The coverage and energy issues are the fundamental problems which prevent the development of wireless sensor networks. In order to accurately evaluate the monitoring quality (coverage), one needs to model the interactive of sensors, phenomenons and the environment. Furthermore, in collaborative with scheduling algorithm and computer optimization, protocols can improve the overall monitoring quality and prolong the lifetime of network. This thesis is an investigation of coverage problem and its relative applications in the wireless sensor networks. We first discuss the realistic of current boolean sensing model and propose an irregular sensing model used to determine the coverage in the area with obstacles. We then investigate a joint problem of maintaining the monitoring quality and extending the lifetime of network by using scheduling schemes. Since the scheduling problem is NP hard, genetic algorithm and Markov decision process are used to determine an achievable optimal result for the joint problem of coverage-preserving and lifetime-prolong. In order to avoid the cost of centralized or distributed scheduling algorithms, a localized coverage-preserving scheduling algorithm is proposed by exploring the construction process of Voronoi diagram. Besides exploring the coverage characteristic in a static wireless sensor network, we investigate the coverage problem when the mobile elements are introduced into network. We consider the single-hop mobile data gathering problem with the energy efficiency and data freshness concerns in a wireless sensor network where the connectivity cannot be maintained. We first investigate the upper/lower bound of the covering time for a single collector to cover the monitoring area. Through our investigation we show that for a bounded rectangle area a hexagon walk could explore the area more efficiently than a random walk when the edges of area are known. We then propose a virtual force mobile model (VFM) in which the energy consumption for data transmission is modeled as a virtual elastic force and used to guide of mobile collectors to move to optimal positions for energy saving.

In today’s era of the Internet of Things, it is crucial to study the real-time dependencies of the web, its failures and time delays. Today, smart grids, sensible homes, wise water networks, intelligent transportation, infrastructure systems that connect our world over are developing fast. The shared vision of such systems is typically associated with one single conception Internet of Things (IoT), where through the deployment of sensors, the entire physical infrastructure is firmly fastened with information and communication technologies; where intelligent observation and management is achieved via the usage of networked embedded devices. The performance of a real-time control depends not only on the reliability of the hardware and software used but also on the time delay in estimating the output, because of the effects of computing time delay on the control system performance. For a given fixed sampling interval, the delay and loss issues are the consequences of computing time delay. The delay problem occurs when the computing time delay is non-zero but smaller than the sampling interval, while the loss problem occurs when the computing time delay is greater than, or equal to, the sampling interval, i.e., loss of the control output. These two queries are analyzed as a means of evaluating real-time control systems. First, a general analysis of the effects of computing time delay is presented along with necessary conditions for system stability. In this thesis, we will focus on the experimental study of the closed loop control system in the internet of things to determine the cycle time constraints in case of link failure.

There are many works related to wireless sensor networks (WSNs) where authors present new protocols with better or enhanced features, others just compare their performance or present an application, but this work tries to provide a different perspective. Why don¿t we see the network as a whole and split it into groups to give better network performance regardless of the routing protocol? For this reason, in this thesis we demonstrate through simulations that node¿s grouping feature in WSN improves the network¿s behavior. We propose the creation of a group-based architecture, where nodes have the same functionality within the network. Each group has a head node, which defines the area in which the nodes of such group are located. Each node has a unique node identifier (nodeID). First group¿s node makes a group identifier (groupID). New nodes will know their groupID and nodeID of their neighbors. End nodes are, physically, the nodes that define a group. When there is an event on a node, this event is sent to all nodes in its group in order to take an appropriate action. End nodes have connections to other end nodes of neighboring groups and they will be used to send data to other groups or to receive information from other groups and to distribute it within their group. Links between end nodes of different groups are established mainly depending on their position, but if there are multiple possibilities, neighbor nodes could be selected based on their ability ¿, being ¿ a choice parameter taking into account several network and nodes parameters. In order to set group¿s boundaries, we can consider two options, namely: i) limiting the group¿s diameter of a maximum number of hops, and ii) establishing boundaries of covered area. In order to improve the proposed group-based architecture, we add collaboration between groups. A collaborative group-based network gives better performance to the group and to the whole system, thereby avoiding unnecessary message forwarding and additional overheads while saving energy. Grouping nodes also diminishes the average network delay while allowing scaling the network considerably. In order to offer an optimized monitoring process, and in order to offer the best reply in particular environments, group-based collaborative systems are needed. They will simplify the monitoring needs while offering direct control. Finally, we propose a marine application where a variant of this groupbased architecture could be applied and deployed. / García Pineda, M. (2013). A group-based architecture and protocol for wireless sensor networks [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/27599 / TESIS / Premios Extraordinarios de tesis doctorales

