Three direct interfaces for coupling high performance liquid chromatography (HPLC) with atomic absorption spectrometry (AAS) were developed and optimized for the determination of ionic organolead, organoselenium and organoarsenic compounds. The first all-quartz interface consisted of a thermospray nebulizer and a flame microatomizer in which ionic alkyllead analytes (R$ sb{ rm n}$Pb$ sp{ rm (4-n)+};$ R = CH$ sb3,$ C$ sb2$H$ sb5)$ were atomized by a methanol (from HPLC eluent)-oxygen kinetic flame, and channeled in a quartz tube (atom keeper) mounted into the AAS optical beam. Alternately, the classical electrothermal atomization technique for organolead species (quartz furnace under hydrogen atmosphere) was coupled with a post-column derivatization-volatilization apparatus based on the ethylation of ionic alkylleads by sodium tetraethylborate. The limits of detection provided by these two approaches were 1.0-3.4 ng and 0.10-0.15 ng, respectively. Arsonium ((CH$ sb3) sb3$RAs$ sp+;$ R = CH$ sb3,$ CH$ sb2$CH$ sb2$OH, CH$ sb2$COOH) and selenonium ((CH$ sb3) sb2$RSe$ sp+;$ R = CH$ sb3,$ CH$ sb2$CH$ sb2$OH) species were quantified using a novel HPLC-AAS approach based on a direct coupling of three processes: thermospray nebulization, thermochemical hydride generation using hydrogen gas, and diffuse flame atomization. Direct evidences for the thermochemical hydride generation process was obtained by injecting (CH$ sb3) sb3$SeI and SeO$ sb2$ into the interface and capturing the gaseous end products in liquid chemical traps specific for SeH$ sb2$ and Se(IV). Both analytes were derivatized to SeH$ sb2$ only in the presence of hydrogen in the interface. Reverse- and normal-phase high pressure liquid chromatographic methods were also developed and adapted for the HPLC-AAS analyses of alkyllead, arsonium and selenonium compounds in real samples. The limit of detection of the arsonium and selenonium cations were 7.6-13.3 ng and 31.0-43.9 ng, respectively.

The purpose of the research work, presented in this thesis is to offer a detailed atomic level study of interfaces created by adsorption of organic molecules on metals and metal oxides to point out significant impact of substrate, dye structure as well as different mediators on the charge transfer at these interfaces, which is proven to influence the device performance to a great extent. Adsorption of organic photosensitive molecules on metals and metal-oxides is the main focus of this thesis. Phthalocyanines which are organic semiconductors offer a broad range of properties, such as thermal and chemical stability, high charge mobility and strong absorption coefficient in the visible and near-IR regions, which make them very attractive to be applied in various systems and devices. Fuel cells, organic field-effect transistors (OFETs), organic light emitting diodes (OLEDs) and solar cells are examples of phthalocyanine’s applications. The main focus of this work is to characterize the interfaces of Dye Sensitized Solar Cells (DSSCs). DSSC was invented by Michael Grätzel and Brian O’Regan in 1988. At the heart of this cell there is an oxide which is coated by a photosensitive dye. Under illumination, an electron is excited from HOMO to LUMO of the molecule, which can be further transferred to the conduction band of the oxide by a proper energy level alignment. The original state of the dye is regenerated by electron donation via the electrolyte, which usually is an organic solvent containing a redox couple e.g., iodide/triiodide. The iodide is regenerated by reduction of triiodide at the counter electrode. To improve the functionality of the cell, different additives can be added to the electrolyte. To mimic the interfaces of this cell, molecular layers of MPc (M: Fe, Zn, Mg) are adsorbed on both metallic surfaces, Au(111) and Pt(111), and rutile TiO2(110). Layers of iodine were inserted between metallic substrates and dyes to investigate the electronic properties and charge transfer at these multi-interface systems. 4-tert-butyl pyridine is a significant additive to the electrolyte and has proven to enhance the cell’s performance. This molecule was also adsorbed on Pt(111) and TiO2(110). Phthalocyanines were deposited by organic molecular beam deposition and 4TBP was evaporated at room temperature. Surface structures and reconstructions were confirmed by LEED measurements. Surface sensitive synchrotron radiation based spectroscopy methods, XPS and NEXAFS were applied to characterize these surfaces and interfaces. STM images directly give a topographical and electronic map over the surface. All measurements were carried out in UHV condition. When MPc was adsorbed on Au(111) and TiO2(110), charge transfer from molecule to substrate is suggested, while the opposite holds for MPc adsorbed on Pt(111). Moreover, stronger interaction between MPc and Pt(111) and TiO2(110) compared to Au(111) also demonstrates the effect of substrate on the charge transfer at the interface. The stronger interaction observed for these two substrates disturbed the smooth growth of a monolayer; it also resulted in bending of the molecular plane. Interaction of MPc with metallic surfaces was modified by inserting iodine at the interface. Another substrate-related effect was observed when MgPc was adsorbed on TiO2(110);  and -cross linked surfaces, where the surface reconstruction directly affect the molecular configuration as well as electronic structure at the interface. Besides, it is shown that the d-orbital filling of the central metal atom in MPc plays an important role for the properties of the molecular layer as well as charge transfer at the interface. Upon adsorption of 4TBP on Pt(111), C-H bond is dissociatively broken and molecules is adsorbed with N atoms down. Modification of surface by iodine, prevent this dissociation. In the low coverage of iodine, there is a competition between 4TBP and iodine to directly bind to Pt(111). Investigation on the adsorption of 4TBP on TiO2(110) illustrated that these molecules in low coverage regime, prefer the oxygen vacancy sites and their adsorption on these sites, results in a downward band bending at the substrate’s surface. / <p>QC 20131203</p>

