Reproduction de : Thèse de doctorat : Génie des procédés : Toulouse, INPT : 2005. / Titre provenant de l'écran-titre. Bibliogr. 129 réf.

In the pulp and paper industry, the interaction between the gas, liquid, and solid phases occurring in various unit operations is often not clearly understood. Such multi-phase operations include flotation deinking (a separation process of paper fibres in the recycling process) as well as the delignification and bleaching operations in the kraft pulping process. Much of the design, operation, and optimization of such processing equipment are dependent upon past experience as well as trial-and-error methodologies. Pulp fibre suspensions possess a complex and unique rheology. The unpredictability of the behaviour of pulp suspensions at any given mass concentration is due to the bonding between the fibres resulting in network formation (which depends on suspension consistency) with this interaction creating complexity in fluid flow in various unit operations. This thesis describes the gas hydrodynamic behaviour and gas-liquid mass transfer characteristic in low- and medium-consistency pulp suspensions in batch operation. First, the hydrodynamic behaviour of the gas phase (air) in water and pulp suspensions having mass concentrations up to Cm = 7% is examined by visually observing and recording the bubble shape, size, and rise velocity in a rectangular channel. Results are obtained using a high-speed video camera. Second, the hydrodynamic behaviour is described in terms of the gas holdup along with axial and radial gas phase distributions in water and kraft pulp suspensions having mass concentrations between Cm = 0.5 and 9% in a batch-operated cylindrical bubble column. The gas holdup results are compared using three methods: the suspension height method, the pressure difference method, and the electrical resistance tomography (ERT) method. Finally, the volumetric gas-liquid mass transfer characteristic of air in water and kraft pulp suspensions having mass concentrations up to Cm = 4% is examined in the same bubble column in batch-operation using a dissolved oxygen probe. Experimental results were comparable to that in literature for water and for pulp fibre suspensions having Cm < 2%. The presence of fibres had a significant effect on the gas holdup and mass transfer characteristic with results providing insight on the limitations that exist in industrial pulp unit operations.

No description available.

No description available.

No description available.

In the pulp and paper industry, the interaction between the gas, liquid, and solid phases occurring in various unit operations is often not clearly understood. Such multi-phase operations include flotation deinking (a separation process of paper fibres in the recycling process) as well as the delignification and bleaching operations in the kraft pulping process. Much of the design, operation, and optimization of such processing equipment are dependent upon past experience as well as trial-and-error methodologies. Pulp fibre suspensions possess a complex and unique rheology. The unpredictability of the behaviour of pulp suspensions at any given mass concentration is due to the bonding between the fibres resulting in network formation (which depends on suspension consistency) with this interaction creating complexity in fluid flow in various unit operations. This thesis describes the gas hydrodynamic behaviour and gas-liquid mass transfer characteristic in low- and medium-consistency pulp suspensions in batch operation. First, the hydrodynamic behaviour of the gas phase (air) in water and pulp suspensions having mass concentrations up to Cm = 7% is examined by visually observing and recording the bubble shape, size, and rise velocity in a rectangular channel. Results are obtained using a high-speed video camera. Second, the hydrodynamic behaviour is described in terms of the gas holdup along with axial and radial gas phase distributions in water and kraft pulp suspensions having mass concentrations between Cm = 0.5 and 9% in a batch-operated cylindrical bubble column. The gas holdup results are compared using three methods: the suspension height method, the pressure difference method, and the electrical resistance tomography (ERT) method. Finally, the volumetric gas-liquid mass transfer characteristic of air in water and kraft pulp suspensions having mass concentrations up to Cm = 4% is examined in the same bubble column in batch-operation using a dissolved oxygen probe. Experimental results were comparable to that in literature for water and for pulp fibre suspensions having Cm < 2%. The presence of fibres had a significant effect on the gas holdup and mass transfer characteristic with results providing insight on the limitations that exist in industrial pulp unit operations.

Thesis (Ph. D.)--School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, 2005. Directed by F. Joseph Schork. / Schork, F. Joseph, Committee Chair ; Morris, Jeffrey F., Committee Co-Chair ; Forney, Larry J., Committee Member ; Breedveld, Victor, Committee Member ; Mucha, Peter J., Committee Member ; Smith, Marc K., Committee Member. Includes bibliographical references.

Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2007 / The rheological behaviour of non-Newtonian, highly concentrated and non-transparent fluids used in industry have so far been analysed using commercially available instruments, such as conventional rotational rheometers and tube viscometers. When dealing with the prediction of non-Newtonian flows in pipes, pipe fittings and open channels, most of the models used are empirical in nature. The fact that the fluids or slurries that are used normally are opaque, effectively narrows down the variety of applicable in-line rheometers even further, as these instruments are normally based on laser or visible light techniques, such as Laser Doppler Anemometry. Electrical Resistance Tomography is a non-invasive method used to look into opaque suspensions during pipe flow, but cannot be used to measure in-line rheometry. In this research, an Ultrasound Pulsed Echo Doppler Velocity Profile technique (UVP), in combination with a pressure difference (PD) was tested to provide in-line measurement of rheological parameters. The main objective ofthis research was to evaluate the capabilities of the UVP-PD technique for rheological characterisation of different concentrations of non-transparent non-Newtonian slurries. A unique pipe viscometer was designed and constructed. It consisted of four pipes, one of stainless steel and three of PVC, linked to an in-line mass-flow meter and equipped with two different ranges of pressure transducers on each pipe. The stainless steel pipe, with an inner diameter of 16 mm, was equipped with a specially designed flow adapter for in-line rheological characterisation using the UVP-PD method. The three PVC pipes with different diameters of 9 mm, 13 mm and 16 mm served as a tube viscometer for in-line rheological characterisation of mineral suspensions.

In the pulp and paper industry, the interaction between the gas, liquid, and solid phases occurring in various unit operations is often not clearly understood. Such multi-phase operations include flotation deinking (a separation process of paper fibres in the recycling process) as well as the delignification and bleaching operations in the kraft pulping process. Much of the design, operation, and optimization of such processing equipment are dependent upon past experience as well as trial-and-error methodologies. Pulp fibre suspensions possess a complex and unique rheology. The unpredictability of the behaviour of pulp suspensions at any given mass concentration is due to the bonding between the fibres resulting in network formation (which depends on suspension consistency) with this interaction creating complexity in fluid flow in various unit operations. This thesis describes the gas hydrodynamic behaviour and gas-liquid mass transfer characteristic in low- and medium-consistency pulp suspensions in batch operation. First, the hydrodynamic behaviour of the gas phase (air) in water and pulp suspensions having mass concentrations up to Cm = 7% is examined by visually observing and recording the bubble shape, size, and rise velocity in a rectangular channel. Results are obtained using a high-speed video camera. Second, the hydrodynamic behaviour is described in terms of the gas holdup along with axial and radial gas phase distributions in water and kraft pulp suspensions having mass concentrations between Cm = 0.5 and 9% in a batch-operated cylindrical bubble column. The gas holdup results are compared using three methods: the suspension height method, the pressure difference method, and the electrical resistance tomography (ERT) method. Finally, the volumetric gas-liquid mass transfer characteristic of air in water and kraft pulp suspensions having mass concentrations up to Cm = 4% is examined in the same bubble column in batch-operation using a dissolved oxygen probe. Experimental results were comparable to that in literature for water and for pulp fibre suspensions having Cm < 2%. The presence of fibres had a significant effect on the gas holdup and mass transfer characteristic with results providing insight on the limitations that exist in industrial pulp unit operations. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate

No description available.