Summary Along the development of bussines and market environment, where supply is superior to demand todays world brings also higher standards of a customer. Customers aren't willing to make any concessions or tolerate mistakes of suppliers, and still demand highest quality. Companies are exposed to big competition and searching for possibilities how to prevail on market. One of these possibilities is high quality product and service. The amount of companies, which have quality certificates proves how important is to have good reliable product. The product and service quality became an important rival factor and often evenly matched, or even more important then price. Graduation theses is concerning area of a management quality as a tool for upgrading efficiency of a company and quality management with the purpose to gain and maintain customers satisfaction. The objective of this theses is to evaluate actual situation of quality management and to propose general changes in managing, leading to create quality system which enables acquirement of the quality certificate. To achieve objective of this theses, an analyses of current management in a certain company was elaborated. On the base of this analyses general changes in quality management were proposed by selected elements of the norm ISO 9001:2000. The outcome of this work proves, that there are many steps and changes needed to be accomplished to achieve in the quality management which is true to the norm CSN EN ISO 9001:2001.

The goal of the Master's Thesis is to describe and analyze the current situation of the management system with regard to compliance of standard ČSN EN ISO 9001:2009 requirements at OFA Ltd. The result of the thesis will be used as basic information for implementation and subsequent certification of the quality management system at the company. The Master's Thesis contains improvement recommendations and suggestions oriented on quality management system at OFA Ltd. In the theoretical part is described the term quality and explain why quality is important nowadays. In that part are also mentioned some concrete quality management systems including the system of the international standard ISO 9001.

The diploma thesis is dealing with the repair procedure of the cracked ram of the press – machine parts made from gray cast iron by casting. The ram is a part of the repaired forming press LET 160. The presented work contains an overview and analysis of the technologies of repair of cast iron by welding. On the basis of the theoretical part is designed the procedure of repairing. The aim of the experimental tests is selecting the most suitable additional materiál and verifying the proposed welding process. The welding method was selected by a low preheating manual metal arc. All the pWPS were prepared for the welding of all test specimens. Experimental samples were subjected to visual, macroscopic, microscopic analysis and hardness measurement. Based on the results of the experiments was suggested a welding repair procedure with a pWPS.

This diploma thesis deals with the issue of EMC of tram vehicles and traction system. The first chapter defines the issues that are then dealt with in the thesis. The next chapter lists the objectives of the work. Subsequent chapters analyze the issues described in chapter 2. In the last chapter, a flow chart is proposed, which should serve as a tool to estimate the hazards of the traction drive due to induced bearing currents.

The project of Master’s thesis elaborated within engineering studies of branch 23-03-T002 proposes a technology of production of disk brake piston made of low-carbon steel EN C10E. Supposed production amount is 300 000 pieces per year. With knowledge of literary study on the theme of cold steel bulk forming, three variants of production technique were proposed. The chosen one, for which the technological and energy computations were accomplished, consists of two basic forming operations. For manufacture realization was selected three-stage automatic forming machine TPD 630 (manufacturer Šmeral Brno) with nominal forming output of 6 300 kN. As a material of extruding punch, tool-steel EN X100CrMoV5-1was chosen. For extruding dies was selected high speed steel HS 6-5-2 and its shrink ring is made of high quality steel 60WCrV8. Optimalization of tool properties was performed with specialized PC software.

This diploma thesis is focused on design of adsorber. Rule CSN EN 13 345 is used to calculate of design adsorber. Finite element method (FEM) is used tor stress analysis a categoration of the stress.

Experimental work evaluated the dependence of the thickness of the cutting edge, its roughness and assessment of appearance with regard to the defects resulting from the diameter of the focal spot during oxidative cutting Yb:YAG laser. Other variables include the experiment: process parameters such as laser power, cutting speed, oxygen pressure and focus position. Experiment is based on the Taguchi tables. Test samples were cut off from sheet thickness 10, 15 and 20 mm. Representatives of conventional steel were S235JRC+N, S235JR, S235JR+N and steel type RAEX developed for laser and plasma cutting. Samples were evaluated according to the ČSN EN ISO 9013. The evaluation of samples was into classes according to standards of quality. Hardness measurements were performed on the samples thickness 20 mm of convectional steel and steel type RAEX.

There are approximately 20 000 small dams in the Czech Republic. This number entails many ponds or small flood attenuation reservoirs, which provide protection against floods. We do not know much about the structure and material properties of these earth dikes. Concerning the small dam stability the current technical standard ČSN 75 2410 focuses foremost on the angle of both the upstream and downstream slopes in case of different materials, and the method of the stability assessment in case of a dam height being 6m or more. Most of these earth dikes are still standing in spite not being built according to any technical standards. They do not follow any standards mostly because they were built before the modern technical standards were published. This diploma thesis focuses on assigning the degree of a reserve in the safety factor for studies of 5 homogeneous earth dikes and 3 inhomogeneous earth dikes. The calculation was done using the Plaxis 2D software using to the shear strength reduction method. The Calculation of the safety degree is made for 4 typical load cases.

The thesis deals with the optimization of process parameters in the oxidative laser cutting of structural 20 mm thick steel with regard to the type of material, the resulting roughness of the cut and the resulting price of the product. In line with the literary study and the Taguchi method, an experiment was developed. The cutting speed, laser performance, cutting gas pressure, and focal position were controlled during the experiment. Sample sets were cut with 7.5" and 10" focusing lens from the TATA STEEL S355MC and SSAB LASER 355 MC steels. According to ČSN EN ISO 9013, the samples were evaluated for roughness. Then micro and macro structures were evaluated, and compare the hardness according to Vickers. In conclusion, technical and economic evaluation was determined.

This dissertation thesis is focused on the evaluation of the dissolved gas analysis in the power oil transformer diagnosis. This thesis derives from known, in standards, directives and literature shows realities which are fill in new pieces of knowledge as determining of gases important for evaluation of the transformer condition, specifying of current methods accuracy and investigating of accuracy change for interpretation of dissolved gases. The part of this thesis is the application of mathematic methods for detailed description of individual transformer failures and determining of dominant gas which are generating in power oil transformer. Obtain conclusion will be contribution for transformer diagnostics and will be applicable in industrial practice.