The master thesis contains a literature search dealing with the unconventional technology of water jet cutting. The first part is aimed to description of the water jet technology and shows the possibilities of controlling and awarding data for cutting. Follows the chapter about the influences of the input parameters to a surface quality and machining accuracy. The thesis also giving an account of ecological factors of the water jet cutting. The description of the whole technology for production of the sprocket is a part of the thesis. The last part of the thesis is solving the economics of the water jet cutting technology, especially for production of the sprocket with comparing dependency of the cutting conditions.

This study deals with unconventional materials cutting technology with a fo-cus on abrasive water jet cutting and CO2 laser. The thesis is divided into theoretical and experimental section. The theoretical part describes principles and functions of nonconventional technologies, the basic division and practical applications. The practical part is focused on choosing the best technology with the production of samples and their subsequent comparison. The thesis recommends producer and type of the machine which best meets requirements on basis of the test results.

This study deals with technology of abrasive water jet material cutting and influence of cutting head feed rate on surface topography of cut walls with regards to roughness. Eight parameters were chosen based on the CSN EN ISO 4288 standard representing quality of surface after AWJ cutting. When AWJ cutting the chosen material – commercially pure ASTM B265 grade 2 titanium – feed rate was being changed and in order to obtain information about each parameter´s distribution in various depths of the cut, surface composition was evaluated. It was found out that feed rate has significant influence on surface and that the profile elements´ width grows when increasing the feed rate and cut depth. Furthermore, two selected feed rate results were compared to laser beam technology and conclusion for the selected material was made that AWJ cutting is more preferable due to final roughness and no heat affect on the material.