This work deals with the creation of a program for calculating the tensile losses of an in-dustrial boiler. The work is divided into four parts. The first part of the thesis deals with a theoretical introduction to the issue of pressure losses. The second part deals with all equations and procedures by which the program was created, as well as the limitations and conditions of using a given type of equation. The third part consists of a sample calculation of pressure loss-es of a real boiler. Furthermore, in the third part, the correctness of the program function is checked, where the measured losses on the real device were compared with the losses calcu-lated by the program. The fourth part deals with the influence of the boiler's parameters on its pressure losses, where the individual losses were graphically represented and compared to determine the sensitivity analysis. The output of this work is a functional program that has been optimized for ease of use and requires almost no knowledge of the user.

This work is focused on computational modelling of mixing fluids in pipeline with static mixers. Main objective is to analyze several selected static mixers in a particular industrial application, namely dosing of the aluminium sulphate solution in the clarification process for potable water treatment. The analysis focuses on the degree of mixedness and pressure loss of individual mixers. Further, the aim of this work is to process the search of available types of static mixers. The benefit of this work is at least an effort to motivate the reader to deeper understanding of the mixing fluids, especially by static mixers.

Goal of this thesis is to verify functions of hydraulic manifolds from new supplier, measure characteristics of pressure loss relative to flow rate and for proportional blocks also characteristics of flow rate relative to control voltage at constant inlet pressure. Verification will be carried out with proportional manifolds and on/off manifolds with different failure functions.

This diploma thesis deals with a portable working place for automated measuring of pressure characteristic dependence on ventilator air flow and dependence of pressure loss on air flow for electrical machines and other devices. The goal of this thesis is to design and create the working place with performance validation measure.

This diploma thesis deals with the best solution design for a sludge fitting, especially focusing on the right choice of pumps for the waste water treatment plant in Prostějov. The pumps were selected for a circulation pipeline, which heats up the sludge. Several measurements were carried out in order to determine the statistical evaluation of the properties of the pumped medium. The figures gained were used to calculate pressure losses.The diploma thesis is divided into two parts. The first part provides a theoretical analysis of the problem and the second part presents the results and subsequently the reasoning for the new selection of pumps in order to change the WWTP technology from the mesophilic to the thermophilic sludge digestion. The test records describing the testing of the individual samples of the pumped sludge are attached.

The aim of this thesis is to consider the operation of dredge pump and design new technology of slag removal including return on investment calculation. The operation optimization itself was preceded by analysis of present technology, data collection, calculation of pressure losses and pinpointing the causes of their origin. Subsequently, the measures to elimination of losses were deduced and these measures were implemented into optimization of dredge pump operation itself. The return on investment into the new technology of slag removal is calculated in the last chapter, considering its feasibility in the heating plant.

This thesis deals with reconstruction of the heating system of the house after insulation and window replacement. First, the work deals with the description of the building, where are solved the structural elements and building construction and the original heating system is described. Another part deals with the selection of appropriate thermal insulation of external walls and roofs. The work deals with the detailed calculation of the nominal heat performance including domestic water heating. Subsequently, it is focused on solutions of suitable reconstruction of the heating system, which deals with the heat source, hot water circulation, radiators, temperature gradient, heating system security and temperature regulation of water in the domestic water storage heater. In the annexes are inserted construction drawings and the drawings of heating system. Drawings of heating systems are processed for the original condition. For the condition after insulation drawings are already processed with the proposed renovation of the heating system.

The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.

This diploma thesis describes the detailed design of heating and hot water heating for a family quest-house. At first the reader is introduced to the designed building, its design and construction elements. The thesis presents the calculation procedure and design of the heating system. This consists of designing radiators, the heat source, the circulating pumps, regulations of the heating system and the design of its security elements. The thesis also describes the design of the heat exchanger for hot water and security. In conclusion, an evaluation of operating costs with the recommended solution for their reduction. The thesis also includes drawing documentation of structural drawings, heating and unrolled schema that is mentioned in the attachment.

This master’s thesis deals with the design of the ventilation and heating system in low-energy single family house. The thesis is divided into three parts. The first part of the thesis provides an overview of the project together with the requirements of the house owner. The options for heating and ventilation in low-energy buildings are also discussed in this part. The second part deals with the design of the ventilation system with heat recovery. The design includes determination of the amount of ventilation air, selection of a suitable ventilation unit and the design of the supply air and return air ductworks. The last part focuses on the heating system. It includes the calculations of the heat loss of the house and design of floor heating. Furthermore, the selection of heat source together with the safety measures is described in this part. Both design parts include the bills of materials, along with the budget and the drawings.