Spelling suggestions: "subject:"[een] STATIC COMPENSATORS"" "subject:"[enn] STATIC COMPENSATORS""
1 |
[en] COMMUTATION OVERVOLTAGES OF THYRISTOR VALVES IN STATIC COMPENSATORS / [pt] SOBRETENSÕES DE COMUTAÇÃO EM VÁLVULAS DE TIRISTORES DE COMPENSADORES ESTÁTICOSANTONIO GUILHERME GARCIA LIMA 30 September 2009 (has links)
[pt] Os compensadores estáticos são equipamentos modernos que estão sendo cada vez mais utilizados nos sistemas de potência. Existem basicamente três tipos de compensadores estáticos: reatores saturáveis, reator controlado e tiristores (RCT) e capacitor chaveado a tiristores (CCT). Os dois últimos são compostos basicamente por reatores, capacitores, válvulas de tiristores e um sistema de controle. As válvulas de tiristores e o sistema de controle são os itens tecnologicamente mais importantes e representam cerca de 30% do custo. Por isso este trabalho aborda um dos aspectos mais importante do projeto da válvula; as sobretensões de comutação. Estas sobretensões ocorrem repetitivamente nas condições normais de operação e são inerentes às características do equipamento e às características dos tiristores. Este trabalho analisa a influência destas características e apresenta um modelo digital de tiristor que permite representar detalhadamente estas sobre tensões. Finalmente, os resultados obtidos com este modelo e com o programa SPICE são comparados com a análise teórica e com resultados medidos em laboratório. / [en] The Static Var Compensators are modern equipments which are been more and more used in power systems. There is three types of static var compensators; saturable reactors, thyristor controlled reactors and thyristor switched capacitors. The thyristor valves and control system are, from the technological point view, the most important items of the last two types and represent about 30% of its cost. Therefore, this work treats with one of the most important aspects of the design of thyristor’s valves; the commutation overvoltages. These overvoltages occur repeatedly under normal conditions and are caused by intrinsic characteristics of the equipment and by the intrinsic characteristics of the thyristors. This works analyses the influence of these characteristics and presents a thyristor digital model which permits the detailed representation of these overvoltages. Finally, the results obtained with this model and with the digital program SPICE are compared with the theoretical analysis and with measured results.
|
2 |
[pt] COMPENSADORES ESTÁTICOS EM SISTEMAS DE POTÊNCIA / [en] STATIC COMPENSATORS IN POWER SYSTEMSPATRICK JOSQUIN 25 January 2007 (has links)
[pt] Uma das fases importantes no planejamento dos Sistemas
Elétricos de Potência é a verificação do seu
comportamento
dinâmico. Sob este aspecto é conveniente que se tenha
uma
modelagem mais real possível de todos os componentes do
sistema, havendo particular interesse numa boa
representação principalmente das máquinas (geradores e
síncronos).
Ultimamente, os Compensadores Estáticos (SVS) tem sido
um
elemento valioso no controle da potência reativa dos
sistemas Elétricos de EAT. Desta forma, os programas
digitais até então utilizados tiveram que ser
convenientemente modificados a fim de considerar este
novo
equipamento.
A finalidade deste trabalho é apresentar a representação
dos SVS nos programas de estabilidade. O enfoque
principal
será dados aos SVS controlados a tiristores (TCR, TCT,
TSC
ou mistos) nos quais há intervenção de sistemas
específicos de controle. Com base na modelagem proposta,
é
feita uma análise da operação dos SVS a tiristores em
regime permanente e, em transitório. Conjuntamente com a
apresentação dos vários tipos de SVS a tiristores, é
introduzida uma metodologia para a determinação de seus
valores nominais, suas principais características
operativas, fazendo-se, sempre que possível, uma
comparação com outros tipos de Compensadores Estáticos
e,
com os Compensadores Síncronos atualmente em operação. / [en] One of the most important phases of power systems
planning, is the examination of its dynamic behavior.
It is convenient under this aspect, to have the models of
all components pertaining the system, as close as possible
to the real conditions of operation being of particular
interest a good representation, mainly of the machines
(generators and synchronous compensators).
Lately, the static compensators (SVS), have been an
important component in the control of reactive power for
the UHV electrical systems. Due to this fact, the digital
programs used until then, had to be conveniently modified
so as to consider this new equipment.
The purpose of the present work, is to introduce the
representation of the SVS in the stability programs.
Special care will be give to the SVS controlled by
thyristors (TCR, TCT, TSC or mixed), in which the
intervention of specific control systems takes place.
