinear optical imaging provides a means of microscopic visualization to guide such surgery in situ. A clinical endoscope capable of image-guided femtosecond laser microsurgery will provide physicians a means for cellular-level microsurgery with the highest precision. This dissertation focuses the development of a miniaturized fiber-coupled probe for image-guided microsurgery, towards future realization as a clinical endoscope. The first part of the dissertation describes the development of an 18-mm diameter probe. This development includes delivery of femtosecond laser pulses with pulse energy in excess of 1 µJ through air-core photonic bandgap fiber, laser beam scanning by a microelectromechanical system scanning mirror, and development of a new image reconstruction methodology for extracting increased temporal information during Lissajous beam scanning. During testing, the 18-mm probe compares favorably with the state-of-the-art as a microscopic imaging tool and we present the first known demonstration of cellular femtosecond laser microsurgery through an optical fiber. The second part of the dissertation explores further refinement of the design into a streamlined package with 9.6 mm diameter and improved imaging resolution. Study of the optical performance through analytical and computer-aided optical design indicates that simple custom lenses can be designed that require only commercial-grade manufacturing tolerances while still producing a fully aberration-corrected microsurgical endoscope. With the 9.6-mm probe, we demonstrate nonlinear optical imaging, including tissue imaging of intrinsic signals from collagen, using average laser powers 2-3× lower than the current state-of-the-art. We also demonstrate the use of the 9.6-mm probe in conjunction with gold nanoparticles for enhanced imaging and microsurgery through plasmonics. Finally, in the third part of this dissertation, we detail bench-top development of a new clinical application for combined femtosecond laser microsurgery and nonlinear optical imaging: the treatment of scarred vocal folds. We show the utility of femtosecond laser microsurgery for creating sub-epithelial voids in vocal fold tissue that can be useful for enhancing localization of injectable biomaterial treatments. We demonstrate that a single compact fiber laser system can be utilized for both microsurgery and imaging. Furthermore, the proposed clinical technique is shown to be achievable with parameters (e.g., pulse energy, focused spot size) that were found to be attainable with fiber-coupled probes while still achieving ablation speeds practical for clinical use. / text

No description available.

Thesis (M.S.)--University of Nevada, Reno, 2007. / "December 2007." Includes bibliographical references (leaves 56-58). Online version available on the World Wide Web.

Thesis (Ph. D. in Interdisciplinary Materials Sciences)--Vanderbilt University, Dec. 2008. / Title from title screen. Includes bibliographical references.