No description available.

No description available.

A number of different aspects of the chemistry of layered double hydroxides and similar materials have been explored in this thesis. The intercalation chemistry of these compounds, in both aqueous and mixed solutions, has been explored to synthesise over forty new hybrid layered materials by ion-exchange and rehydration-reconstruction methods. The host used include both previously-reported layered hydroxide compounds, and novel host materials synthesised by the extension of heterogeneous reactions of solid oxides. The synthesis of these novel materials provides insights into the factors that control the compatibility of the metal ions that may form hydrotalcite-like structures, in addition to providing compounds that may act as the precursors of catalysts and other functional materials. The new intercalation compounds synthesised show interlayer distances ranging from 7.1Å to 23.6Å, and demonstrate a variety of interlayer alignments as determined by powder X ray diffraction, dependent upon both the metallic content and the degree of hydration of the host compound. The anionic contents of the interlayer regions have been further characterised through infra-red spectroscopy, elemental microanalysis, solid-state NMR and thermogravimetric analysis techniques. The mechanism and kinetics of the release of the intercalated anions from the hosts have been studied in situations approximating their real-world applications, and the degree of release quantified by UV/Visible spectroscopy. Both the rates and mechanisms of anion release have been found to be dependent on the anion, the host, the temperature and the solution into which the anions are released; as such, the release timescales of the anions may be fined tuned through modifications of the host materials. In addition, an explanation has been suggested for the observed change in mechanism observed in instances of release in which the host compound is in only partial contact with the release medium.

This work examines various light metal borohydrides, particularly those formed from group II metals, with the aim of understanding their fundamental physical properties and improving their hydrogen storage ability. The structure of a new phase (γ) of Mg(BH₄)₂ is reported and the decomposition is fully characterized in a combination of diffraction and thermogravimetric studies. The bulk properties of γ-Mg(BH₄)₂ are compared to those of an SiO₂ isostructure and probed by various neutron scattering techniques. Negative thermal expansion is observed at low temperatures and the material absorbs up to 1.5 moles of hydrogen gas to form one of the most gravimetrically hydrogen-dense materials ever reported. The structural evolution of Ca(BH₄)₂ under different synthetic conditions and external influences (e.g. temperature) is studied up until the material decomposes. The effects of various additives on group II metal borohydrides are also examined and the influence of each is justified by observing subtle structural changes in the mixed system via in situ synchrotron X-ray powder diffraction and ¹¹B NMR measurements.

Nuclear Magnetic Resonance (NMR) and computational methods increasingly play a predominant and indispensable role in modern chemical research. The insights into the local nuclear environment that NMR can provide is unique information which allows the structural characterization of novel materials, as well as the understanding and explanation of their relevant properties on an atomic scale. Computational methods, on the other hand, can be used to support experimental findings, providing a rigorous theoretical basis. Furthermore, when more complex chemical systems are considered, calculations can prove to be invaluable for the interpretation of experimental data and often allow an otherwise impossible spectral assignment. This thesis presents a series of studies in which NMR spectroscopy, in combination with computational methods, is utilized to investigate a variety of chemical systems both in solution and the solid state. An overview of the thesis and experimental and computational details are given in Chapter 1. In Chapter 2, the quantum mechanical basis necessary for the description of the NMR phenomenon is presented. Chapter 3 explores the main experimental techniques employed routinely for the acquisition of NMR spectra in both solution and the solid state. Chapter 4 describes the main features of density functional theory (DFT) and its implementation in computational methods for the calculation of relevant NMR parameters. Chapter 5 reports an experimental solution-phase NMR study and a parallel computational investigation of the poly(CTFE-co-EVE) fluoropolymer. In Chapter 6, the combination of [superscript(14/15)]N solution-phase NMR techniques and DFT methods for the study of alkylammonium cationic templates used in the synthesis of microporous materials is presented. The characterization of a boroxoaromatic compound in the solid state and the study of its reactivity are described in Chapter 7. In Chapter 8, two experimental NMR methods for the study of the anisotropic chemical shift interaction in the solid state are compared and used to characterize a range of materials. Cross-polarization and nutation of quadrupolar nuclei are computationally investigated under both static and spinning conditions in Chapter 9. A general conclusion and a summary are given in Chapter 10.

