This PhD thesis presents an experimental investigation into the tensile properties, strengthening mechanics and failure mechanisms of three-dimensional (3D) woven composites with through-the-thickness (z-binder) reinforcement. 3D composites are being developed for the aerospace industry for structural applications in next-generation aircraft, such as wing panels, joints and stiffened components. The use of 3D woven composites in primary aircraft structures cannot occur until there has been a detailed assessment of their mechanical performance, including under tensile loading conditions. The aim of this PhD project is to provide new insights into the in-plane tensile properties, fatigue life, tensile delamination resistance and failure mechanisms of 3D woven composites with different amounts of z-binder reinforcement. Previous research has revealed that excessive amounts of z-binder reinforcement dramatically improves the tensile delamination toughness, but at the expense of the in-plane structural properties. For this reason, this PhD project aims to evaluate the tensile performance of 3D woven composites with relatively small z-binder contents (less than ~1%). The research aims to provide a better understanding of the manufacture, microstructure and tensile properties of 3D woven composites to assist the process of certification and application of these materials to aircraft structures as well as high performance marine and civil structures.

Three-dimensional woven composites were developed to improve the through-thickness properties which conventional two-dimensional laminate composites currently lack. However, these textile composites generally show lower in-plane mechanical properties due to fibre crimping, and also encounter modelling difficulties due to the complex geometries. In this thesis, the static and fatigue mechanical behaviour of several types of 3D woven composites were experimentally characterised, the influence of the weave architecture on the mechanical performance was revealed, and meso/macro scale numerical models with improved failure criteria were developed to simulate the tensile behaviour of the 3D woven composites. The mechanical characterisation was conducted on six woven structures under tension, compression, and flexural loading, and were also carried out on two weaves under open-hole quasi-static tensile and fatigue loading. Digital image correlation and thermoelastic stress analysis were used to characterise the strain and damage development during static and fatigue loading. The testing results showed that the angle-interlock weave W-3 had higher in-plane quasi-static properties, lower notch sensitivity, higher fatigue damage resistance, but lower delamination resistance. The meso-scale model was developed on the unit cell of the woven structure and the macro-scale model (mosaic model) was created on the testing samples. Both un-notched and notched tensile behaviour were modelled for the angle-interlock weave W-3 and a one-by-one orthogonal weave W-1, and the difference between the predicted and experimental results was within 16% for the unit cell models and within 21% for the mosaic models. A modified failure criterion was developed to better simulate the damage behaviour of the notched macro-scale model and improved the predicted notched strength by 10-20%. Whilst further experimental investigation and improvement in the modelling techniques are still required, the data presented in this thesis provided an essential update for the current 3D woven composites research, and the presented models offered the potential to predict the damage behaviour of large 3D woven structures.

Three-dimensionally woven composites are a relatively new class of material that offer improved out-of-plane performance by including through-the-thickness mechanical reinforcement compared to traditional laminated composite structures. The mechanical properties are highly dependent upon the weave architecture as this dictates the nature of the through the thickness reinforcement and its effect in improving out-of-plane shear strength. A comparison of two testing methods, Short Beam Strength, and Five Point Bending was conducted over a range of span to thickness ratios with the latter found to be more consistent at producing shear failure over a greater range of span to thickness ratios, although evidence of matrix crushing was present in both, and flexural failure in the Short Beam Strength test. Two weave architectures, the orthogonal and angle weave were subjected to the Five Point Bending test and the failure and damage progression behaviour of both weave architectures were characterised using Digital Image Correlation analysis to measure the edge strain through the thickness of the specimens. This testing showed the angle weave architecture had in general a higher failure strength, and more gradual failure due to longer debonding cracks. The orthogonal weave architecture showed a characteristic post-failure response indicative of crack bridging with discrete load recovery and load drop phases. A numerical model developed from previous work builds on the mosaic modelling method and was modified to include cohesive elements in order to simulate interface debonding via the maximum stress criterion. The simulations are consistently 15 20% greater in failure loads, and 8 - 12% greater in failure shear stresses than those found from the averaged experimental results over the range of tested span to thickness ratios. Post failure response was not modelled. The work presented in this thesis is another step towards gaining a thorough understanding of the mechanical properties of 3D woven composite structures, focussing in particular on out of plane shear strength. The modified mosaic modelling method used showed it is effective at modelling the out of plane testing of orthogonal 3D woven composite structures, and offer the potential to predict the failure of larger composite structures of the same construction and 3D woven architecture although developments are still needed in modelling the post failure response.

