Consuming two major greenhouse gases, carbon dioxide (CO2) and methane (CH4), to produce synthesis gas, which is a mixture of carbon monoxide (CO) and hydrogen (H2), CO2 reforming of CH4 shows significant environmental and economic benefits. However, the process has not found wide industrial application due to severe catalyst deactivation, basically caused by carbon formation. Therefore, it is of great interest to develop stable catalysts without severe deactivation. This work is primarily focused on the development of novel nickel-based catalysts to achieve stable operation for CO2 reforming of CH4.<p> Following Dowdens strategy of catalyst design, a series of nickel-based catalysts are designed with a general formula: Ni-Me/AlMgOx (Me = Co, Cu, Fe, or Mn). The designed catalysts are prepared using co-precipitation method and tested for CO2 reforming of CH4. Catalyst screening showed that the Ni-Co/AlMgOx catalyst has superior performance in terms of activity and stability to other Ni-Me/AlMgOx (Me = Cu, Fe, or Mn) catalysts. A 2000 h long-term deactivation test has shown that the Ni-Co/AlMgOx has high activity and excellent stability for CO2 reforming of CH4.<p> Further investigation on the Ni-Co/AlMgOx catalysts shows that adjusting Ni/Co ratio and Ni-Co loading can significantly affect the catalyst performance. Carbon free operation for CO2 reforming of CH4 can be achieved on the catalysts with a Ni/Co close to 1 and Ni-Co overall loading between 4-10 %. In addition, calcination temperature shows important impacts on the performance of Ni-Co/AlMgOx catalysts. A calcination temperature range of 700-900 oC is recommended.<p> The Ni-Co/AlMgOx catalysts are characterized using various techniques such as ICP-MS, BET, CO-chemiosorption, XRD, TPR, TG/DTA, TEM, and XPS. It has been found that the high activity and excellent stability of Ni-Co/AlMgOx catalysts can be ascribed to its high surface area, high metal disperation, small particle size, strong metal-support interaction, and synergy between Ni and Co.<p> Kinetic studies have shown that the CH4 decomposition and CO2 activation could be the rate-determining steps. Both Power-Law and Langmuir-Hinshelwood kinetic models can fit the experiment data with satisfactory results.

Consuming two major greenhouse gases, carbon dioxide (CO2) and methane (CH4), to produce synthesis gas, which is a mixture of carbon monoxide (CO) and hydrogen (H2), CO2 reforming of CH4 shows significant environmental and economic benefits. However, the process has not found wide industrial application due to severe catalyst deactivation, basically caused by carbon formation. Therefore, it is of great interest to develop stable catalysts without severe deactivation. This work is primarily focused on the development of novel nickel-based catalysts to achieve stable operation for CO2 reforming of CH4.<p> Following Dowdens strategy of catalyst design, a series of nickel-based catalysts are designed with a general formula: Ni-Me/AlMgOx (Me = Co, Cu, Fe, or Mn). The designed catalysts are prepared using co-precipitation method and tested for CO2 reforming of CH4. Catalyst screening showed that the Ni-Co/AlMgOx catalyst has superior performance in terms of activity and stability to other Ni-Me/AlMgOx (Me = Cu, Fe, or Mn) catalysts. A 2000 h long-term deactivation test has shown that the Ni-Co/AlMgOx has high activity and excellent stability for CO2 reforming of CH4.<p> Further investigation on the Ni-Co/AlMgOx catalysts shows that adjusting Ni/Co ratio and Ni-Co loading can significantly affect the catalyst performance. Carbon free operation for CO2 reforming of CH4 can be achieved on the catalysts with a Ni/Co close to 1 and Ni-Co overall loading between 4-10 %. In addition, calcination temperature shows important impacts on the performance of Ni-Co/AlMgOx catalysts. A calcination temperature range of 700-900 oC is recommended.<p> The Ni-Co/AlMgOx catalysts are characterized using various techniques such as ICP-MS, BET, CO-chemiosorption, XRD, TPR, TG/DTA, TEM, and XPS. It has been found that the high activity and excellent stability of Ni-Co/AlMgOx catalysts can be ascribed to its high surface area, high metal disperation, small particle size, strong metal-support interaction, and synergy between Ni and Co.<p> Kinetic studies have shown that the CH4 decomposition and CO2 activation could be the rate-determining steps. Both Power-Law and Langmuir-Hinshelwood kinetic models can fit the experiment data with satisfactory results.

