This master's thesis is interested in concept of frequency converter for induction machine to power 2 kW. Control of this converter is wirelessly or via PC. The solution is based on execution with integrated circuits and microprocesors to control them.

Diploma thesis deals with design of crankshaft for two stroke opposed piston diesel engine. In the theoretical research part a history, comparison with competitive engines in nowadays light aircrafts and the advantages of opposed piston engines are mentioned. In the practical part the balancing is chosen and CAD model of crankshaft is designed. Geometry of this model is than checked for fatigue damage fallout. In the final part was chosen the propeller and appropriate reduction gearbox.

The master thesis is focused on the field of heat exchangers. Theoretical part makes the reader familiar with heat exchangers. Practical part is focused on design of chamber, which is part of heat exchanger. Practical part consists of strength calculation by standard ČSN EN 13445. Dimensions of tube sheet are gained in program Visual vessel design. Those parameters are used for creating of 3D model with accurate dimensions which is analyzed in ANSYS Workbench. Output of this analysis is evaluation by stress classification. Practical part is supplemented by drawing of heat exchanger.

The work is focusing on dynamic effects of short-circuit currents, more precisely dynamic effects of short-circuit currents on switchgear cabinet (terminal box). The work was designated to a concrete construction type of two switchgear cabinets located on rotating machines via company Siemens Electric Machines Drásov s.r.o.. The switchgear cabinets are designed for non-explosive environment where the air is used as an insulating medium. The task was to determine how the device will behave during the three-phase short-circuit and three-phase short-circuit with earth/ground connection. The following programs were used for the calculations and simulations: Ansoft Maxwell 16.0, Ansoft Maxwell 2015 and ANSYS Workbench 16.0. By using these programs the effects of forces which acts on current paths in cabinet caused by the passage of short-circuit current were simulated, statically and also dynamically. Further the effects of pressure acting on cabinet frame during the arc short-circuit have been statically and dynamically simulated. All the results are summarized in the conclusion. Conclusion also contains the final evaluation of the functionality of both switchgear cabinets.

This Master thesis is based on problems of force effects of the magnetic field of short-circuit current. Firstly, I analysed the force action of the three phase busbars during the three-pole short circuit. The analysis was performed in the Ansys Maxwell program and I verified the correctness of the analysis by numerical calculation. The second practical part was executed for ABB company. The main task was to analyse the force effects of the short-circuit current in the HV switchgear with focusing on the arms and contact system of the circuit breaker. The simulations of the following configurations were performed in more details: three configurations of the simplified VD4 circuit breaker, two types of VD4 circuit-breaker contact systems and a linear circuit breaker configuration model. The objective was to calculate the forces acting on the current path of the arms and contact system of the VD4 circuit breaker during the three-phase short-circuit and to simulate the effects of forces on these current parts. For modelling of individual assemblies, calculations and simulations I used: SolidWorks 2014, Ansys Maxwell 16.0 and Ansys Workbench 14.5 programs. With SolidWorks 2014 3D CAD software were modelled simplified assemblies of circuit breakers and contact systems. These systems were imported into the Ansys Maxwell software, where the force effects of the magnetic field of the short-circuit current were calculated. In Ansys Workbench programme was simulated the effect of forces on the current circuit breakers. Moreover, the final deformations of the materials (with respect to the mechanical properties of the structure) were plotted. The analysis of force effects of the magnetic field was performed for the specified static short - circuit current value.