The dissertation work deals with the issue of water treatment and possibilities of energy savings during the operation of sewage treatment plants. The aim of the work is to find the potential of alternative energy use, economical consumption, improvement of the facility system management and quality improvement of the wastewater treatment process. In the first part of the work, operating processes, energy flows and energy savings are discussed. To analyze the problematics, larger sewage treatment plants were chosen. Thanks to their size, it was easier to find critical points and test the usage of renewable sources in operation. After the energy audit, the individual processes were assessed and real operation pitfalls were determined. Further steps led to focusing on smaller facilities up to 2 000 PE. This step was carried out with the intention of preparing these plants for the planned legislative change and helping to create or modernize more energy-efficient solutions. Thanks to the establishment of consortium of Brno University of Technology, the Department of Electric Power Engineering and a company dealing with water treatment and automation control, a solution was created that modernize the electrical, automation and water treatment part of the plant operation. This innovative application was installed in the sewage treatment plant, where the issues were debugged, control algorithms were tested and the entire operation was launched in automatic mode. At the end of the wastewater treatment plant modernization, PV panels were installed on the roof, thus partially suppling the object with renewable energy.

I am dealing with implementation of auction system for internet presentation of art gallery in my dissertation. Advertising agency CCD Media Ltd had given an order for solution. In all sphere of business is trend of implementing of auctions, especially electronic in present. Sale of art cannot avoid this trend. Wi will find out advantages of this solution in use.

The subject of master’s thesis "The study of the operating production management” is to rationalize production and distribution of compressed air. The thesis deals with the description of the current state, the analysis of compressed air production and the proposal for rationalization. The basis of this work is to implement lean manufacturing method in the company DI Industrial. The proposed steps are primarily designed for implementation in this firm but their principles and methods could be used in any company that uses compressed air technology. The study includes theoretical knowledge in the range of Lean manufacturing, Six Sigma tools and a pneumatics.

Description of present state of compressed air production in Motorpal a.s. Jihlava. Toll used for production procedure and output improvement, quality problems solving and improvement implemantation. Problem define, measure, analyse, iprovement proposals and improvement implementation, improved process control via Lean Six Sigma methodics.

This thesis deals with the possibility of the integration of gas microturbine into a laundry energy system. The thesis further describes the system of professional laundry care and used equipment in industrial practice. It presents several possible scenarios of operation and compares their energy costs.

The aim of thesis is the energy evaluation of building for public facilities - kindergarten. From the beginning work deals with the analysis of a given topic, standard and legal regulations associated with the topic. This knowledge is further applied to a specific building. It follows by evaluation of the current state of the building, its systems, internal environment and analysis of measures leading to energy savings and ensuring the quality of the indoor environment of building. Work also deals with experimental measurements of selected parameters of the internal environment.

The thesis describes a design of the office building of Wanemi a.s. company in Zábřeh na Moravě. The company intends to build an ecological paper mill in the city. The office building is located at the „green“ entrance zone of the manufacturing facility. The building is designed in accordance with the requirements of energy–efficient buildings and the philosophy of the company – People and nature. The „green“ entrance zone that includes a placement of individual objects (office building, presentation pavilion, info center) has been solved as a pre-diploma thesis.

The thesis is focused on comparing the different forms of taxation models of financial lease by value added tax and evaluating the effects of choosing a particular form of taxation in the accounts. In reaching the goal of work, it is compared the different ways of acquiring property. It especially deals with the acquisition of own resources, the loan financing, the two types of financial lease and the ensuring the liability by the transfer of rights. Comparison of methods of property acquisition is performed using both net present value, both tax aspects.

The content of this diploma thesis includes description of different methods of improvement in business. It focuses on incremental improvements over time and also on breakthrough improvement - so called radical innovation. On the basis of knowledge gained while studying literature for the theoretical part, I have analyzed in the practical part the states of three selected improvement methods in the company Robert Bosch Ltd. Chosen areas were: the application of the 5S method in the company, the conduct of regular satisfaction surveys and the process of submission and evaluation of improvement. The 3rd mentioned area - the area of improvement proposals, is characterized in detail in the practical part and gradually leads to the application of my own improvement proposal into practice which is considered as the main contribution of this thesis. My own proposal deals with the optimization of warehouse management. It is focused on the external warehouse of Robert Bosch Ltd. in order to supply material to the company's production lines more efficiently. It concerns the rearranging of the storage of key material items and their transfer to more suitable rack positions within the warehouse. The calculations are based on the number of stock removals per quarter for each item. Due to the outputs of the data analysis processed in my own improvement proposal, it was possible to decide in which rack positions it would be appropriate to store individual material items so that their subsequent transfer into production would be as efficient as possible in terms of time and, therefore, in terms of financial costs. The amount of time taken to transfer material items into production was crucial for the results of this thesis because their more efficient placement reduces the handling time so that it is possible to quantify the time and therefore financial savings of the project. The data analysis was focused on material items placed on unsuitable rack positions due to their number of stock removals per quarter. The aim was to suggest which materials would be better to transfer to a more appropriate type of rack positions, with an emphasis on the key items that affect the process of removal into production the most and represent a considerable financial costs.

The introduced diploma thesis deals with the issue of evalution and reward system in a particular company XY s.r.o. The theoretical part is focused on job evalution, remuneration and benefits. The practical part is aimed at the analysis of the payroll system which is supplemented by my own observations and opinions of employees. The goal is to suggest changes in the evaluation and reward system which will lead to productivity increase while minimizing costs.