he master’s thesis consists of a case study of an observation tower design made of glue laminated timber and steel. There are two different tower shapes of anchored or free standing tower and these towers are compared. One of the design is chosen and elaborated into final detailing. A short review of main issues bound with the observation towers is given. The review deals mainly with loading (mainly priniples wind loads are analised) and evaluating of towers (ultimate limit states, service limit states and acceleration comfort). The height of final construction is up to 60m. The design is formed by a space lattice structure made of glue laminated timber and steel members of different class. The members are fastened mainly by means of dowel joints with slotted-in-plates . There is a light steel stairway inserted into the main structure.

The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an administration building according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2012. Structural analysis deals with the design of the reinforced concrete (RC) flat slab above the 4rd strorey which is particularly supported by RC columns and particularly lies on RC walls. Furthermore, the Master’s thesis contains analysis of some selected columns of last three storeys, column of lowest storey, construction of stairway between 4rd and 5th storeys. The work beside this deals with the calculation and design of foundation of the object. The rest parts of the load-bearing structure are not solved in the Master’s thesis.

The matter of this diploma thesis is a static storage tank for petroleum substances, the study of a solution for appropriate shape of shell and its effort to dihedral for roofing, and the study of effect of the storage of inner roofs walls of the tank to the size of the internal forces. The internal walls are carried out by the method of finite elements in the engineering program Scia Engineering 2013 and on the basis of it, designing of the framing sections of the tank. There is a calculation part of the lower horizontal bias wreaths of the shell and internal supporting wall. All the components are assessed on the 1st limit state of the load-bearing capacity and the 2nd limit state of the application (emergence cracks, limiting voltage in the concrete and a prestressing steel). The existing external wall is assessed only on the marginal status load of carrying capacity. The part of diploma thesis is also drawing documentation, accompanying report and technical report. The goal of the diploma thesis was to design the tank without an occurrence of the cracks in the concrete so as the vertical wall was prestressing only in the horizontal direction and the optimal proposal roof tanks as an addition.

This diploma thesis deals with the subject of slenderness bars’ stability assessment, especially in the steel structures. Before the assessment of bars in the frame constructions, we search for the influence of the computational model’s settings on the final result. The initial geometrical imperfections are examined on the model of Euler’s bar. The influence of the rigidity of girders on the poles’ buckling length is examined on the basic frame construction. The buckling lengths are assessed in the comparison with the figures we got from the statistical tables and the computational software. The influence of construction’s initial tilt and its replacement by the system of outer forces is examined on the frame structure. Three-hinged frame structure with variable cross-section member is designed then and the influence of non-linear calculations on the inner forces is studied. In the complex frame assessment, the influence of the number of parts of variable cross-section member on the bars’ buckling length is examined.

The matter of this thesis is static design and examination of prestressed storage tank to 50000 tons of sugar. Computational model of the steel roof structure is processed and its effect on the silos. Loads is provided of sugar. Optimal design is performed and assessment ultimate and serviceability limit state reinforced concrete and prestressing horizontal silo wall including local load. Next, it is performed the design of a reinforced concrete of the plane bed and column and assessment at the ultimate limit state. The thesis is also drawing documentation, technical report and visualization of construction process. The aim of this work is to the design of the main components based on the required storage capacity tank, mechanical properties of the stored material and technical amenities.

The aim of the diploma thesis is construction-technological project of the whole construction focusing on the main building object - Apartment building, which is based on large-diameter drilling piles. The basis of the work is the budget of the main building and its timetable. Part of the thesis is a solution of organization of construction and design of building site equipment, technological regulation of selected activities, quality control and solution of transport relations including oversized transport. In addition, the design of the machine assembly, assessment of lifting mechanisms, safety and health protection and protection of the environment are solved.

This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.

The aim of this master's thesis is the construction-technological project of the entire building focusing on major construction building - Multifunctional house, which is based on large-diameter piles. The main part of thesis are budget of object and time schedules of construction. Part of the thesis is organization of construction and design of the site eguipment, technological regulation of selected work, quality control and solving transport relations including oversize cargo. It also deals with the design of mechanical assemblies, health and safety, safety of environment and design of instructions for use of building.