No description available.

No description available.

No description available.

No description available.

This thesis addresses the issue of measuring worker engagement in health and safety management in the construction industry. The concept of worker engagement has become important due to the lack of effectiveness of regulation in reducing accidents and incidents in this most risky of industrial environments. It is believed that by involving workers at all levels in the project organisation in health and safety matters and their resolution, the rate of injury can be better controlled. The study adapted and contextualised an existing management tool created by the author, based on the proposition that there are e accepted dimensions that describe worker engagement in health and safety in construction and that they can be measured.

No description available.

The overall aim of this work described in this thesis was to apply MALDI-MS and imaging MALDI-MS (MALDI-MSI) to the analysis of compounds of interest in occupational hygiene monitoring. Isocyanates are highly reactive compounds with a wide variety of industrial uses. MALDI-MS and MS/MS were used to investigate diisocyanate stability and reactivity. A monoisocyanate intermediate product was observed from the hydrolysis of both an aromatic and also an aliphatic diisocyanate. The stability of this product was assessed over a 14 day experimental period. Ethanol was used to derivatise hexamethylene diisocyanate (HDI) and the resulting urethane was observed to be stable over 14 days. This derivatisation method was incorporated into a surface swab technique for sampling of HDI from work surfaces. Industrial diisocyanates have been reported to penetrate through skin and to be excreted as diamine metabolites in urine. A LC-MS method for the determination of free toluene diamine (TDA) monomer formed by biotransformation of toluene diisocyanate (TDI) when applied to HaCaT cells was developed. In the two experiments performed, TDA was only observed at low levels after spiking with high concentrations of TDI. This appeared to be due to most of the isocyanate becoming conjugated to proteins within the cell and thus not being extracted during the extraction procedure. A novel ethanol-saturated cellulose membrane blotting technique was developed for the extraction and ethanol-derivatisation of HDI from the surface of skin. However, not all of the HDI present on the membrane reacted with the ethanol. Increasing the amount of ethanol on the membrane did increase the amount of derivatised HDI monomer observed although this occurred at the expense of spatial information. The technique was also applied for analysis of the insecticide chlorpyrifos, for both skin surface sampling and permeation studies. From the images obtained, chlorpyrifos was observed to readily penetrate through the stratum corneum and reach a depth of 1.7mm. The highest amount was located in the dermis after the 1 hour exposure time. The dermal absorption of HDI was monitored after 1 hour exposure by mapping HDI monoamine penetration through the skin via indirect blotting and novel direct skin analysis methods. Similar profiles were observed from both methods. Penetration depths of 2.3 and 2.6 mm were observed for the direct skin and indirect blotting methods respectively. The highest level of HDI monoamine was located in the dermis.

No description available.

No description available.

No description available.