Spelling suggestions: "subject:"290702 mineral aprocessing"" "subject:"290702 mineral eprocessing""
1 |
Modelling of the performance of grates and pulp lifters in autogenous and semi autogenous millsLatchireddi, S. Unknown Date (has links)
No description available.
|
2 |
Using the floatability characterisation test rig for industrial flotation plant designColeman, Robert Gerald Unknown Date (has links)
Flotation is the separation process most used to recover valuable minerals from sulphide ores. The design of industrial flotation plants is a complex process involving many stages. Current design practice involves performing laboratory scale grinding and batch flotation tests, followed by a circuit design based on the scale-up of the laboratory kinetics and recovery-grade data. A pilot plant is then operated to evaluate the performance of the circuit based on recovery and grade, usually in the configuration of the intended full-scale plant. The circuit design is refined and economically evaluated after which the design of the full-scale plant is performed. A new approach to full-scale flotation plant design has been proposed by the Julius Kruttschnitt Mineral Research Centre and the Mineral Processing Research Unit of the University of Cape Town, as part of the Australian Minerals Industries Research Association (AMIRA) P9 Project. In this new methodology, the effects of the ore on plant performance are decoupled from the circuit effects. The ore properties are characterised by operating the pilot plant in as simple a configuration as possible. The pilot plant units are configured to perform a similar duty (in terms of mineral content and particle size) to the full-scale operation and their response measured. An important factor in the success of the methodology is having a pilot plant that is capable of accurately characterising the ore properties. For this purpose, the Wemco® Floatability Characterisation Test Rig (FCTR) was built. The FCTR is a self-contained, highly instrumented mobile pilot plant designed to develop and validate the new flotation plant design methodology. The aims of this thesis were to propose, develop and validate a methodology for using the FCTR to design industrial flotation plants. The hypothesis was that full-scale flotation plant design could be accurately performed using the P9 flotation model and modelling and scale-up methodologies, in conjunction with the FCTR. Test work was performed in three main areas: calibration of the ore characteristics and model parameters for the flotation model currently used by the AMIRA P9 Project; validation of the flotation model and modelling methodology; and prediction of full-scale plant performance using parameters determined on the FCTR. The ore floatability characteristics were calibrated using four FCTR circuits of increasing complexity. The ore floatability characteristics were determined for various models derived from data from one, two, three and four calibration circuits. Validation of the flotation model and modelling methodology was performed using three validation methods: internal validity tests, parameter sensitivity tests and predictive validation. From the internal validity tests, some of the models did not meet the validation criteria. The parameter sensitivity tests used Monte Carlo simulations to determine the sensitivity of the regressed model parameters. The tests produced small differences in the values determined from the models and the average values from the Monte Carlo simulations. The floatability characteristics appeared to be stable and unique. Predictive validation was performed using five FCTR circuits, different in configuration to the calibration circuits. The predictive validation was performed using the floatability characteristics determined from each of the calibration models, in conjunction with estimates of the model parameters. Overall, the predictions of the circuit performance were accurate and within experimental standard deviations for most streams in the circuits. The predictions of the key parameters of pentlandite and chalcopyrite recovery were accurate, especially for the final concentrate. The prediction of pyrrhotite recovery produced the largest errors. The prediction of pyrrhotite recovery appeared to be dependent on the addition of depressant to the cleaner and recleaner circuits of the circuit to be predicted. When the depressant addition rates were significantly different from those used in the calibration circuits, the prediction of pyrrhotite recovery was inaccurate. These errors were however reduced when experimental water recovery values were used. The extensive and robust validation of the flotation model and modelling methodology has shown that the flotation model and modelling methodology are valid under certain conditions. This test work represents the first comprehensive validation of the flotation model and modelling methodology incorporating changes in circuit configuration. Using the proposed modelling and scale-up methodology in conjunction with the FCTR, the metallurgical performance of three industrial flotation circuits were predicted. The predicted results were then compared to the experimentally determined results around the industrial circuits. In each case, a scale-up factor between the ore floatability characteristics determined on the FCTR, and the full-scale floatability characteristics, was required to achieve an accurate prediction. The scale-up factor ranged from 0.17 to 0.97 for the case studies investigated. In light of the results from each stage of test work, the proposed flotation plant design methodology was refined. With this methodology and the continual development of techniques for the measurement and prediction of the P9 flotation model parameters, accurate industrial plant design using the FCTR will become possible. With the addition of other unit operations, such as comminution, into the flowsheet, this methodology will eventually lead to the achievement of the ultimate goal of accurate plant design of green-field sites.