The scope of these studies was two-fold: to evaluate high pressure homogenized slurries as a rapid means of screening wood pulps for their Cu, Mn and Fe content and to evaluate the high pressure homogenization in combination with chelating agents or enzymatic digestion for the liberation/extraction of metal ions from this matrix. / Cu, Mn and Fe were determined successfully in pulp samples using high-pressure homogenization prior to slurry introduction-GF-AAS. The analysis time of the method from sample acquisition to determination was of the order of a few minutes per sample. / Different cellulose swelling/dissolution agents were evaluated for the generation of quasi-stable pulp suspensions, rich in cellulose. High-pressure homogenization alone or in combination with chelating agents or enzymatic digestion was also investigated as a means of quantitatively releasing these metal ions into the liquid phases. / A new model of homogenizer equipped with ceramic homogenizing valve with a few modifications was evaluated in terms of metal contamination levels within the final sample dispersion. (Abstract shortened by UMI.)

No description available.

No description available.

Several biologically important arsenic compounds including methylarsonate, trimethylarsine oxide, tetramethylarsonium ion, arsenobetaine and arsenocholine were prepared, in good yields, from sodium arsenite, or dimethylarsinic acid. These organoarsenic compounds together with arsenite, arsenate and dimethylarsinic acid were used as standards for the development of analytical methods for determining the levels of individual arsenic compounds (arsenic speciation) present in natural matrices. / Arsenobetaine, arsenocholine and tetramethylarsonium ion were separated by high performance liquid chromatography (HPLC) with on-line detection by thermochemical hydride generation (THG)-AAS. The analytes were eluted from the cyanopropyl bonded phase HPLC column with a 1% acetic acid methanolic mobile phase which also contained diethyl ether triethylamine, and trimethylsulfonium iodide or picrylsulfonic acid. A surface response methodology and a univariate optimization procedure were used to determine the optimum concentration of solvent modifiers in the methanolic mobile phase. Limits of detection in the range 4-5 ng (as As) were obtained for the arsonium analytes under optimum chromatographic conditions. / A simple phenol extraction procedure was developed to isolate arsonium analytes from edible marine tissues (lobster tail muscle, peeled and deveined shrimp, and cod fillet), cod liver oil and human urine. The crude extracts were separated on the cyanopropyl column using a methanolic mobile phase and detected on-line by THG-AAS. Recoveries from tissues or from urine which had been spiked at 0.1-3.4 $ mu$g of As cation/g of fresh weight were 80% or greater for each of five sample types. / An improved HPLC-AAS interface which was compatible with either aqueous or organic mobile phases was also developed. The interface provided approximately equivalent responses to different arsenic oxidation states which resulted in low to subnanogram chromatographic limits of detection for arsenic oxyanions and arsonium cations in an aqueous or methanolic mobile phase. Nascent As anions and As cations were conveniently coextracted from aqueous solution or from fish muscle by phenol extraction and quantified in the same chromatographic run. This method has been applied to a standard reference sample of dogfish muscle (DORM-1), a marine reference sediment sample (PACS-1) and to sediment porewaters (SAG-15) from the Saguenay Fjord.

