Spelling suggestions: "subject:"[een] POLLUTION"" "subject:"[enn] POLLUTION""
241 |
Microbial fouling of drip irrigation equipment in wastewater reuse systemsTaylor, Huw David January 1992 (has links)
This study set out to investigate the processes that lead to emitter fouling in wastewater reuse systems. The susceptibilities of several emitter designs to clogging were compared and the role of phytoplankton in the clogging process and in the development of algal mats was investigated. Emitter design was found to be an important factor controlling the degree of clogging. Those designs that operated most efficiently used a long-path narrow labyrinth to control emitter output and encourage turbulent flow. Simpler designs that controlled flow by small sponge inserts or by stitched tubing were found to be unsuitable for use with treated wastewaters. The most common cause of clogging was found to be sand particles in the size range 360 urn to 1080 urn, trapped within the narrow channels of emitters. The sand contaminated the entire irrigation system from the potable water supply in July 1987, before a screen filter was installed in the water supply line. Emitter clogging under these circumstances was a problem, to varying degrees, for all emitter designs and for all water qualities. Emitters supplied with WSP effluent generally clogged to a greater degree than those supplied with potable water and the principal cause of clogging was shown to be sand particles. However, no statistically significant difference was recorded in the discharge characteristics of the most efficient emitter design between different water qualities. Thorough cleaning of the irrigation laterals in 1987 and replacement of emitters in 1988 failed to eradicate the sand contamination problem. Examination of clogged emitters by electron microscopy showed that organic material encased the sand particles in clogged emitters from laterals supplied with WSP effluent, thereby sealing the water channel. This mass was shown to be comprised of dead microalgae and invertebrate animals such as Daphnia spp. on which bacteria developed. Microalgae did not multiply in the dark environment of the emitter interiors. External algal mats were detected on less than 5 percent all emitters supplied with WSP effluent and were absent on all emitters supplied with potable water. Emitter C, which was the design that presented the largest wetted surface to sunlight, developed the greatest number of mats and covering these emitters with black polythene prevented mat development. The mats were shown to comprise of predominantly filamentous cyanobacteria (Oscil/atoria spp. and Lyngbya spp.) and filamentous green algae (Microcystis spp.). Although these organisms were also detected on the walls of the maturation pond, they were not detected in grab samples of pond effluent which contained predominantly planktonic algal genera such as Euglena spp. and Chlorella spp. Short decaying filaments of Oscillatoria spp. were, however, detected within the irrigation laterals and on the surfaces of sand particles within clogged emitters and no degree of filtration would guarantee their complete removal from the pond effluent. It was hypothesised that their development on the outer surfaces of emitters was a result of colonization of a well-illuminated, wet and nutrient-rich environment and that the source of the inoculum was as likely to be the soil as to be the maturation pond. Studies of greenhouse irrigation systems in the UK revealed that algal mats were a consequence of applying inorganic nutrients to the crop in the irrigation water: their development can be prevented in greenhouses by chlorination of the water supply. It was concluded that clogging results from a combination of physical, chemical and biological factors. Sand particles can be efficiently removed from the water supply by incorporating a simple screen filter, with a mesh size of at least 120, that allows microalgae to pass through the system to the soil. Clogging by sand particles was exacerbated by chemical precipitation of calcium carbonate and by the development of a organic material over the surface of the sand particles in emitters supplied with pond effluent. Biological growth alone was not shown to cause emitter clogging. It was also shown that the development of algal mats over the outer surface of emitters supplied with pond effluent were not a result of an accumulation of pond algae at this point but represented an opportunistic colonization of a well illuminated nutrient-rich environment by microorganisms from the atmosphere and/or soil. Algal mats had no adverse effect on the operation of emitters in WSP reuse irrigation.
|
242 |
Predicting the trajectories of hazardous discharges of dense gasesShaver, Elizabeth M. 08 1900 (has links)
No description available.
|
243 |
The sea shore contamination of the Lebanese coast /Kortbaoui, Ziad S. January 1997 (has links)
Sea water samples were collected from different sampling stations along the Lebanese coast in the summer of 1994. Chemical, biological and physical analysis were conducted to assess the recreational water quality in Lebanon. / Some 125 samples were then analyzed for the presence of Cadmium and Mercury by atomic absorption spectrophotometry. Cadmium content, holding a mean 0.77 $ mu$g/L, was generally low for most areas with only a few elevated readings in Tripoli (1.89 $ mu$g/L), Checca (1.83 $ mu$g/L), Kaslik (0.79 $ mu$g/L), Beirut (1.19 $ mu$g/L) and Ramlet Al-Bayda (1.77 $ mu$g/L). Mercury content, holding a mean value of 0.06 mg/Kg (wet weight), was below the accepted tolerance limit of 0.5 mg/Kg for all sampling sites. / Some 128 samples were then analyzed for fecal coliforms (Escherichia coli and Streptococcus feacalis). Approximately, 50% of the sampling stations showed satisfactory results (less than 100 colonies/100 ml). High counts of fecal coliforms, over 500 colonies/100 ml, collected at Dora, Ramlet Al-Bayda and Antelias, reveal poor sea water quality and a public health hazards to swimmers and fishermen. / Some 36 samples were collected and analyzed for dissolved oxygen (DO), pH, salinity and temperature. For all sites sampled, DO averaged 4.03 mg/L, pH averaged 7.97, salinity averaged 38.77 ppt and temperature averaged 27.9$ sp circ$C. / The degree of pollution was found to be related to population density, industrial and human activity, continental runoffs and hydrological and meteorological conditions.
|
244 |
Studies of the post-depositional cycle of mercury in a marine and a lacustrine environment : response during early diagenesisPapadimitriou, E. January 1995 (has links)
No description available.
|
245 |
Factors controlling the solubility of trace metals in rainwatersKeyse, Sarah January 1996 (has links)
No description available.
|
246 |
Aspects of nitrogen dynamics and the functioning of river marginal wetlandsBaker, Christopher John January 1994 (has links)
No description available.
|
247 |
Groundwater recharge and pesticide leaching in a Triassic sandstone aquifer in South-West EnglandFrey, Andreas January 1999 (has links)
No description available.
|
248 |
A numerical study of flow and contaminant transport in fractured porous mediaPollard, Adam Spencer January 1998 (has links)
No description available.
|
249 |
Self-tuning PI control of industrial wastewater treatment process and simultaneous on-line estimations of oxygen uptake and transfer ratesCakici, Avni January 1992 (has links)
No description available.
|
250 |
Field assessment of the environment impact of potential pollutants on land irrigated with leachate generated from municipal solid wastesRuegg, Josephine January 1993 (has links)
No description available.
|
Page generated in 0.0549 seconds