Wireless Sensor Networks(WSNs) have gained a lot of attention because of their potential to immerse deeper into people' lives. The applications of WSNs range from small home environment networks to large habitat monitoring. These highly diverse scenarios impose different requirements on WSNs and lead to distinct design and implementation decisions. This thesis presents an optimization framework for WSN design which selects a proper set of protocols and number of nodes before a practical network deployment. A Genetic Algorithm(GA)-based Sensor Network Design Tool(SNDT) is proposed in this work for wireless sensor network design in terms of performance, considering application-specific requirements, deployment constrains and energy characteristics. SNDT relies on offine simulation analysis to help resolve design decisions. A GA is used as the optimization tool of the proposed system and an appropriate fitness function is derived to incorporate many aspects of network performance. The configuration attributes optimized by SNDT comprise the communication protocol selection and the number of nodes deployed in a fixed area. Three specific cases : a periodic-measuring application, an event detection type of application and a tracking-based application are considered to demonstrate and assess how the proposed framework performs. Considering the initial requirements of each case, the solutions provided by SNDT were proven to be favourable in terms of energy consumption, end-to-end delay and loss. The user-defined application requirements were successfully achieved.

Doctor of Philosophy / Department of Biological & Agricultural Engineering / Naiqian Zhang / A two-tier wireless data communication system was developed to remotely monitor sediment concentration in streams in real time. The system used wireless motes and other devices to form a wireless sensor network to acquire data from multiple sensors. The system also used a Stargate, a single-board computer, as a gateway to manage and control data flow and wireless data transfer. The sensor signals were transmitted from an AirCard on the Stargate to an Internet server through the General Packet Radio Service (GPRS) provided by a commercial GSM cellular carrier. Various types of antennas were used to boost the signal level in a radio-hostile environment. Both short- and long-distance wireless data communications were achieved. Power supplies for the motes, Stargate, and AirCard were improved for reliable and robust field applications. The application software was developed using Java, C, nesC, LabView, and SQL to ensure seamless data transfer and enable both on-site and remote monitoring. Remote field tests were carried out at different locations with different GPRS signal strengths and a variety of landscapes. A three-tier wireless sensor network was then developed and deployed at three military installations around the country – Fort Riley in Kansas, Fort Benning in Georgia, and Aberdeen Proving Ground in Maryland - to remotely monitor sediment concentration and movement in real time. Sensor nodes, gateway stations, repeater stations, and central stations were strategically deployed to insure reliable signal transmissions. Radio signal strength was tested to analyze effects of distance, vegetation, and topographical barriers. Omni- and Yagi-directional antennas with different gains were tested to achieve robust, long-range communication in a wireless-hostile environment. Sampling times of sensor nodes within a local sensor network were synchronized at the gateway station. Error detection algorithms were developed to detect errors caused by interference and other impairments of the transmission path. GSM and CDMA cellular modems were used at different locations based on cellular coverage. Data were analyzed to verify the effectiveness and reliability of the three-tier WSN.

Master of Science / Department of Computing and Information Sciences / Gurdip Singh / This work is motivated by the OMG’s CORBA Event Service Specification. CORBA is the acronym for Common Object Request Broker Architecture. In this research, we implemented and analyzed an event service using a model similar to the OMG model for sensor networks applications which are written in nesC programming language, an extension of C programming language. This implementation has been tested on a test bed created using Crossbow’s TelosB motes and Crossbow’s Stargate Netbridge modules as gateways. Event service interface implementations, which reside on the motes, are written in nesC. The data routing part, which is done through Stargate Netbridges, is written in the C language. This document contains experimental results obtained by deploying and running the implementation on the test bed.

An information technology that can combine the physical world and virtual world is desired. The Internet of Things (IoT) is a concept system that uses Radio Frequency Identification (RFID), WSN and barcode scanners to sense and to detect physical objects and events. This information is shared with people on the Internet. With the announcement of the Smarter Planet concept by IBM, the problem of how to share this data was raised. However, the original design of WSN aims to provide environment monitoring and control within a small scale local network. It cannot meet the demands of the IoT because there is a lack of multi-connection functionality with other WSNs and upper level applications. As various standards of WSNs provide information for different purposes, a hybrid system that gives a complete answer by combining all of them could be promising for future IoT applications. This thesis is on the subject of `Federated Sensor Network' design and architectural development for the Internet of Things. A Federated Sensor Network (FSN) is a system that integrates WSNs and the Internet. Currently, methods of integrating WSNs and the Internet can follow one of three main directions: a Front-End Proxy solution, a Gateway solution or a TCP/IP Overlay solution. Architectures based on the ideas from all three directions are presented in this thesis; this forms a comprehensive body of research on possible Federated Sensor Network architecture designs. In addition, a fully compatible technology for the sensor network application, namely the Sensor Model Language (SensorML), has been reviewed and embedded into our FSN systems. The IoT as a new concept is also comprehensively described and the major technical issues discussed. Finally, a case study of the IoT in logistic management for emergency response is given. Proposed FSN architectures based on the Gateway solution are demonstrated through hardware implementation and lab tests. A demonstration of the 6LoWPAN enabled federated sensor network based on the TCP/IP Overlay solution presents a good result for the iNET localization and tracking project. All the tests of the designs have verified feasibility and achieve the target of the IoT concept.