The photosensitive molecule adsorption on titanium dioxide (TiO2) forms the so-called “dye sensitized TiO2” system, a typical organic/oxide heterojunction, which is of great interest in catalysis and energy applications, e.g. dye-sensitized solar cell (DSSC). Traditionally, the transition metal complex dyes are the focus of the study. However, as the fast development of the organic semiconductors and invention of new pure organic dyes, it is necessary to expand the research horizon to cover these molecules and concrete the fundamental understanding of their basic properties, especially during sensitization.In this work, we focus on two different photosensitive molecules: phthalocyanines and triphenylamine-based dyes. Phthalocyanines are organic semiconductors with symmetric macro aromatic molecular structures. They possess good photoelectrical properties and good thermal and chemical stability, which make them widely used in the organic electronic industries. Triphenylamine-based dyes are new types of pure organic dyes which deliver high efficiency and reduce the cost of DSSC. They can be nominated as one of the strong candidates to substitute the ruthenium complex dyes in DSSC. The researches were carried out using classic surface science techniques on single crystal substrates and under ultrahigh vacuum condition. The photosensitive molecules were deposited by organic molecular beam deposition. The substrate reconstruction and ordering were checked by low energy electron diffraction. The molecular electronic, geometric structures and charge transfer properties were characterized by photoelectron spectroscopy, near edge X-ray absorption fine structure spectroscopy and resonant photoelectron spectroscopy (RPES). Scanning tunneling microscopy is used to directly image the molecular adsorption.For phthalocyanines, we select MgPc, ZnPc, FePc and TiOPc, which showed a general charge transfer from molecule to the substrate when adsorbed on rutile TiO2(110) surface with 1×1 and 1×2 reconstructions. This charge transfer can be prevented by modifying the TiO2 surface with pyridine derivatives (4-tert-butyl pyridine (4TBP), 2,2’-bipyridine and 4,4’-bipyridine), and furthermore the energy level alignment at the interface is modified by the surface dipole established by the pyridine molecules. Annealing also plays an important role to control the molecular structure and change the electronic structure together with the charge transfer properties, shown by TiOPc film. Special discussions were done for 4TBP for its ability to shift the substrate band bending by healing the oxygen vacancies, which makes it an important additive in the DSSC electrolyte. For the triphenylamine-based dye (TPAC), the systematic deposition enables the characterization of the coverage dependent changes of molecular electronic and geometric structures. The light polarization dependent charge transfer was revealed by RPES. Furthermore, the iodine doped TPAC on TiO2 were investigated to mimic the electrolyte/dye/TiO2 interface in the real DSSC.The whole work of this thesis aims to provide fundamental understanding of the interaction between photosensitive molecules on TiO2 surfaces at molecular level in the monolayer region, e.g. the formation of interfacial states and the coverage dependent atomic and electronic structures, etc. We explored the potential of the application of new dyes and modified of the existing system by identifying their advantage and disadvantage. The results may benefit the fields of dye syntheses, catalysis researches and designs of organic photovoltaic devices. / QC 20111114

Cleaning validation of pharmaceutical manufacturing equipment is required by legislation. Generally, wet chemical techniques are employed using swabbing and/or rinse sampling methods. These are generally either selective and time consuming, or less selective and give results in a shorter period. The infrared reflection absorption spectroscopy (IRRAS) technique explored here attempts to deliver accurate, selective surface contamination information in real time to complement current methods and reduce down-time. The IRRAS instrument used in this research is a Fourier transform infrared (FTIR) spectrometer coupled by an IR fibre-optic cable to a grazing-angle sampling head with a fixed incidence angle of 80°. The introduced flexibility permits collection of in situ spectra from contaminated surfaces. Calibration models are developed using the multivariate, linear partial least squares (PLS) statistical method. The research focuses on sodium dodecyl sulfate (SDS), a model cleaning agent, on metal (aluminium and stainless steel) and dielectric (glass, EPDM and silicone) surfaces. The effects of surface finish are investigated for SDS on stainless steel. Calibrations for SDS and paracetamol in the presence of each other on glass surfaces are examined, as well as a common industrial cleaner (P3 cosa® PUR80) on polished stainless steel. For the calibration sets in this thesis, RMSECV values were < 0.41 µg cm⁻², corresponding to conservative surface residues detection limits of better than ~0.86 µg cm⁻². However, RMSECV values depend on the calibration loading range, and the detection limits were typically ~0.2 µg cm⁻² for loading ranges 0-2.5 µg cm⁻². These are below visual detection limits, generally taken to be 1-4 µg cm⁻², depending on the analyte and substrate. This shows that IRRAS is a viable method for the real-time detection and quantification of surface contamination by surfactants and active pharmaceutical ingredients on metals and dielectrics.

Thesis (Ph. D.)--McMaster University (Canada), 1989. / Source: Dissertation Abstracts International, Volume: 62-13, Section: A, page: 0000.

Thesis (M.Sc. (Hons.)) -- University of Western Sydney, Nepean, 1998. / Includes bibliographical references (leaves 129-136).