Spelling suggestions: "subject:"absorption spectroscopy"" "subject:"asbsorption spectroscopy""
1 |
Hydride generation : atomic absorption spectrophotometry.January 1985 (has links)
Tsui Shu Ki. / Bibliography: leaves 110-112 / Thesis (M.Ph.)--Chinese University of Hong Kong, 1985
|
2 |
The design and some absorption characteristics of a tantalum boat atomizing system for atomic absorption spectroscopyEverson, Richard Todd January 2010 (has links)
Digitized by Kansas Correctional Industries
|
3 |
Theoretical and experimental factors affecting the accuracy and precision of atomic absorption measurementsBower, Nathan Wayne 26 July 1977 (has links)
A procedure for evaluating the precision of atomic absorption
measurements is presented and applied to 21 elements under varying
instrumental conditions. The experimental relative standard deviations
(RSD's) in absorbance obtained from repetitive measurements made
with a high resolution voltmeter and on-line computer, are compared
to those predicted by a recently proposed theoretical equation. Good
agreement between theory and experiment is obtained which indicates
the usefulness of the theoretical equation and evaluation procedure.
The study reveals that, under the conditions used for atomic absorption
measurements for the 21 elements, the noise associated with the
lamp (i.e., signal shot noise and source flicker noise) and with the
flame (i.e., flame transmission flicker noise) limit the precision at
small absorbances (i.e., A < 0.1 ). Flame transmission flicker noise
generally increases with the flame absorbance.
Over most of the analytically useful range of absorbances (i.e.,
0.1 > A > 1.0-1.5) analyte absorption flicker limits the precision to
a value near 1% RSD for one second integration periods. The precision
can be improved by a factor of two to three for any absorbance region
with ten second integration periods, although not much better than this
with any longer integration periods. Precision at high absorbances
(i.e., A > 1.0-1.5) is limited by emission noises (analyte and background).
For longer wavelengths, the analyte emission noises become
more significant.
The limiting noises' frequency dependence is obtained with noise
power spectra and analyte absorption, emission, and fluorescence
flicker are shown to all have a similar 1/f (inverse frequency)
character, as well as a value of about 1% for the RSD for Cu. Abbreviated procedures for evaluation of noise in atomic emission (AE) and atomic fluorescence measurements are presented. Other studies into
the source of analyte absorption noise are presented, and the conclusion is drawn that this flicker noise is probably due to nebulization fluctuations, non-fundamental in nature.
The study of these various noise sources' dependence on the
instrumental parameters (e.g. burner position, slit height and width,
flame type and stoichiometry, and lamp current) suggest how to optimize
conditions or concentrations so that an analysis can be carried out
with maximum precision. / Graduation date: 1978
|
4 |
Measurement of Water Vapor Concentration using Tunable Diode Laser Absorption SpectroscopyBarrett, Alexander B. 2009 December 1900 (has links)
Tunable diode laser spectroscopy and the Beer-Lambert relation has been used to measure the absorption of water vapor both in an absorption cell and in a shock tube. The purpose of this thesis is to develop a laser diagnostic capable of determining species concentration. The correlation between species concentration and absorption is known, and if one is known the other can be calculated. A diode laser was obtained which has a tunable range of 1325.7 - 1400.8 nm and is centered at 1384 nm. An experimental setup was created in which the laser was used to obtain absorption spectroscopy data for water vapor within two separate scenarios- in an absorption cell and in a shock tube. A model was constructed which enabled the calculation of the Voigt profile which in turn was used to determine the absorption coefficient and ultimately enable the utilization of absorption spectroscopy principles to determine species concentration and/or absorption percentage.
The experiments for the absorption cell were performed at room temperature. Twenty runs were performed and the average error for all runs was less than one percent. Three runs were performed for the shock-tube experiments. The absorption was calculated at three times- prior to the arrival of the shock, after the incident shock passed, and after the reflected shock passed. The temperatures for these conditions were 296K, 1060K, and 2000K respectively. These experiments showed reasonable agreement with theoretical calculations.
|
5 |
Extension of the linear dynamic range for high resolution continuum source atomic absorption spectrometry and its application in the analysis of biological samples. / The linear dynamic range for high resolution continuum source atomic absorption spectrometryHlongwane, Mokgadi Miranda. January 2013 (has links)
M. Tech. Chemistry / Recently, traditional electro-thermal atomic absorption spectrometry has lost its popularity to other multi-element spectrometric techniques. Limited linear determination range, which is usually two orders of magnitude, is one of the reasons for the loss. As a result, tens of calibration standards and diluted samples have become an indispensable part of the electro-thermal atomic absorption spectrometric analysis, particularly if numerous samples containing a broad concentration range of analytes are to be analysed. The objective of this work was to establish the mechanism of absorption signals for high concentrations of analyte atoms in the absorption volume. Secondly, to employ the findings for HR-CS ET-AAS data quantification, within a broad range of analyte concentrations. It was expected that the sought algorithm would permit the use of the most sensitive analytical lines or those less prone to interferences, independent of the concentration of the respective analyte in the sample.
