No description available.

This thesis describes the development of a simple and accurate method for estimating the quantity and composition of household waste arisings. The method is based on the fundamental tenet that waste arisings can be predicted from information on the demographic and socio-economic characteristics of households, thus reducing the need for the direct measurement of waste arisings to that necessary for the calibration of a prediction model. The aim of the research is twofold: firstly to investigate the generation of waste arisings at the household level, and secondly to devise a method for supplying information on waste arisings to meet the needs of waste collection and disposal authorities, policy makers at both national and European level and the manufacturers of plant and equipment for waste sorting and treatment. The research was carried out in three phases: theoretical, empirical and analytical. In the theoretical phase specific testable hypotheses were formulated concerning the process of waste generation at the household level. The empirical phase of the research involved an initial questionnaire survey of 1277 households to obtain data on their socio-economic characteristics, and the subsequent sorting of waste arisings from each of the households surveyed. The analytical phase was divided between (a) the testing of the research hypotheses by matching each household's waste against its demographic/socioeconomic characteristics (b) the development of statistical models capable of predicting the waste arisings from an individual household and (c) the development of a practical method for obtaining area-based estimates of waste arisings using readily available data from the national census. The latter method was found to represent a substantial improvement over conventional methods of waste estimation in terms of both accuracy and spatial flexibility. The research therefore represents a substantial contribution both to scientific knowledge of the process of household waste generation, and to the practical management of waste arisings.

No description available.

The current paper recycling processes are surveyed pointing out the major stages and the variety of chemical/mechanical treatments the fibres undergo. The reduction or replacement of chemical/mechanical treatments presents possible advantages in prolonging fibre life. The results from recycled office waste which has been treated with ultrasound show a change in the particle size distribution of toner particles - making these particles easier to remove using established flotation techniques. Particle size distributions were measured using image analysis on thin (20gsm) paper handsheets. To establish the affect of sonication on fibres, a variety of virgin fibres were obtained from UK Paper, Sittingbourne. Results from virgin fibres which have been treated using ultrasound indicate an absence of cutting compared to conventional techniques. Fibres were found to have the same average length (0.6mm) after ultrasound treatment as the control sample, refined fibres were reduced to approximately 0.3 mm in length. Freeness decreased in both virgin sonicated and refined sonicated samples. The decrease in freeness was accompanied by an increase in the strength properties of both categories of fibres. Experiments with a prepared office waste furnish showed that ultrasonic treatment could decrease the size distribution of fused toner particles. The control sample had an average size of 80.9 um, after 1 minute sonication this was decreased to 54.9) um, decreasing further to 46.8)um after 2 minutes sonication. After demonstrating that ultrasound could decrease the particle distribution of the prepared office waste a more realistic and variable furnish was used. The experiments were conducted at room temperature, 50°C and 75°C. These temperatures were chosen to study the behaviour of fused toners as it approaches and exceeds its glass transition point, essentially the melting point of an amorphous polymer. It was found that the toner is easier to remove as the glass transition temperature is approached. Ultrasound is effective in breaking up large toner particles and detaching particles smaller than 25 microns in diameter.

No description available.

The development of techniques for the removal and recovery of metals from industrial effluent taking account of the consequences of the definition of waste in the Basel Convention on transfrontier shipment of waste is reported. The use of fluidised bed cell electrolysis in the recovery of metals from dilute solutions is investigated, and the conditions for recovery optimised. For the first time the application of a novel activated carbon cloth concentrator cell to recover metals from effluent solutions is reported and the conditions for its use optimised. Comparative studies using conventional mesh and plate electrodes, and novel activated carbon cloth electrode for the recovery of cobalt from dilute solution, and copper from three different hydrometallurgical solutions viz (i) Cu/Zn, (ii)Cu/Zn/Fe and (iii) Cu/Zn/Cd containing effluents were carried out. Application of concentrator cell technology including activated carbon cloth and ion exchange resin to the recovery of metals, including precious group metals, from industrial as-supplied samples is reported. Optimisation leads to successful recovery of iridium and palladium from very dilute solutions. The alternative recovery of metal as added-value chemicals is also investigated. The Basel Convention is concerned with transfrontier shipment of waste from developed to developing countries and has produced a need to investigate the leachability of metals in various forms. In this work the leachability of copper and zinc is studied under various conditions that model environmental situations and the results have been used to develop a methodology to determine whether a metal containing material would be subject to a shipment ban under the Convention. As part of the development of the methodology, leaching studies were also carried out on single chemical compounds of copper, zinc, cadmium and lead, and their bioavailability determined.

No description available.

No description available.

No description available.

No description available.