The aim of this work is to create a unified control and supervision system, SCADA, for controlling the heating and cooling of the company. The system is controlled by UniPi PLC units. Node-RED is used as control software. The user interface is created by an extension "dashboard". For communication between elements using the MQTT protocol. The InfluxDB database is used for data storage. The Grafana tool is used to visualize historical data. The majority of the created system consists of open software. The system is universal, expandable and it is possible to connect it with another system. The system can be used or adapted to similar problems of advanced heating control.

The 1-wire bus is a communication bus system which is designed to provide data, signals and power over a single signal with low data rates, a high resolution and a long range. It is typically used to communicate with small inexpensive devices, as temperature sensors, which is worked as a slave with the master computer (PC). The 1-wire bus system provides the sufficient control and operation signal, a unique ID serial number of each sensor and it supports multiple temperature sensors by a driving power (Parasite Power) on single line. On the 1-Wire bus system, temperature sensors are supplied by two types of power supplies, external Power supply and Parasitic Power. The aim of this project is to program the microprocessor (Arduino) by using Arduino programming language to work as a temperature sensor type DS18B20 and also as a slave on the 1-Wire bus system. This report explains the 1-Wire bus system techniques and how the communication is achieved between the master and the slave (sensors) to measure the temperature values. The measured temperature values are collected from the output of each active sensor on the 1-Wire bus. These data are displayed by the personal computer (PC) which is worked as a master on the 1-Wire bus, and the data are represent the measured temperature values from twelve active sensors on the bus system. In this thesis, the temperature values from the 12 active sensors can be read and displayed on the master (PC) by using the following programs: Open Logger One Wire (OLOW) program, One Wire Viewer, DigiTemp and OWFS and I validated all the temperature values from these active sensors which are read and monitored by the drive bus programs. The comparison is done among the measured temperature values to see if the active sensors are given accurate temperature values with different drive bus programs. The project shows that the sensors can be connected in a network with the master, by using 1-Wire bus techniques. This thesis will be used by Karolinska University Hospital, and it can also be developed for different requirements in the future.

This thesis is based on the design and production of teaching kits with expansion modules which are based on the Atmel AVR microcontroller. Kit consists of a plate containing processes and basic power modules directly on the board and expansion modules "SIMAČ". "SIMAČ" modules are virtual elements that simulate the real elements and they are commonly used in industrial automation. Because of their cost they are integrated in extension kit as programmable modules. It also contains basic theoretical information about working with ATMEL AVR microcontrollers. Expansion modules with module development board and disc which will be loaded all the schemes, programs and technical documentation for individual districts will be attached to the thesis.

This master's thesis is concerned about embedded system for automatic water renewal in aquariums. Besides water renewal system also controls lights and ventilation in aquarium fish breeding station. In this report you will find informtions about technology relevant to automation of aquarium fish breeding station. Also you will find here informations about design and implementation of my specific final working solution.

This thesis deals with the measurement of physical quantities in building using decentralized system for data collecting. The system consists of Raspberry Pi as a master device of the system. There are three branches connected to this master device. Each branch consists of up to 32 modules for data-concentration from sensors of physical quantities. The Raspberry Pi has implemented web interface for displaying measured values and system administration.

Master’s thesis deals with a design and a realization of multifunction board computer for motorcycles. The goal of the device is measuring speed, rotation speed of engine, temperature of ambient, temperature of engine, temperature in intake including signalization of overvoltage and hightemperature. The device is completed by above standard function such as measuring titl of motorcycle, climbing of route, route recording and data transmission to the computer. The thesis includes a complete solution of hardware and software part of the device.