Master thesis deals with static analysis of construction of hall type for waste treatment. Thesis includes design and structural assessment of main support elements of construction. This is two-aisled combined skeleton object. The roof system is composed of steel truss structure.

The subject of the diploma thesis is an architectural study of a velodrome in Brno Komárov. It is an indoor cycling track which is still missing in the Czech Republic. The whole site of the Hněvkovského sports complex in Komárov was elaborated within the architectural study. The aim of the proposal was to attract a wide range of visitors to the site, so not only buildings for sports were designed. But also two sets of buildings as a modular construction from containers providing premises for rent. The construction of the velodrome was deign as a combination of monolithic reinforced concrete and steel truss structure. The cladding is design from insulated panel system.

The aim of the diploma thesis is to construct a steel shopping mall hall. The construction is located in Frýdek-Místek. The whole object can be divided in two parts. One part of the building is an atrium with a cross bridge made from glass. The roof construction of the atrium is designed as system of cylindrical lattice girders within purlins are set up. The other part of the construction is multistoried shopping mall with terrace designed as composite steel and concrete structure. The whole ground plan size of the construction is 72 m x 120 m. The height of the construction above the ground is 12.06 m. The cross-links are built up to 6 m one. There were created two versions of the construction. The most convenient version is described in more details. The outcome of the thesis is a comparison of two above mentioned versions. The whole project is based on officially recognised standard ČSN EN. The construction was designed in RFEM programme.

The diploma thesis deals with design of structural system of selected parts of load-bearing structure of car park – common floor slab, selected columns, staircase. The Finite Element Method software is used to analyse the load-bearing structure, the results are verified by simlyfied hand-done calculation. The design of structures is done according to valid standards.

Master´s thesis is focused on the design and assessment of reinforced concrete load-bearing structure of a detached house. The supporting structure model is processed in SCIA Engineer. Selected reinforced concrete elements are assessed in accordance with ČSN EN 1992 - 1 -1. Part of the thesis is a technical report and drawings of the shape and reinforcement.

The aim of this diploma thesis is the processing of selected parts of the construction technology project for the New office and manufacturing building of GRADIOR TECH a.s. The building is located in the Královopolská industrial park in Brno - Královo pole. The construction is divided into 6 buildings. The indicative time and financial plan focuses on the building as a whole. Furthermore, the diploma thesis focuses in detail on the construction technology project project in detail on the building of the office building, which is based on drilled piles. On these piles, the cup feet for pillar fitting are placed on which the beams are fitted together with frames and ceiling panels. The building is diverse and contains both prefabricated and monolithic structures.

This Diploma´s thesis proceses topic Pension for Seniors. The object is situated in Božetěchova street in Brno-Královo Pole. This house is new building, three-floored and partial basemented. Basement is a technical floor. On the first floor are spaces of services and offices. On the second and the third floor are situated twenty-eight flats. Shape of the house is „L“ and its basic dimensions are 39,0 x 38,0 meters. The building is finished with a single layered flat roof. Height of house is 10,715 meters. The base structures is of conrete C16/20. The bearing walls on 1S are of monolithic reinforced concrete. Other Bering construction system is used of Porotherm. The staircase structure consists is of monolithic reinforced concrete.

The study design includes a main directorate of the Grand Prix Brno. There are spaces designed for administration (office management circuit, meeting room, secretarial services, tec.), riders (relaxation room, garage), the commissioner and start providemaintenance and safe operation of the circuit, VIP lounges and media hall. Building is an oval dynamic shape, created of steel construction and skeleton with light cladding combined with fresh glass facade. Central part of object is designed in main axis of autodrome. Functional change in solved area was constituted by creating a corridor between main entrance into an areal, used by public. This corridor was connected with driveway to paddocks. The proposal is designed to meet safety criteria, but also manager to evoke good atmosphere of racers and visitors.

The thesis called Block of Flats in Prague 6 is composed as a project documentation of the static part. This six-level building was designed as a ferroconcrete monolithic object. Two underground floors are formed by a ferroconcrete frame with columns. There are placed parking slots and also a residential section on these two floors. Four other levels are designed as a ferroconcrete frame with walls. These four floors serve as a residential section. The thesis deals with the complete design of the first floor of one structural unit of the building, and also with some details such as floor slab, bearers, staircase, columns, and walls.

Master thesis „Multifunctional Building“ is composed in the form of project documentation. Designed building is situated close to the Svitava river. The supporting structure in the basement is designed from shutter shaped pieces Best and the other storages from the system Ytong. The armoured concreted slab is designed for the ceilings. The roof is drawn as platform. The whole building will be insulated for recommended values. The facade in the first storage is designed as ventilated Novabrick and in the other storeys the facade will be from plaster Cemix. The building has three storages and partly basement. The building consists of centre for rehabilitation, shop and three flats. The drawings are compiled in CAD program.