Based upon the proposed models, an analysis of the
operation of the thyristors SVS in permanent and transient
regimes is performed. Together with the presentation of
various types of thyristors SVS, it is introduced methods
to determine nominal values, main operational
characteristics, always comparing, when possible, to other
types of static compensators, as well as, with the
synchronous compensators in operation.
|
3 |
[en] SATURATED REACTOR TYPE STATIC COMPENSATOR MODELLING AND ITS IMPLEMENTATION IN A DIGITAL TRANSIENT STABILITY PROGRAM / [pt] MODELAGEM DE COMPENSADORES ESTÁTICOS TIPO REATOR SATURADO E SUA IMPLEMENTAÇÃO NUM PROGRAMA DE ESTABILIDADE TRANSITÓRIAJOSE EDUARDO ONODA PESSANHA 16 January 2007 (has links)
[pt] Este trabalho envolve o desenvolvimento de um modelo de
compensador estático do tipo reator saturado e sua
implementação no programa de estabilidade transitória
TRANSTAB, implantado no computador CYBER 170-835 da
PUC/RJ.
O modelo é composto por bancos de capacitores fixos,
responsáveis pela geração de reativos, em paralelo com o
reator saturado, responsável pela absorção de reativos.
São obtidos em primeiro lugar as equações do modelo e, a
partir destas, elabora-se o diagrama de blocos a ser
implementado no programa.
Vários testes (simulações digitais) são realizados
utilizando sistemas de potência, sob condição de
distúrbio. Os resultados obtidos são então comparados
com outros da literatura e a partir daí se comprova a
validade do modelo desenvolvido.
Com a conclusão deste trabalho, o programa TRANSTAB
passa a dispor de dois tipos de compensadores estáticos:
Reator Saturado e Reator Controlado por Tiristores. / [en] The model comprises fixed capacitor banks, for the
generation of reactive power, in parallel with the
saturated reactor, for the absortion of reactive power.
The model equations are obtained in first place and from
them the block diagram is developed for implementation in
the program.
Tests are carried out (digital simulations) using power
systems under disturbance conditions. The results are then
compared with others from the literature to access the
validity of the model.
With the conclusion of this work the TRANSTAB program stay
with two types of static compensators: Saturated Reactor
Type and Thyristor Controled Reactor.
|
4 |
[en] THYRISTOR-CONTROLLED REACTOR-TYPE STATIC COMPENSATOR IMPLEMENTATION IN A TRANSIENT STABILITY PROGRAM / [pt] IMPLEMENTAÇÃO DE COMPENSADORES ESTÁTICOS CONTROLADOS A TIRISTORES EM UM PROGRAMA DE ESTABILIDADE TRANSITÓRIAPAULO EDMUNDO DA FONSECA FREIRE 27 February 2007 (has links)
[pt] Programas de estabilidade transitória são ferramentas
indispensáveis no planejamento e na operação de sistemas
de potência.
Compensadores estáticos têm por objetivo o controle de
tensão em regime permanente e a melhoria da estabilidade
transitória e dinâmica. São equipamentos modernos que
encontram no sistema de transmissão brasileiro um vasto
campo de aplicação.
Este trabalho envolveu a implementação de um programa de
estabilidade transitória (TRANSTAB) no computador CYBER
170-853 da PUC/RJ e a inclusão neste programa de um modelo
de compensadores estáticos tipo reator controlador por
tiristores e de uma rotina de geração de relatórios de
saída.
O TRANSTAB faz uso das mais modernas técnicas de simulação
e está fartamente documentado ao longo deste trabalho. São
feitas sugestões de inclusão de modelos que visam adequar
o programa ao sistema elétrico brasileiro.
Foi realizada uma rápida revisão acerca dos tipos,
aplicados e princípios de funcionamento dos compensadores
estáticos. O seu sistema de controle foi objeto de uma
análise mais detalhada principalmente nos aspectos com a
sua representação e modelagem em estudos de estabilidade. / [en] A transient stability program is a very important tool for
power system planning and operation.
Static compensators are designed to provide voltage
control on normal operation and to improve the transient
and dinamic stability. They are modern equipments with a
great field of application on the brazilian transmission
system.
This work envolves the transient stability program
(TRANSTAB) implementation in PUC´s computer (CYBER 170-
835) and the inclusion of a static compensator (Thyristor
Controlled Reactor Type) model and a new output printout
routine in this program.
The TRANSTAB program makes use of the most recent
simulation techniques and it is very well documented in
this work. Suggestions are made on the inclusion of new
equipment models, in order to extend the program modelling
capability.
A quick review is made on the static compensator types,
applications, and functioning basics. Its control system
is the object of a more detailed study, mainly on the
aspects related to the modelling and representation on
stability studies.
|
Page generated in 0.0241 seconds