The aim of this master’s project is to develop project documentation of a new-built mountain hotel in Ostružná. This hotel is near the ski area Ramzová in Jeseníky. Foundation of my building is from ground reinforced concrete slab. My building is supported by clay block load-bearing walls and clay non-load bearing walls. Exterior building envelope is designed as an aluminum shingle ventilated facade. The slabs are from reinforced concrete. The roofs of this designed building are two, first is pitched roof with insulation over rafters and second is intensive green warm flat roof. This project contains HVAC concept, photovoltaic panel concept, heating concept in technical equipment of building part. The third part of my master’s project is energy assessment for the building.

The aim of this diploma thesis is a solution of the extension of clinical hematology of the Faculty Hospital Brno. The thesis deals with the technological regulation for steel construction, coupled ceiling concrete slab with other topics including an inspection-check plan, a time schedule for carcass, time and financial schedule for structures and an item budget. In addition, this work includes the coordination site-layout of the construction with wider transport relations, mechanical assembly, the principles of the organization of site equipment and occupational safety and health risks. Finally this thesis contains several assessments for cranes, scheme of principles of fixing steel columns into structure, scheme of laying building envelope, LEED, site equipment financial assessment.

Thesis Theme is a primary school, namely the outbuilding primary school Havlíčkův Brod, Konečná 1884. I suggest first grade pavilion and pavilion with school canteen with kitchens. Pavilions are based on the footings. Pavilions are designed as a two-way system from the wall HELUZ. Construction of ceiling are from ferroconcrete slabs are cross reinforced, single-layer roof is flat with a classic sequence of layers. In addition to construction and process layout I solved also the statics of building in specialize of concrete structures. The following are also evaluated heat and acoustic requirements and requirements for fire safety of buildings. New pavilions are solved as wheelchair accessible. Pavilion of the first grade has two floors with 5 classes of stem, 1 vocational and 2 classes are earmarked for after-school clubs. This pavilion is connected to the connecting neck between the former pavilon A and pavilion B. Dining pavilion has one floor, which is divided in the school canteen and kitchen is connected to the connecting neck leading to the gym. The land is mildly sloping to the south side. All consstructions comply with the applicable standards and recommendations ČSN.

The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.

The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors

This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.

Diploma thesis is focused on the description of the parameters of nonlinear material models of concrete, which are implemented in a computational system LS-DYNA, interacting with performance of nonlinear test calculations in system LS-DYNA on selected problems, which are formed mainly by simulations of tests of mechanical and physical properties of concrete in uniaxial compressive and tensile on cylinders with applying different boundary conditions and by simulation of bending slab, with subsequent comparison of some results of test calculations with results of the experiment. The thesis includes creation of appropriate geometric models of selected problems, meshing of these geometric models, description of parameters and application of nonlinear material models of concrete on selected problems, application of loads and boundary conditions on selected problems and performance of nonlinear calculations in a computational system LS-DYNA. Evaluation of results is made on the basis of stress-strain diagrams and load-displacement diagrams based on nonlinear calculations taking into account strain rate effects and on the basis of hysteresis curves based on nonlinear calculations in case of application of cyclic loading on selected problems. Verification of nonlinear material models of concrete is made on the basis of comparison of some results of test calculations with results obtained from the experiment.

This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.