This diploma thesis presents a project documentation for construction of a community centre with a restaurant. Its construction site is located on the outskirts of town Jaroměřice nad Rokytnou, Poděbradova street. The building is composed from three parts, which are connected to each other. The first part houses the restaurant with its facilities. This part is a single floor structure covered by a flat green roof. Its façade is formed by white boards composed into an asymmetrical pattern. The second part serves as a backstage area where all the necessary facilities are located. This second part of the building is as the first part a single floor structure covered by a flat green roof. Its façade is formed by façade timber boards. The main entrance is located in the middle part, which is the third part the building. It has two floors and it houses an auditorium, a bar and amenities. Its façade is formed by trapezial boards. The construction system is formed by load bearing walls and by prestressed concreted floor panels or in some parts by cast-in-place reinforced concrete slabs. The building has strip foundations. Its interior walls are built from sand-limestone bricks with acoustic properties. The perimeter walls are covered with ventilated façade with mineral wool thermal insulation. The heating of the community centre is powered by gas boiler connected to single-vent chimney with ventilation shaft.

Diploma thesis is about design and making of execution project for office city building which is located in Nový Bydžov. The building is located in the late brownfield area of Dufek´s wood manufacture, which is on the south part of Nový Bydžov. The building has four above ground floors and one below ground floor. The building shape is rectangular of dimensions 53,02 x 17,62 m. On the south, west and east is the façade from height of second floor slightly cantilevered. On the east part the edge of cantilevered façade duplicate slopping edge of the bottom land and it creates wonderful but economical shape. The height of the building from the ground is 14,5 m. The shape of roof is flat, covered with the mPVC foil and gravel mound. Façade which covering the first ground floor is made of polystyrene with thin layer of plaster which creates building plinth. Top cantilevered façade is made of ceramic tiles of dimensions 1200 x 600 mm which are suspended behind the air layer. The ceramic tiles are light brown color. In the bottom part are glazed areas of rectangular and square shapes to create the open feeling in the ground floor. In the rear part is designed coffee bar with nice outside wooden terrace. Windows in the top cantilevered part of the façade are the circular shape and extend the architectural impression of the building. All windows are in the same color of dark blue. The steel parts of the building are also dark blue color. In the bellow ground floor are designed underground parking lot with the maximum capacity 29 cars and technical equipment. In the first floor above ground are designed reception, big lecture hall, exhibition hall, coffee bar with terrace and toilets. In the second floor above the ground are offices, computer room and HVAC equipment. In the third above floor are offices, conference hall, and IT equipment. In the fourth floor above the ground are also offices, maintenance room and storage of furniture.

The topic of this diploma thesis was to design a winery house in the open landscape in a traditional wine landscape of Mikulov. The designed building serves as a four stars hotel with apartment rooms, restaurant, wellness, wine shop and a small wine farm with a storage of wine. There are unique views to the Mikulov city, Turold hill and surounding vineyards. The longitudinal axe is oriented on northeast–southwest. Majority of rooms, terraces and both atriums are directed on prospective axes. The object has one basement and three groundfloors. It is (situated) into the sloping terrain and constrasts with the wavy landscape of Mikulov for its racional and linear conception. It is inspired by terracced formations in near suroundings and uses it for its mass as well. It creates a new landscape dominant that remainds the geological formation of limestone situated in the surroundings of the Mikulov city. The regular rhytm of windows on facade refers to the Mikulov´s renaissance. The regular placement of window openings, and their rhythm are inspirated by Mikulov renaissance. Smaller holes, glass surfaces, light color of facade, green roof and shielding elements prevent from overheating the object during the summer. The water element in the courtyard offers pleasant refreshment for the visitors.

Master thesis high-rack storage area spo - selected parts of ctp covers technological studies throughout the building, the construction division, building and engineering structures, preparation of normal technology, mechanical engineering time and financial plan. Also master thesis focuses more on building a major object of the building, which is the storage, dispatch and administrative part of high-rack storage area spo. Building on this subject is further developed such documentation and other documents that complement and prescribe requirements for faster, easier, safer, better and technologically accurate realization of this phase.

Project documentation of garni hotel with wellness service of one basement and three floors from reinforced concrete monolithic skeleton, filled with masonry POROTHERM, horizontal structures prefabricated panels HELUZ, roofed by single-layers flat roof and sloping roof with wooden eaves and metal roofing.

Subject of master's thesis is project of health centre in Brno. The building is constructed as a frame of reinforced concrete with four above-ground floors. The building is based on square individual footing and uncased piles. Building envelopes consists of supporting part and thermally isulated part. Supporting part is made of earated concrete block Ytong. Thermally isulated part is made of thermal insulation polystyrene and Kingspan panel facade cladding. Building is roofed with vegetative promenade flat roof with 3-meters-high trees. Part of master's thesis is also a static desing of reinforced concrete components, fire-safety solving and thermal-technical evaluation og building.

The theme of my disseration is an architecture study of multifunctional building which is surrounded by the streets Vranovská, Cejl and Jana Svobody and by the embankment of the river Svitava. Objective of the study was to design a building that would utilized the space of the plot effectively. The result of design is the construction which is characterized for its inner semi-public atrium space with link to the bank of Svitava and street Jana Svobody. It is five-storey house. In the first two stories there are different feature amenities (kindergarden, office building, restaurant, café, media library, gallery and other shops), and senior house. In the third floor and above there are designed flats for living. The part of the living area was also creating of new kind of housing called co-housing. The building has a basement, which is mostly for parking. The construction of the building is from monolithic reinforced concrete frame, horizontal structure consists of beamless slabs. Due to the huge area of the building, the facade is designed from the different kinds of materials: white plaster, light gray sheet metal, anthracite metail mesh and glass fiber.

Master´s thesis named Construction technology project of production facility of Brno papermill s.c. is focused od technological preparation and realization of production facility itself. Main goal is to design time, financial, human and material sources. All these aspects were designed according to project documentation for construction permit.

This thesis deals with the Nursing home in the city of Prostějov. The object includes 36 one room flats and 2 three room flats. There are proposed another equipments which are related to nursing services such as two surgeries, rehabilitation, massage salon, coffee bar and hairdressing salon in the building. The hole building was designed as accesible. The object is two storied, cellarless and its grand plan is indented. It is staffed on plane plot in a quiet area of apartment blocks. There are going to be build new road, parking places and surfaces outside. The roof is designed as flat single casing or double casing. The main structure system is designed as walls of ceramic blocks and ceiling of reinforced concrete. All of the flats are situated on the southern side and the entrances are situated on the northern side.

This thesis deals with proposal detached three-storey office building, which consists of the brick section and monolithic reinforced concrete frame. The building is covered with a flat roof. The design focus is on the overall consistency between spatial, structural, static, fire safety, acoustic and thermal technical requirements. Documentation is prepared for the building construction. The graphical part of documentation has been processed in the AUTOCAD software.