|
3 |
Using the floatability characterisation test rig for industrial flotation plant designColeman, Robert Gerald Unknown Date (has links)
Flotation is the separation process most used to recover valuable minerals from sulphide ores. The design of industrial flotation plants is a complex process involving many stages. Current design practice involves performing laboratory scale grinding and batch flotation tests, followed by a circuit design based on the scale-up of the laboratory kinetics and recovery-grade data. A pilot plant is then operated to evaluate the performance of the circuit based on recovery and grade, usually in the configuration of the intended full-scale plant. The circuit design is refined and economically evaluated after which the design of the full-scale plant is performed. A new approach to full-scale flotation plant design has been proposed by the Julius Kruttschnitt Mineral Research Centre and the Mineral Processing Research Unit of the University of Cape Town, as part of the Australian Minerals Industries Research Association (AMIRA) P9 Project. In this new methodology, the effects of the ore on plant performance are decoupled from the circuit effects. The ore properties are characterised by operating the pilot plant in as simple a configuration as possible. The pilot plant units are configured to perform a similar duty (in terms of mineral content and particle size) to the full-scale operation and their response measured. An important factor in the success of the methodology is having a pilot plant that is capable of accurately characterising the ore properties. For this purpose, the Wemco® Floatability Characterisation Test Rig (FCTR) was built. The FCTR is a self-contained, highly instrumented mobile pilot plant designed to develop and validate the new flotation plant design methodology. The aims of this thesis were to propose, develop and validate a methodology for using the FCTR to design industrial flotation plants. The hypothesis was that full-scale flotation plant design could be accurately performed using the P9 flotation model and modelling and scale-up methodologies, in conjunction with the FCTR. Test work was performed in three main areas: calibration of the ore characteristics and model parameters for the flotation model currently used by the AMIRA P9 Project; validation of the flotation model and modelling methodology; and prediction of full-scale plant performance using parameters determined on the FCTR. The ore floatability characteristics were calibrated using four FCTR circuits of increasing complexity. The ore floatability characteristics were determined for various models derived from data from one, two, three and four calibration circuits. Validation of the flotation model and modelling methodology was performed using three validation methods: internal validity tests, parameter sensitivity tests and predictive validation. From the internal validity tests, some of the models did not meet the validation criteria. The parameter sensitivity tests used Monte Carlo simulations to determine the sensitivity of the regressed model parameters. The tests produced small differences in the values determined from the models and the average values from the Monte Carlo simulations. The floatability characteristics appeared to be stable and unique. Predictive validation was performed using five FCTR circuits, different in configuration to the calibration circuits. The predictive validation was performed using the floatability characteristics determined from each of the calibration models, in conjunction with estimates of the model parameters. Overall, the predictions of the circuit performance were accurate and within experimental standard deviations for most streams in the circuits. The predictions of the key parameters of pentlandite and chalcopyrite recovery were accurate, especially for the final concentrate. The prediction of pyrrhotite recovery produced the largest errors. The prediction of pyrrhotite recovery appeared to be dependent on the addition of depressant to the cleaner and recleaner circuits of the circuit to be predicted. When the depressant addition rates were significantly different from those used in the calibration circuits, the prediction of pyrrhotite recovery was inaccurate. These errors were however reduced when experimental water recovery values were used. The extensive and robust validation of the flotation model and modelling methodology has shown that the flotation model and modelling methodology are valid under certain conditions. This test work represents the first comprehensive validation of the flotation model and modelling methodology incorporating changes in circuit configuration. Using the proposed modelling and scale-up methodology in conjunction with the FCTR, the metallurgical performance of three industrial flotation circuits were predicted. The predicted results were then compared to the experimentally determined results around the industrial circuits. In each case, a scale-up factor between the ore floatability characteristics determined on the FCTR, and the full-scale floatability characteristics, was required to achieve an accurate prediction. The scale-up factor ranged from 0.17 to 0.97 for the case studies investigated. In light of the results from each stage of test work, the proposed flotation plant design methodology was refined. With this methodology and the continual development of techniques for the measurement and prediction of the P9 flotation model parameters, accurate industrial plant design using the FCTR will become possible. With the addition of other unit operations, such as comminution, into the flowsheet, this methodology will eventually lead to the achievement of the ultimate goal of accurate plant design of green-field sites.
