Multi-pulse converters have been widely used for a multi-megawatt scale power generating system to comply with harmonic regulations. Among all types of multi-pulse converters, a 12-pulse converter is the most widely used due to the simple structure, which consists of a delta-delta and a delta-wye phase-shift transformer pair and it effectively mitigates undesirable harmonics from the nonlinear load. In the early 2000s, a shunt type passive front-end for a shipboard power system was proposed. By shunting the two gensets with 30° phase angle difference, a single phase-shift transformer effectively eliminates 5th and 7th harmonics. It achieves a significant size and weight reduction compared to a 12-pulse converter while keep the comparable harmonic cancellation performance. Recently, a hybrid type front-end was proposed. On top of the passive front-end, 3 phase active power filter was added and an additional harmonic cancellation was achieved to further eliminate 11th and 13th harmonics. However, the performance of both the passive and hybrid type front-end are highly dependent on the size of the line reactor in ac mains. A back to back active power filter is proposed in this dissertation to replace the phase-shift transformer in the multi-generator power architecture. The proposed front-end does not include phase-shift transformer and the size and the weight of the overall front-end can be significantly reduced. Due to the active harmonic compensation, the back to back front-end achieves better power quality and the line reactor dependency is improved. The number of required dc-link capacitors is reduced by half by introducing a back to back configuration and the capacitor size is reduced by adjusting the phase angle difference of genset to cancel out the most significant voltage harmonics in the shared dc-link bus. The overview of the existing shunt type front-end is provided and the concept of back to back active power filter is validated by simulation and prototype hardware. The comparison between existing front-end and the proposed front-end is provided to highlight the superior performance of back to back active front-end. The dc-link bus current and voltage ripple analysis is provided to explain the dc-link ripple reduction mechanism. / Doctor of Philosophy / The transportation electrification has gained more and more attention due to its smaller carbon dioxide emission, better fuel efficiency. The recent advances in power devices, microcontrollers, and transducers accelerate the electrification of transportation. This trend is shown in the propulsion system in marine transport as well and the electric propulsion system has been widely used to meet the strict environmental regulations. However, the non-linear circuit components such as capacitor and diode in the electric propulsion system draw non-linear current and significantly deteriorate power quality and lead to critical problems such as reduced life span of circuit components Accordingly, a front-end is required to improve power quality. Also, it is desired to have compact and lightweight front-end for installation flexibility and fuel efficiency improvement. In this dissertation, several front-ends using a phase-shift transformer are reviewed and a detailed analysis is provided to help understand the harmonic cancellation principle of the existing front-end through equivalent circuit analysis, quantitative analysis, and a phasor diagram representation. Based on the analysis of the existing front-ends and shipboard power architecture, lightweight and high-performance front-end is proposed and verified by simulation and prototype hardware. The performance, size comparison between existing front-end and the proposed front-end is provided to show the advantage of the proposed front-end.