The use of solid-state NMR and DFT calculations to study Y₂Sn[subscript(x)]Ti[subscript(2-x)]O₇, Y₂Sn[subscript(x)]Zr[subscript(2-x)]O₇ and Y₂Ti[subscript(x)]Zr[subscript(2-x)]O₇, materials with applications for the safe encapsulation of radioactive actinides is investigated. As a result of cation or anion disorder in these materials, NMR spectra are often complex and difficult to interpret. Therefore, an investigation using a range of NMR active nuclei and measurement of a variety of NMR parameters (isotropic chemical shift, δ[subscript(iso)]; span, Ω and quadrupolar coupling, C[subscript(Q)]) were used to provide a full and detailed picture of each material. The measurement of Ω in these disordered compounds with multiple resonances in the NMR spectra, required the use of 2D CSA-amplified PASS (CAPASS) experiments to enable the separation of each of the spinning sideband manifolds. An experimental assessment of the CAPASS experiment showed that although low ν₁/Ω[subscript(Hz)] ratios (as found in ⁸⁹Y NMR) resulted in distortions in the spectra obtained, a modified fitting procedure could be utilised to compensate for this fact, which allowed the accurate measurement of Ω. Despite the difficulties in acquiring the ⁸⁹Y NMR spectra, they were found to be the most informative of the NMR-active nuclei available. ¹¹⁹Sn NMR spectra, although much easier to acquire than ⁸⁹Y, were more complex and harder to analyse, owing to the overlapping resonances. Therefore, ¹¹⁹Sn NMR could only be used to confirm or support the results obtained using ⁸⁹Y NMR. Although ¹⁷O NMR was found to be useful, a full study could not be implemented due to the lack of ¹⁷O enriched samples; an area where future investigation may prove fruitful. Finally, [superscript(47/49)]Ti and ⁹¹Zr NMR spectra were found to be the most difficult to acquire due to their low receptivities and the quadrupolar broadened lineshapes, and as a result, little additional information was obtained. As a result of this analysis, for the Y₂Sn[subscript(x)]Ti[subscript(2-x)]O₇ pyrochlore solid solution, using primarily ⁸⁹Y δ[subscript(iso)] and Ω, and additionally confirmed with ¹¹⁹Sn δ[subscript(iso)], it was found that the Sn and Ti cations were randomly ordered throughout the B-sites. Additionally, ⁸⁹Y Ω could be used to obtain approximate Y-O[subscript(48f)] and Y-O[subscript(8b)] bond lengths for each type of Y environment. The study of Y₂Sn[subscript(x)]Zr[subscript(2-x)]O₇ using ⁸⁹Y NMR showed that although the end members were single phase, pyrochlore (Y₂Sn₂O₇) or defect fluorite (Y₂Zr₂O₇), the intermediate compositions were mostly two phase mixtures, consisting of an ordered pyrochlore (with an average formula of Y₂Sn₁.₈Zr₀.₂O₇) and a disordered phase, where the proportions of the pyrochlore and disordered phases decreased and increased, respectively, with the Zr content. Additionally, although the coordination states of the Y and Sn cations were easily determined using ⁸⁹Y and ¹¹⁹Sn NMR, respectively, the coordination states of the Zr cations could not be confirmed directly by ⁹¹Zr NMR. However, using indirect analysis from results obtained with ⁸⁹Y and ¹¹⁹Sn NMR, it was determined that 6 coordinate Zr was present in each composition, and it was always present in a greater proportion than 8 coordinate Zr. Finally, although ⁸⁹Y NMR spectra of Y₂Ti[subscript(x)]Zr[subscript(2-x)]O₇ were extremely difficult to analyse, it was tentatively proposed that they could be similar to Y₂Sn[subscript(x)]Zr[subscript(2-x)]O₇ due to some similarities observed between the spectra.

This work focuses principally on two compounds, CeCu_1-xOS and LiFeAs, which have related layered structures but exhibit radically different physical properties. The nature of the air sensitivity of the ZrCuSiAs-type oxysulfide CeCu_1-xOS has been investigated by neutron diffraction and magnetometry. It was found that this compound can be made fully stoichiometric, with structural and magnetic properties that are consistent with other LnCuOS compounds, indicating that this is a bona-fide Ce³⁺ compound. Upon air exposure, Cu ions are extruded from the sulfide layer to leave a Cu-deficient phase with contracted unit cell parameters and a diminished paramagnetic moment consistent with mixed-valence Ce^3+/4+.The extruded Cu forms CuO and can be re-inserted into the sulfide layer by heating under a reducing atmosphere. This explains the anomalous behaviour of CeCuOS reported throughout the literature and has implications for the behaviour of other layered Cu-sulfides with oxidisable cations. At low temperatures Cu-deficient CeCu_0.8OS was found to exhibit structural ordering of Cu⁺ ions and vacancies, resulting in a √5a x √5a basal expansion of the high-temperature unit cell. The layered iron arsenide LiFeAs was synthesised and found to be superconducting below 17 K. Joint XRD/NPD measurements showed unambiguously that the compound adopts the anti-PbFCl structure with Li ions in a square-pyramidal LiAs5 environment. No evidence was found for an orthorhombic structural distortion at low temperatures. Further diffraction experiments showed that the compound can be made with non-stoichiometric compositions Li_1-yFe_1-y for small values of y (<0.05), as Fe can be accommodated on the Li site. This type of non-stoichiometry was found to strongly inhibit superconductivity (which was quenched entirely when y>0.02). Three series of compounds of type LiFe_1-xM_xAs (M = Mn, Co, Ni) were synthesised and characterised struturally bu high-resolution XRD and/or NPD. Substitution by Co and Ni was found to cause a monotonic decrease in T_c, and Ni was found to be twice as effective at suppressing T_c as Co. MuSR measurements showed the penetration depth increasing with Co and Ni substitution, consisitent with the superconducting state becoming less robust. Substitution by Mn was found to strongly inhibit superconductivity, and this behaviour is reminiscent of the non-stoichiometric Li_1-yFe_1-yAs materials. The structures and superconducting properties of LiFeAs and NaFeAs were studied under high pressures. Equations of state were obtained for each compound. Hydrostatic pressure was found to distort of the FeAs₄ away from ideal tetrahedral geometry in both compounds. These changes caused a monotonic decrease in T_c in LiFeAs, but has a smaller and more complex effect on the T_c of NaFeAs. Furthermore, NaFeAs was found to undergo a structural transition above P = 22 GPa, but the high-pressure structure could not be solved and this will become a target for future work.