|
6 |
Ringdown spectroscopy in optical waveguidesTrefiak, Nicholas Ronald 05 July 2007 (has links)
Ringdown spectroscopy (RDS) is an absorption spectroscopic and detection
technique that makes use of an optical cavity to realize a long effective pathlength
through a sample and to render the measurement independent of intensity. These two
features give RDS an advantage over traditional absorption techniques and allows its
application in measuring concentrations of strongly absorbing analytes present in trace
amounts, or in measuring weak absorptions for analytes in higher concentrations. The
resonant optical cavities used here are created from optical fibre. This permits the easy
construction of an inexpensive apparatus for RDS. The performance of various cavity
geometries (linear, circular) in three ranges of the visible and near infrared spectrum (405,
800, and 1550 nm) was examined. Concurrent multiexponential decays arising from core
modes, cladding modes, and amplified spontaneous emission were analyzed in the
framework of an exponential decay model transformed into the frequency domain.
The small mode field diameter of light within a fibre is well suited to probing very
small liquid volumes on the order of pico- or femtolitres. This uniquely positions optical
waveguide-based RDS for application in absorption detection for separation techniques
such as capillary electrophoresis (CE) and high performance liquid chromatography
(HPLC) where high time resolution detection is required across narrow separation
channels. The experimental and theoretical work presented here was preformed with an
eye towards this purpose. / Thesis (Master, Chemistry) -- Queen's University, 2007-07-04 16:23:53.173
|
7 |
Some theoretical and experimental studies in atomic absorption spectrometry.Hutton, Jonathan Craig, Carleton University. Dissertation. Chemistry. January 1992 (has links)
Thesis (Ph. D.)--Carleton University, 1993. / Also available in electronic format on the Internet.
|
8 |
Optimisering van die grafietbuis-parameters in elektrotermiese atoomabsorpsiespektrometrieRademeyer, Cornelius Johannes 15 July 2014 (has links)
D.Phil. (Chemistry) / In order to optimise the parameters for graphite tubes used for electrothermal atomic absorption spectrometry a good understanding of the factors that influence the efficiency of the atomisation process is necessary. The most important of these factors are the temperature surroundings of the analyte. Consequently, a model was developed to calculate the spatial and temporal variations of the wall temperature of the tube. Reliability of the calculations was ensured by determining some graphite parameters experimentally. Normal laboratory conditions could therefore be simulated precisely. There were some problems associated with the actual measurement of wall temperatures. After these had been investigated and solved, it was possible to correlate and verify the calculated temperat~re values with the experimentally measured ones. While it is likely that the analyte evaporates as such (or in modified forms) from the walls of the tube, the actual atomisation process most probably takes place in the gas phase. It is therefore the gas temperature that controls atomisation. In view of this a gas temperature model was developed by means of which spatial and temporal temperature data within the atomiser could be calculated. Together with the calculations of wall temperatures already mentioned, this presents for the first time the possibility of calculating temperatures, both spatially and temporally, at any point within the atomiser during the heating cycle. With the above information, the nature of atomisation processes can be studied. In this work, attempts were made to study the mechanism by which- the use of a platform placed within the atomiser eliminates interferences. Contrary to the literature, it was found that this can not be attributed to stabilized temperature surroundings.
|
9 |
Standaardisasie van spoorelemente in internasionale biologiese verwysingsmateriale met behulp van neutronaktiveringsanalise en atoomabsorpsiespektrofotometriePieterse, Hendrik Jonathan 21 October 2015 (has links)
M.Sc. (Instrumental Chemical Analysis) / An investigation was undertaken into the analytical procedures and the identification of problem areas, for the certification of a new biological standard reference material supplied by the International Atomic Energy Agency, namely, a human hair sample designated as HH-I ...
|
10 |
A study of factors affecting precision in atomic absorption spectrometryRoos, Johannes Tielman Hofmeyr January 1976 (has links)
1. The effect of deviations from Beer's law on the precision of atomic absorption analysis has been examined from a theoretical point of view, and a function has been derived which makes it possible to evaluate quantitatively the effect of calibration curvature on the precision of analysis. The influence of incomplete sample volatilization on calibration curvature has been briefly investigated. 2. Possible error sources in atomic absorption spectrometry have been classified according to the "error function" (i.e., the dependence, upon transmittance T, of the uncertainty dT in a given transmittance measurement) with which they are associated. The magnitude of the contribution from each component function to the overall error function has been evaluated quantitatively, and it has been shown that the major component in nearly every case examined is that associated with the dynamic nature of the flame. Concentration ranges for optimum precision are suggested. 3. The effect of varying instrumental parameters on precision has been investigated, and generalized conditions for best precision have been ascertained. 4. The effect of an initial solvent extraction step on the precision of atomic absorption has been investigated for the elements copper and lead. It is shown that solvent extraction may be used to improve both the analytical sensitivity and the precision of analysis when very low concentrations of metal are determined. 5. The precision of analytical methods involving atomic absorption spectrometry has been studied, and the standard deviations compared with those obtained for the analysis of similar samples by means of a variety of other methods of analysis, both instrumental and classical.
|
Page generated in 0.1219 seconds