<p>Cross-linked films of ε-caprolactone (CL) and 1,5-dioxepan-2-one (DXO) having various mole fractions of monomers and different cross-link densities were prepared using 2,2’-bis-(-caprolactone-4-yl) propane (BCP) as cross-linking agent and Sn(Oct)2 as catalyst. Reaction parameters were examined to optimize the film-forming conditions. Networks obtained were elastomeric materials, easy to cast and remove from the mould. Effect of CL content and cross-link density on the final properties of the polymer network was evaluated. Thermal, mechanical and surface properties of the films were controlled by monomer feed composition and cross-link density. The films have potential to be used for tissue engineering applications as shown by preliminary cell growth studies. To avoid organometallic catalysts in the synthesis of poly(1,5-dioxepan-2-one) (PDXO), the enzyme-catalyzed ring-opening polymerization (ROP) of DXO was performed with lipase-CA (derived from Candida antarctica) as a biocatalyst. A linear relationship between number-average molecular weight (Mn) and monomer conversion was observed, which suggested that the product molecular weight can be controlled by the stoichiometry of the reactants. The monomer consumption followed a first-order rate law with respect to monomer and no chain termination occurred. Effect of reaction water content, enzyme concentration and polymerization temperature on monomer conversion and polymer properties was studied. An initial activation by heating the enzyme was sufficient to start the polymerization as monomer conversion occurred at room temperature afterwards. Terminal-functionalized polyesters and tri-block polyesters were synthesized by lipase-CA catalyzed ROP of DXO and CL in the presence of an appropriate alcohol as initiator. Alcohol bearing unsaturation introduced a double bond at the chain end of the polyester, which is a useful pathway to synthesize comb polymers. Dihydroxyl compounds were used as macro-initiators to form tri-block polyesters. The enzyme-catalyzed polymerization of lactones has been shown to be a useful method to synthesize metal-free polyesters.</p>

The use of degradable biomedical materials has during the past decades indeed modernized medical science, finding applications in e.g. tissue engineering and drug delivery. The key question is to adapt the material with respect to mechanical properties, surface characteristics and degradation profile to suit the specific application. Degradation products are generally considered non-toxic and they are excreted from the human body. However, large amounts of hydroxy acids may induce a pH decrease and a subsequent inflammatory response at the implantation site. In this study, macromolecular design and a combination of cross-linking and adjusted hydrophilicity are utilized as tools to control and tailor degradation rate and subsequent release of degradation products from biomedical polyester-ethers. A series of different homo- and copolymers of -caprolactone (CL) and 1,5-dioxepan-2-one (DXO) were synthesized and their hydrolytic degradation was monitored in phosphate buffer solution at pH 7.4 and 37 °C for up to 546 days. The various materials comprised linear DXO/CL triblock and multiblock copolymers, PCL linear homopolymer and porous structure, and random cross-linked homo- and copolymers of CL/DXO using 2,2’-bis-(ε-caprolactone-4-yl) propane (BCP) as a cross-linking agent. The results showed that macromolecular engineering and controlled hydrophilicity of cross-linked networks were useful implements for customizing the release rate of acidic degradation products in order to prevent the formation of local acidic environments and thereby reduce the risk of inflammatory responses in the body. / QC 20101109

Cross-linked films of ε-caprolactone (CL) and 1,5-dioxepan-2-one (DXO) having various mole fractions of monomers and different cross-link densities were prepared using 2,2’-bis-(-caprolactone-4-yl) propane (BCP) as cross-linking agent and Sn(Oct)2 as catalyst. Reaction parameters were examined to optimize the film-forming conditions. Networks obtained were elastomeric materials, easy to cast and remove from the mould. Effect of CL content and cross-link density on the final properties of the polymer network was evaluated. Thermal, mechanical and surface properties of the films were controlled by monomer feed composition and cross-link density. The films have potential to be used for tissue engineering applications as shown by preliminary cell growth studies. To avoid organometallic catalysts in the synthesis of poly(1,5-dioxepan-2-one) (PDXO), the enzyme-catalyzed ring-opening polymerization (ROP) of DXO was performed with lipase-CA (derived from Candida antarctica) as a biocatalyst. A linear relationship between number-average molecular weight (Mn) and monomer conversion was observed, which suggested that the product molecular weight can be controlled by the stoichiometry of the reactants. The monomer consumption followed a first-order rate law with respect to monomer and no chain termination occurred. Effect of reaction water content, enzyme concentration and polymerization temperature on monomer conversion and polymer properties was studied. An initial activation by heating the enzyme was sufficient to start the polymerization as monomer conversion occurred at room temperature afterwards. Terminal-functionalized polyesters and tri-block polyesters were synthesized by lipase-CA catalyzed ROP of DXO and CL in the presence of an appropriate alcohol as initiator. Alcohol bearing unsaturation introduced a double bond at the chain end of the polyester, which is a useful pathway to synthesize comb polymers. Dihydroxyl compounds were used as macro-initiators to form tri-block polyesters. The enzyme-catalyzed polymerization of lactones has been shown to be a useful method to synthesize metal-free polyesters. / QC 20101221

Synthetic and degradable polymers are an attractive choicein many areas, since it is possible to control the way in whichthey are manufactured; more specifically, pathways tomanipulate the architecture, the mechanical properties and thedegradation times have been identified. In this work,L-lactide, 1,5-dioxepan-2-one and ε-caprolactone were usedas monomers to synthesize polymers with different architecturesby ring-opening polymerization. By using novel initiators,triblock copolymers, functionalized linear macromonomers andstar-shaped aliphatic polyesters with well-defined structureshave been synthesized. To synthesize triblock copolymers,cyclic germanium initiators were studied. The polymerizationproceeded in a controlled manner although the reaction rateswere low. To introduce functionality into the polymer backbone,functionalized cyclic tin alkoxides were prepared and used asinitiators. During the insertion-coordination polymerization,the initiator fragment consisting mainly of a double bond wasincorporated into the polymer backbone. The double bond wasalso successfully epoxidized and this gave unique possibilitiesof synthesizing graft polymers with precise spacing. Themacromonomer technique is a very effective method for producingwell-defined graft polymers. Spirocyclic tin initiators weresynthesized and used to construct star-shaped polymers. Thestar-shaped polymers were subsequently crosslinked in apolycondensation reaction. These crosslinked structures swelledin water, and swelling tests showed that by changing thestructure of the hydrogel network, the degree of swelling canbe altered. A first evaluation of the surface characteristicsof the linear triblock copolymers was also performed. AFManalysis of the heat-treated surfaces revealed nanometer-scalefibers and tests showed that keratinocytes were able to growand proliferate on these surfaces. / QC 20100602