Spelling suggestions: "subject:"absorptive material"" "subject:"absorptiven material""
1 |
Feasibility Study of Phononic Crystal Structure Applied as Underwater Absorptive Material.Lin, Yi-Hsien 16 August 2005 (has links)
¡§Phononic crystal,¡¨ a binary-composite medium composed of a square array of parallel circular brass cylinders in a water matrix is reported. Phononic crystal exists total band-gaps phenomenon which is caused by destructive interference of Bragg reflection in their acoustic transmission spectrum. This Bragg reflection theorem is also a basis for searching the total band-gaps in this thesis.
Because of the band-gaps of the phononic crystal, it is very appropriate for applying phononic crystal in underwater absorptive materials. This research presents the Bragg theorem prediction of brass/water acoustic forbidden bands structure with three kinds of different filling fractions, 5 %, 10 %, and 20 %, and three kinds of transducers. Their central frequency are 300 kHz, 500 kHz, and 1 MHz, respectively, and their bandwidths are 210 kHz~390 kHz, 350 kHz~650 kHz, and 700 kHz~1300 kHz, respectively. Furthermore, in order to find total band-gaps, [100] and [110] directions are measured in this research. The band-gaps of phononic crystal in this research are designed by the couple probes of lowest frequencies 300 kHz in our laboratory. Although the devices of underwater acoustics usually operate in 15~200 kHz, it is also proved indirectly that to design and to apply phononic crystal in underwater absorptive materials are workable.
In addition, the measurement results of band-gaps of single frequency are the same as broad-band frequencies using ultrasonic analyzer in this thesis. Therefore, it is a good way to survey the band-gaps with broad-band frequencies method first, and then to use single frequency method measuring deeply drop of the band-gaps.
This research uses Bragg reflection theorem, to calculate approximate position of band-gaps, and predicts n=1~3 total band-gaps successfully in experiments. It is also proved that using this kind of underwater absorptive materials of phononic crystal has the effect of camouflaging submarine purpose with specific frequencies. This is an easiest theorem to survey band-gaps of phononic crystal, and must be a most useful tool to design all kinds of absorptive materials of phononic crystal.
|
2 |
Implementation of Refractory Foam Technology for Silencing Small IC EnginesSesler, Josh J. 11 November 2005 (has links)
With the need for stealth in defense applications steadily increasing, noise reduction continues to play an important role in the world of aeronautics. With the ever increasing number of small UAV flight vehicle designs and their stringent weight requirements, acoustic solutions become progressively more complex. This thesis investigates the use of refractory foam, a new class of porous material, for designing effective silencers for small IC engines. The solution must be lightweight, compact, conformable, and capable of handling the rigors of flight. Throughout the course of this research, many silencer designs were fabricated to take advantage of refractory foam technology. These silencer designs were then tested against existing designs using both anechoic and outdoor testing techniques. These results proved refractory foam to be a superior broadband noise absorber that can survive harsh flight environment. Silencer designs using this material showed overall improvements in the areas of noise reduction, weight, size, and backpressure, compared to commercial designs. The final silencer design boasted an Aweighted overall sound pressure level that was 12.1 dBA lower than the reference case. This result was accomplished using nearly half the volume required by other designs to attain similar results. / Master of Science
|
Page generated in 0.0839 seconds