Subject of the solution master´s thesis is new domestic building. It is two floors building made out of construction system Porotherm with monolithic ferronconcrete ceilings and shed roof. First floor has two versions.In first version is four studio flats. Second version on the first floor is used for accommodation disabled people and there are three apartments and one unit with facilities for carers. Second floor is used for accommodation two smaller families and there are two apartments with entrance from gallerie. Building is located in straight terrain in the development area of new houses in Žatec in area Kamenný vrch.

The thesis dealt with newly built detached house for seniors. The building is designed in the village Drnovice, Blansko district. House for seniors has one basement and three floors. In the basement are designed therapeutic ingredients such as physiotherapy, massage, gym and the appropriate sanitary facilities. Further there are technical facilities, sanitary facilities and lockers for employees. The first floor is designed to entry, reception, library, lounge, dining room and other spaces. Second and third floor is designed for living. Dimensions of the maximum contour of the house are 55,14 x30,34 m. Foundations are of strip footings of plain concrete C16/20. The thickness of the base concrete slab is 150mm and is reinforcer with KARI networks 100/100/6. The building is made of Heluz system, perimeter basement walls is made of the BTB fittings. The staircase is a reinforced concrete slab. The roof of the house is flat, single.

The topic of this dissertation is a new building of Multifunctional building in Třebíč on parcelas number 1237, 1238, 1239. The Multifunctional building is situated on nursery sloping terrain. It´s designed as a four-floor house without a cellar. Ground plan size of the object are 15,35 m x 44,3 m. Parapet is situated 12,95 m high over the first floor. The building is build on a concrete foundations. From the point of view of construction the building is combination of a concrete breeze-block which are in ground floor and ceramic breeze-block which are in another floor of the building. Ceiling is designed from prefabricated filigran floor slab produced out of special liapor concrete. Staircase is iron-concrete with ceramic pavement. The object is roofed with flat roof which is drain of water using roofdrain.

The Master’s thesis Office building is compiled in the form of project documentation witch comprises all the requisites required by current regulations. The designed building is placed on the sites numbered 2589/1 in Litomerice. This is a new building withoutbasement with four floors. The house is rectangular in plan, built of precast reinforced concrete frame system with infill masonry and roofing flat roof monotube roofing.

Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.

In this thesis is solved detail design of industrial building. It is a new storage hall and connected to it the two-story office building. Building is located in the production area of factory, on the cadastral area Holice u Olomouce. The purpose of the building is storage and expedition of the products. In areas of an office building is located facilities for staff of hall and office workspace. Handling products in the hall will be performed by a forklift. The building is designed for a capacity of 15 employees. The office building has a load bearing structural system. Walls and ceiling structures are made up of panels of filigree. Foundations, including flooring of the first floor, are constructed from waterproof concrete. The office building is roofed by flat roof. The main supporting structure of the storage hall is designed as precast reinforced concrete frame. Cladding consists of insulating panels. Like in the office building, the hall is roofed by flat roof. Due to anticipate of the differential settlement of the office building and the storage hall parts are separated by a dilatation joint.

Theme of this diploma thesis is a newly buil building of prison in Moravské Budějovice. The buiding has four ground floors and is without cellar. The structural system of the building is made up of permanent formwork and system Porotherm. Ceiling construction is made up of reinforced hollow core slab. The building is covered with a flat roof.

The thesis focuces on project documentation for a construction project with the aim to design home for children under institutional care. Located on the outskirts of Skuteč, the building is three-storey, detached and partially basemented. The basement area lays on the slab foundations and the first floor on strip foundations. Vertical structures are made of ceramic blocks and local reinforced concrete columns while horizontal structures are made of reinforced concrete slabs and wooden trusses over the gym. The building is covered by a vegetated flat roof. The building houses six residential units for six family groups with a total capacity of 43 children. The basement includes gym and fitness with technical facilities. The first floor consists of three residential units, changing rooms for the gym and kitchen with facilities. The second floor houses remaining three residential units, offices and the refectory. The upper floor is used for children´s education and entertainment.

The thesis deals with the design of a two-storey L-shaped smart building for amenities with a low energy consumption concept in mind. The ground floor will be used as a café and technical facilities. The second floor is designed for a small design office. The first part of the thesis is devoted to the architectural and structural design. The selected load-bearing system is a wall system made of Silka sand-lime blocks. The floor and roof are designed of prestressed reinforced concrete panels Spiroll. Stone wool is used as the main thermal insulation. The flat roof is designed green extensive. The second part of the thesis deals with the building environment technology, which will use energy from photovoltaic panels and will be supplied with heat from a local central heat source. Air exchange is provided by two HVAC units. Cooling is designed as a VRF system with refrigerant. The third part of the thesis deals with the acoustic assessment. The main topic is optimizing the reverberation time in the open space office. For the preparation of the thesis, the Archicad and Autocad software, MS Excel and Word or Deksoft were used.

The scope of this diploma thesis is design and processing of the project documentation of the guesthouse along with coffee shop. The proposed object of this thesis is located in the village Čeladná next to the golf course Prosper Golf Resort Čeladná, in the location designated for mixed constructions. One of the double-storeyed, non-cellular object with roofed surface and steep roof. The object is based on the base stripes made of plain concrete and on the reinforced concrete flaps. Carrying, perihepral and dividing walls are designed on the Velox systém. The same systém was used to design roof constructions. In the rooms with excessive width are filled with reinforced concrete columns. Part of the guesthouse and second floor of the coffee shop is designed with ventilated facade with wood paneling ThermoWood. The object is divided in two parts with common entrance section. One part of the coffee shop has ability to handle capacity of 70 guests. Part of the double-storeyed coffee shop is hygienic facilities, kitchen, room for employees, warehouse and mechanical ventilation. Second part of the object is the guesthouse with flat of the manager of the guesthouse. The guesthouse consists of room with hygienic facilities for 18 people, including barrier-free room. The rooms are divided in the first floor on separate units, the rooms with hygienic facilities and the apartments in the second floor has two rooms, kitchen and hygienic facilities. For the next parts of the guesthouse is warehouse clean and dirty laundry and shared kitchen. The whole first floor is designed as barrier-free. In front of the object is the parking lot for 21 cars, which 3 of the parking places are for the cars of the disabled.