|
4 |
Using the floatability characterisation test rig for industrial flotation plant designColeman, Robert Gerald Unknown Date (has links)
Flotation is the separation process most used to recover valuable minerals from sulphide ores. The design of industrial flotation plants is a complex process involving many stages. Current design practice involves performing laboratory scale grinding and batch flotation tests, followed by a circuit design based on the scale-up of the laboratory kinetics and recovery-grade data. A pilot plant is then operated to evaluate the performance of the circuit based on recovery and grade, usually in the configuration of the intended full-scale plant. The circuit design is refined and economically evaluated after which the design of the full-scale plant is performed. A new approach to full-scale flotation plant design has been proposed by the Julius Kruttschnitt Mineral Research Centre and the Mineral Processing Research Unit of the University of Cape Town, as part of the Australian Minerals Industries Research Association (AMIRA) P9 Project. In this new methodology, the effects of the ore on plant performance are decoupled from the circuit effects. The ore properties are characterised by operating the pilot plant in as simple a configuration as possible. The pilot plant units are configured to perform a similar duty (in terms of mineral content and particle size) to the full-scale operation and their response measured. An important factor in the success of the methodology is having a pilot plant that is capable of accurately characterising the ore properties. For this purpose, the Wemco® Floatability Characterisation Test Rig (FCTR) was built. The FCTR is a self-contained, highly instrumented mobile pilot plant designed to develop and validate the new flotation plant design methodology. The aims of this thesis were to propose, develop and validate a methodology for using the FCTR to design industrial flotation plants. The hypothesis was that full-scale flotation plant design could be accurately performed using the P9 flotation model and modelling and scale-up methodologies, in conjunction with the FCTR. Test work was performed in three main areas: calibration of the ore characteristics and model parameters for the flotation model currently used by the AMIRA P9 Project; validation of the flotation model and modelling methodology; and prediction of full-scale plant performance using parameters determined on the FCTR. The ore floatability characteristics were calibrated using four FCTR circuits of increasing complexity. The ore floatability characteristics were determined for various models derived from data from one, two, three and four calibration circuits. Validation of the flotation model and modelling methodology was performed using three validation methods: internal validity tests, parameter sensitivity tests and predictive validation. From the internal validity tests, some of the models did not meet the validation criteria. The parameter sensitivity tests used Monte Carlo simulations to determine the sensitivity of the regressed model parameters. The tests produced small differences in the values determined from the models and the average values from the Monte Carlo simulations. The floatability characteristics appeared to be stable and unique. Predictive validation was performed using five FCTR circuits, different in configuration to the calibration circuits. The predictive validation was performed using the floatability characteristics determined from each of the calibration models, in conjunction with estimates of the model parameters. Overall, the predictions of the circuit performance were accurate and within experimental standard deviations for most streams in the circuits. The predictions of the key parameters of pentlandite and chalcopyrite recovery were accurate, especially for the final concentrate. The prediction of pyrrhotite recovery produced the largest errors. The prediction of pyrrhotite recovery appeared to be dependent on the addition of depressant to the cleaner and recleaner circuits of the circuit to be predicted. When the depressant addition rates were significantly different from those used in the calibration circuits, the prediction of pyrrhotite recovery was inaccurate. These errors were however reduced when experimental water recovery values were used. The extensive and robust validation of the flotation model and modelling methodology has shown that the flotation model and modelling methodology are valid under certain conditions. This test work represents the first comprehensive validation of the flotation model and modelling methodology incorporating changes in circuit configuration. Using the proposed modelling and scale-up methodology in conjunction with the FCTR, the metallurgical performance of three industrial flotation circuits were predicted. The predicted results were then compared to the experimentally determined results around the industrial circuits. In each case, a scale-up factor between the ore floatability characteristics determined on the FCTR, and the full-scale floatability characteristics, was required to achieve an accurate prediction. The scale-up factor ranged from 0.17 to 0.97 for the case studies investigated. In light of the results from each stage of test work, the proposed flotation plant design methodology was refined. With this methodology and the continual development of techniques for the measurement and prediction of the P9 flotation model parameters, accurate industrial plant design using the FCTR will become possible. With the addition of other unit operations, such as comminution, into the flowsheet, this methodology will eventually lead to the achievement of the ultimate goal of accurate plant design of green-field sites.