The present research focuses on analyzing the possibility of implementing three dimensional woven composite (3DWC) materials in hip implants. The integration of 3DWCs in hip implants has the possibility to both extend the life-time and improve patient outcomes; by spatially varying mechanical properties to meet both biological needs as well as required mechanical loading. In this study, the bulk material properties of 3DWCs were varied based on woven composite architecture and determined using physics based models, which reflect the realistic geometries of fibers in compaction and preform. The multi-digital chain method combined with Extended Finite Elemental Analysis (XFEA) are adopted in this micro-analysis for composite design. Four different woven architectures with a combination of different existing biocompatible fiber and resins are considered in this study. The main objective is to assess the mechanical response of these biocompatible materials in the design of 3D woven architectures and determine their ability to match the required modulus at different regions of a hip implant. Results obtained show 3DWCs are viable candidates for this application. Multiple architectures and materials chosen, were able to achieve the desired mechanical response. Additional studies can use these results as a starting point and framework for further mechanical and biological testing.

Les composites tissés 3D, à l'aide de leurs grandes libertés de conception, peuvent fournir des propriétés mécaniques adaptées aux besoins spécifiques d'une structure. La complexité architecturale de ces matériaux induit néanmoins des propriétés, des comportements ainsi que des endommagements très difficiles à prédire. Les travaux présentés dans ce manuscrit s'inscrivent directement dans cette problématique et cherchent à développer des outils permettant, par simulation numérique, de prévoir les caractéristiques mécaniques de ce type de matériaux. Afin de répondre à cet objectif, une approche multiéchelle, alliant essais expérimentaux et simulations numériques, a été adoptée. Cette démarche permet, en appliquant des sollicitations réelles, de considérer la géométrie des renforts et les hétérogénéités du matériau, observables à l'échelle mésoscopique, qui sont responsables du comportement macroscopique du composite tissé. Le travail d'investigation expérimentale s'est attaché à caractériser le comportement d'un composite interlock 2,5D et des ses constituants ainsi que les mécanismes et cinétiques de rupture, pour des sollicitations de traction/flexion, grâce à des observations tomographiques aux rayons X et au concept d'interzone. En ce qui concerne la modélisation numérique, un critère de rupture permettant de simuler la dégradation ultime du composite, en coupant les fils de renforts, a été présenté et testé sur une cellule représentative du composite expérimentale. Les résultats en termes de localisations, d'orientations et de cinétiques de l'endommagement sont en accord avec les observations expérimentales. Ensuite, après avoir estimé l'influence des différents paramètres architecturaux sur le critère de rupture avec une campagne de calcul éléments finis, des architectures optimisées, pour les sollicitations considérées, ont pu être proposées et comparées à l'interlock 2,5D. Toujours dans l'optique d'une meilleure prédiction du comportement des composites tissés, les travaux se sont également intéressés à une modélisation plus fine des mécanismes d'endommagement. Une approche fiabiliste a donc été introduite sur le critère de rupture à l'aide d'une distribution statistique de Weibull. De plus, un autre mécanisme d'endommagement a aussi pu être pris en compte dans la modélisation en simulant, avec le modèle GTN (Gurson-Tvergaard-Needleman), la cavitation de la matrice. Enfin, des techniques de réduction de modèle ont été employées pour diminuer le coût calcul de la modélisation multiéchelle afin d'identifier, par exemple, des propriétés matériaux par méthode inverse ou de simuler des essais de fatigue. / With their large flexibility of design , 3D woven composites can provide mechanical properties tailored specificially to structural needs. However, the architectural complexity of woven reinforcements presents serious challenges when predicting properties, behaviours and damage processes. The present work deals with these challenges and seeks to develop numerical tools which are able to foresee the mechanical characteristics of this kind of materials. For this purpose, a multiscale approach, which combines experimental tests and numerical simulations, has been adopted. This approach allows, simultaneously, to take into account the loads and composite behavior, at the macroscopic scale, also the reinforcement geometry and the material heterogeneities which are only visible at the mesoscopic scale. The experimental investigation has been carried out to characterize the behaviour of an 2.5D interlock composite and its constituents. Examinations of the damage mechanisms have also been performed, using tomography and the interzone concept, for this woven composite under loadings in tension and combined tension and bending. With regards to the numerical modeling part, the ultimate degradation of the composite was simulated by cutting the reinforcement yarns with a failure criterion, previously reported, on a 3D representative cell of the experimental composite. For the two kinds of macroscopic loadings, the locations, orientations and kinetics of the damage were found to be fully in agreement with the experimental results. The influence of the architectural parameters on the failure criterion was then evaluated by finite element calculation. Consequently, it has been possible to proposed optimized architectures and make a camparison, for the two macroscopic loadings, with the 2.5D interlock woven composite. Still motivated to improve the prediction of the behaviour of woven composites, this work has also been on developing a finer modeling approach to the understanding of damage mechanisms. A stochastic approach was therefore introduced to the failure criterion using a Weibull statistical distribution. In addition, matrix cavitation has also been taken into account in the modelling. This damage mechanism was simulated using the GTN (Gurson-Tvergaard-Needleman) model. Finally, model reduction techniques have been applied to lower the cost of computing multiscale modeling in order to identify, for example, material properties by an inverse method or to simulate fatigue tests.