Thesis (Ph. D.)--West Virginia University, 2009. / Title from document title page. Document formatted into pages; contains xii, 122 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 115-122).

Thesis (M.S.)--University of Texas at El Paso, 2009. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.

Thesis (M.Eng.(Chemical Engineering))--University of Pretoria, 2008. / Abstract in English. Includes bibliographical references.

Thesis (M.S.)--West Virginia University, 2006. / Title from document title page. Document formatted into pages; contains xvi, 291 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 289-291).

Dissertation (Ph.D.)--Worcester Polytechnic Institute. / Keywords: microkinetics, reaction routes, mechanism analysis, water-gas-shift. Includes bibliographical references (p.295-305).

Thesis (M.S.)--West Virginia University, 2006. / Title from document title page. Document formatted into pages; contains xiii, 172 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 123-125).

In recent years economic, environmental, and strategic concerns over the use of petroleum resources have led to increased interest in renewable resources. Biomass gasification produces a synthesis gas composed of primarily carbon monoxide, hydrogen, and carbon dioxide, which can be fermented into a variety of fuels and chemicals. This study evaluated the performance of a two-stage approach to batch synthesis gas fermentations. The first stage employs a rich medium optimized for cell growth, while the second stage is designed to maximize production of acetic acid from synthesis gas. This two-stage approach is hypothesized to be more metabolically efficient than previous single-stage designs. This study presents the evaluation of known acetic acid producing organisms described in the literature, and efforts to isolate a novel microbial catalyst for synthesis gas fermentations. Finally, new techniques were developed and implemented in order to develop a more effective system for batch synthesis gas fermentations.

Partial oxidation of CH4, CO2 reforming of CH4, and oxidative CO2 reforming of CH4 to produce synthesis gas at 700°C over supported Ni catalysts have been studied. A Ni/Mg-Al catalyst was prepared by the solid phase crystallization (spc-) method starting from a hydrotalcite-type (HT) anionic precursor. From XRD analysis, only Ni0.5Mg2.5Al catalyst consists of the layered hydrotalcite-type structure; not Ni0.5Ca2.5Al and Ni/Al2O3 catalysts. By TPR test, the Ni0.5Mg2.5Al-HT catalyst requires a high reduction temperature than the Ni0.5Ca2.5Al catalyst. It implies that the Ni0.5Mg2.5Al-HT which has a layered structure shows the stronger interaction strength between the molecules. It might increase the resistance of coke formation on the surface of the catalyst. For the reaction tests, the Ni0.5Ca2.5Al showed the highest initial activity for synthesis gas production for all reactions; but, its activity was decreased quickly due to coke formation except during the partial oxidation of CH4. The Ni0.5Mg2.5Al-HT showed a relatively higher reactivity compared to the equilibrium level than Ni/Al2O3 catalyst; and it shows very stable reactivity than other catalysts. By TPO test, the Ni0.5Mg2.5Al-HT has the lower amount of coke formed during the reaction than the Ni0.5Ca2.5Al catalyst. It confirms that the Ni0.5Mg2.5Al-HT catalyst has stronger resistance to coke formation; and it leads to provide stable reactivity in any reforming conditions at high temperature. Therefore, the Ni0.5Mg2.5Al-HT catalyst was the most promising catalyst in terms of activity and stability for partial oxidation, CO2 reforming, and oxidative CO2 reforming of CH4. The Ni0.5Mg2.5Al-HT catalyst was used to investigate the CO2 reforming of CH4 kinetics. With increasing CH4 partial pressures at constant CO2 partial pressure, the rates of CH4 consumption were increased. However, with increasing CO2 partial pressure at constant CH4 partial pressure, CH4 consumption rates was increased at lower CO2 partial pressure, but turned to independent at higher CO2 partial pressure. When the partial pressure of H2 was increased, the CO formation rate was decreased; it confirmed that the reverse water-gas shift (RWGS) reaction was occurring during the CO2 reforming of CH4 reaction. In addition, the reaction kinetic expression was proposed when the CH4 dissociation step was considered as a rate-limiting step.