|
5 |
The relationship between froth recovery and froth structureSchwarz, Sarah January 2004 (has links)
The flotation process has been used and extensively researched over the past 100 years; however some aspects still remain a great mystery. While most research in the past has focussed on the pulp phase of the process, recently there has been a significant trend towards investigating the froth phase. This study focuses on the froth phase and investigates the processes that occur within this zone in a well defined and controllable system under particular operating conditions, namely changes in frother type and concentration, as well as particle type and concentration.
|
6 |
Selective transport of attached particles across the froth phaseSeaman, David Richard Unknown Date (has links)
Over many years, researchers in the field of flotation have developed an in-depth understanding of processes occurring in the pulp phase of flotation machines. Until recently, however, the froth phase has received little attention. The froth phase serves to separate bubble-particle aggregates from suspended slurry in a flotation cell. The mechanism of recovery by entrainment, its relationship to water recovery and particle size dependency is well understood. Froth recovery, (the fraction of particles entering the concentrate launder that entered the froth phase attached to air bubbles), is not well understood. Up until now, there has been doubt over whether this property is dependent on particle size and hydrophobicity. Difficulties in measuring froth recovery had previously prevented researchers from gaining a deeper understanding of the transport of attached particles across the froth phase. A novel device was designed and tested to measure froth recovery by isolating bubble-particle aggregates in the pulp-phase of flotation machines through the determination of the bubble loading in the pulp phase (mass of particles attached per unit volume of air bubbles). This technique can be used with other measurements to investigate froth selectivity by directly comparing these captured particles to those found in the froth phase. Evidence was collected at Red Dog Mine, Alaska and Newmont Golden Grove Operations, Western Australia which showed that the froth phase selectively transported more hydrophobic and smaller sized particles across the froth than less hydrophobic and larger particles. Particles collected in the device were compared to those found in the concentrate stream on a size by mineral by liberation class. Froth recovery was also calculated on a size by mineral by liberation class for two valuable sulphide minerals in a continuous 3m³ flotation cell. These results show that the froth phase is responsible for the upgrading of attached particles across the froth phase as well as for the separation of bubble-particle aggregates from suspended slurry. The pulp phase is responsible for creating bubble-particle aggregates through the attachment of hdyrophobic mineral particles to air bubbles. Many complex factors affect the extent to which this occurs including the size and hdyrophobicity of the particles, the size and number of air bubbles produced by the flotation machine, the rate of collisions between particles and bubbles and the overall chemistry of the system. This measurement of bubble loading presents an opportunity to measure the impact of all these factors on the successful creation of bubble-particle aggregates. Based on a literature review suggesting that there was a high probability of particles being detached at the pulp-froth interface due to the aggregates change in momentum, a three phase description of a flotation cell was proposed. The three phases were: pulp, pulp-froth interface and upper froth zones. A second froth recovery measurement technique (changing froth depth) was used in combination with the bubble load technique to determine the recovery across each of the two froth zones. It was found that the pulp-froth interface appears to be responsible for the selectivity observed across the froth phase as a whole. These findings will enable more in-depth research into the sub-process of the froth phase as well as assisting flotation cell design through a better understanding of the roles of the pulp-froth interface and the upper froth region.
|
7 |
Development of a model for predicting thickener rake torqueBojcic, P. Unknown Date (has links)
No description available.
|
8 |
Modelling of flowing film concentratorsMajunder, Arun Kumar Unknown Date (has links)
No description available.
|
9 |
Mathematical modelling the two compartment mill and classificationHashim, Syed Fuad Bin Saiyid Unknown Date (has links)
No description available.
|
10 |
Interaction between mine and plant in coal processingKrco, Z. Unknown Date (has links)
No description available.
|
Page generated in 0.056 seconds