This Thesis considers the use of solid-state metal ammines as ammonia storage materials and endeavours to understand these materials on a fundamental chemical level. The ammines of LiBH₄, MgCl₂, MgBr₂, MgI₂ and Mg(BH₄)₂, are investigated. The structures of lithium borohydride ammines, Li(NH₃)_nBH₄ with n = 1, 2, 3 and 4 are solved using X-ray and neutron diffraction, vibrational spectroscopy, nuclear magnetic resonance, and first-principles calculations. The reversibility, bonding and ammonia storage properties of this system are discussed, and investigated using gravimetric analysis and vibrational spectroscopy. The ammines of magnesium halides are investigated using X-ray and neutron powder diffraction, gravimetric techniques, nuclear magnetic resonance, first-principles calculations and vibrational spectroscopy. Their disordered structures, bonding, and decomposition are discussed, and the trends in their properties are used to interpret the properties of other ammines. The ammines of magnesium borohydride are investigated using X-ray and neutron powder diffraction, gravimetric techniques, first-principles calculations and vibrational spectroscopy. The structure, decomposition and reversibility of Mg(NH₃)₆(BH₄)₂ as an ammonia store are presented. Throughout the Thesis and at the end of each Chapter the possibility of using these ammines as solid-state ammonia stores is discussed.

Given the wide range of properties and applications of intermetallic compounds, it is important to achieve a detailed understanding of their structure and bonding. X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES) were used to study the electronic structure of several types of pnictides (compounds containing Pn = P, As). ZrAs2, forming a PbCl2-type structure, has been established to be a genuine binary phase that is strictly stoichiometric. At 900 °C, it supports extensive solubility of Ge to form the ternary extension Zr(GexAs1−x)As (0 ≤ x ≤ 0.4). XPS analysis and band structure calculations confirmed that the Ge and As atoms are anionic in character and that the substitution of Ge for As is driven by a depopulation of anion–anion antibonding states. ZrCuSiPn and REMAsO are important representatives of ZrCuSiAs-type materials. The small magnitudes of the binding energy shifts in the XPS spectra of ZrCuSiPn suggest significant covalent character in the Zr–Si, Zr–Pn, and Cu–Pn bonds, consistent with a three-dimensional structure. On progressing from ZrCuSiP to ZrCuSiAs, the charge transfer from metal to Pn atoms becomes less pronounced, as indicated by changes in the intensity of the Cu K-edge and Zr K, L-edge XANES spectra. Binding energy shifts and satellite features of the XPS spectra of REMAsO indicated that bonding in the [REO] layer is ionic, whereas bonding in the [MAs] layer is strongly covalent. Altering the electronic structure of one layer (by M or RE substitution) does not affect the electronic structure of the other layer, consistent with a two-dimensional structure in REMAsO. Metal-rich phosphides M2P (forming Cr2P-, Fe2P-, and Co2P-type structures) and M3P (forming Ni3P-type structures) were examined by XPS and XANES. The P 2p3/2 binding and P K-edge absorption energies decrease with greater ionic character of the M−P bonding and indicate the presence of anionic phosphorus. Interatomic effects play a more important role in affecting the energy shifts in these metal-rich phosphides than in the monophosphides, becoming more pronounced with higher metal concentration. Surprisingly, intraatomic effects dominate in mixed-metal phosphides (Ni1-xMx)2P despite evidence of metal-to-metal charge transfer from the Ni XANES spectra and Ni 2p XPS satellite features.

Nanotechnology has become the most advanced type of drug delivery system within the last decade. This advancement shifted the focus on small carriers to increase the efficiency of the drugs. Among these, gold nanoparticles (GNPs) were found to have profound biomedical applications. In current research, kanamycin embedded GNPs were prepared in a single step, single phase, and bio-friendly (green synthesis) procedure. The synthesized Kanamycin-GNPs (Kan-GNPs) were spherical in shape and had a size range of 15 ± 3 nm. The chosen kanamycin is an aminoglycosidic antibiotic that is isolated from Streptomyces kanamyceticus. These special antibiotic GNPs are further characterized using several analytical methods like Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), and Ultra-Voilet/Visible spectroscopy (UV/Vis spectroscopy). The following research is a direct bio-friendly embedment of an antibiotic agent on the surface of the GNPs without any secondary capping agent or surface modification procedures.