L’introduction des composites dans des pièces structurelles critiques pour les aéronefs représente une réelle rupture technologique et nécessite des études spécifiques afin de maîtriser leur comportement et leur durabilité. Ce travail a pour objectifs de caractériser et de comprendre les mécanismes de vieillissement de composites interlock 3D à fibres de carbone et à matrice polymère lorsqu’ils sont soumis à des cycles thermiques.Dans ce but, un essai de cyclage thermique (-55°C/120°C), dont l’environnement thermique et gazeux est totalement maitrisé, a été mis en place pour le vieillissement d’échantillons composites représentatifs du motif interlock élémentaire. L’analyse des mécanismes de dégradation induits a été réalisée grâce i/ à la mise au point d’une méthode de caractérisation quantitative 3D de l’évolution des microfissures au cours du cyclage, basée sur des observations par microtomographie RX et sur le développement d’une procédure de traitement d’images spécifique, ii/ au développement d’un essai de cyclage thermique in situ synchrotron couplé à une technique de corrélation d’images volumiques 3D, et iii/ à des simulations par éléments finis prenant en compte l’architecture réelle des échantillons à l’échelle mésoscopique et le comportement thermo-viscoélastique de la matrice.Les résultats obtenus mettent en évidence des couplages thermo-chimio-mécaniques complexes,qui s’expriment à travers quatre paramètres influents : le temps (et le nombre de cycles),l’architecture de l’interlock, la ténacité de la matrice et sa sensibilité à la thermo-oxydation. / The introduction of composite materials in critical structural parts for aircrafts represents a real technological breakthrough and requires specific studies to understand their behavior and durability. This work aims to characterize and understand the ageing mechanisms incarbon/epoxy 3D interlock composites when they are submitted to thermal cycling.For this purpose, a thermal cycle test (-55°C/120°C), whose heat and gaseous environment istotally mastered, was set up for the ageing of composite samples of elemental interlock pattern dimensions. Analysis of induced degradation mechanisms was achieved by i/ the development ofa 3D quantitative characterization method of the evolution of microcracks during cycling, basedon observations by microtomography RX and the development of a specific image processing procedure, ii/ the development of an in situ thermal cycle test under synchrotron light, coupled to a digital volume correlation technique, and iii/finite elements simulations taking into account the actual mesoscopic architecture of the samples and the thermo-viscoelastic behavior of thematrix.The results reveal complex thermo-chemo-mechanical couplings that are linked to four important parameters: time (and the number of cycles), the interlock architecture, the matrix toughness andits sensitivity to thermo-oxidation.

3D woven composites, due to the presence of through-thickness fibre bridging, have the potential to improve damage tolerance and at the same time to reduce the manufacturing costs. However, the ability to withstand damage depends on weave architecture as well as the geometry of individual tows. A substantial amount of research has been performed to understand in-plane properties as well as the performance of 3D woven composites exposed to impact loads, but there is limited research on the damage tolerance and notch sensitivity of 3D weaves and no work is reported on the damage tolerance of 3D weaves with a weft binding pattern. In view of the recent interest in 3D woven composites, the influence of weft binder on the tensile, open hole tensile, impact resistance and subsequent residual compressive strength properties and failure mechanisms of 3D woven composites was investigated against equivalent UD cross-ply laminate. Four different 3D woven architectures; layer-to-layer, angle interlocked, twill angle interlock and modified angle interlock structures were produced under identical weaving conditions. All the above mentioned tests were performed in both the warp and weft directions on 3D woven and UD cross-ply laminates. Stress concentration and yarn waviness due to through-thickness reinforcement led to lower mechanical properties compared with the UD cross-ply laminate. However, improved in-plane and damage tolerance properties of 3D woven composites under tensile loads were achieved by modifying the weave architecture. The influence of the weave architecture and binder yarn orientation on the notch insensitivity and damage tolerance of 3D woven composites was less significant for compressive loads. Despite the lower undamaged compression strength of 3D woven structures, their residual compressive strength was found to be superior to their equivalent UD cross-ply laminates. The lower rate of strength reduction in the 3D woven fabrics laminates was attributed to a crack bridging mechanism, effectively inhibiting delamination propagation.