A wireless sensor network is a network consisting of spatially distributed, sometimeautonomous sensors, communicating wirelessly to cooperatively achieve some task. For example, a wireless sensor network may be used for habitat monitoring to ascertain the environment’s temperature, pressure, humidity, etc. In order for a wireless sensor network to provide such data, one needs to ensure there is connectivity between nodes. That is, nodes can communicate to exchange information. To analyze connectivity between sensors, the radio communication range of each sensor, also called the communication footprint, needs to be known. To date, the models used to analyze a sensor’s radio communication footprint have been overly simplistic (i.e., isotropic) and thus yield results not found in practice. Footprints are highly dependent on the deployment environments, which are typically heterogeneous and non-isotropic in structure. In this work, a ‘weak-monotonicity’ (W-M) model is leveraged to represent a footprint’s non-isotropic behavior. The work also considers the heterogeneity of the environment through the use of the log-normal shadowing model. In particular, the usable percentage of the W-M footprint (the area where the power exceeds the receiver threshold) in such environments is considered through analysis and simulation. We then develop an enhanced footprint model which overlays multiple W-M patterns and use this method to represent experimental propagation data. The work also considers the use of graph theory methods to analyze the connectivity of randomly deployed networks in nonhomogeneous, non-isotropic environments.

Emerging body-wearable sensor devices for continuous health monitoring are severely energy constrained and yet required to offer high communication reliability under fluctuating channel conditions. This thesis aims at investigating the opportunities and challenges in the use of dynamic radio transmit power control for prolonging the lifetime of such devices. We first present extensive empirical evidence that the wireless link quality can change rapidly in body area networks, and a fixed transmit power results in either wasted energy (when the link is good) or low reliability (when the link is bad). We then propose a class of schemes feasible for practical implementation that adapt transmit power in real-time based on feedback information from the receiver. We show conservative, balanced, and aggressive adaptations of our scheme that progressively achieve higher energy savings of 14%-30% in exchange for higher potential packet losses (up to 10%). We also provide guidelines on how the parameters can be tuned to achieve the desired trade-off between energy savings and reliability within the chosen operating environment. Finally, we implement and profile our scheme on a MicaZ mote based platform, demonstrating that energy savings are achievable even with imperfect feedback information, and report preliminary results on the ultra-low-power integrated healthcare monitoring platform from our collaborating partner Toumaz Technology. In conclusion, our work shows adaptive radio transmit power control as a low-cost way of extending the battery-life of severely energy constrained body wearable devices, and opens the door to further optimizations customized for specific deployment scenarios.

Recent advances in wireless sensor networks have led to an emergence of many routing protocols. Limited battery capacity of sensor nodes makes energy efficiency a major and challenge problem in wireless sensor networks. Thus, the routing protocols for wireless sensor networks must be energy efficient in order to maximise the network lifetime. In this thesis, we developed a centralised clustering, energy-efficient routing protocol for wireless sensor networks. Our protocol consists of a cluster head selection algorithm, a cluster formation scheme and a routing algorithm for the data transmission between cluster heads and the base station. The cluster head selection algorithm is performed by the base station using global information of the network. This algorithm aiming at choosing cluster heads that ensure both the intra-cluster data transmission and inter-cluster data transmission are energy-efficient. The cluster formation scheme is accomplished by exchanging messages between non-cluster-head nodes and the cluster head to ensure a balanced energy load among cluster heads. The routing algorithm is based on the optimal transmission range for the data transmission between cluster heads and the base station using multi-hop. The performance of our routing protocol is evaluated by comparing with three existing routing protocols on a simulation platform. The simulation results show that our protocol can achieve better performance in terms of energy efficiency and network lifetime. Because of the centralised algorithm and multi-hop routing, there is a small communication overhead and transmission delay when using our protocol. Since our protocol can save energy and prolong network lifetime, it is well suited for applications where energy and network lifetime are the primary considerations and small overhead and time delay can be tolerated. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1456494 / Thesis (M.Eng.Sc.) - University of Adelaide, School of Electrical and Electronic Engineering, 2009