Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2002. / Includes bibliographical references (leaves 92-96). Also available in electronic version. Access restricted to campus users.

Thesis--Auburn University, 2009. / Abstract. Vita. Includes bibliographic references (p.160-163).

Thesis (M.S.)--Rochester Institute of Technology, 1993. / Typescript. Includes bibliographical references (leaves 81-83).

Thesis (M.S. in Applied Science) Naval Postgraduate School, March 1997. / Thesis advisors, Chiu, Ching-Sang ; Smith, Kevin B. ADA331078. Includes bibliographical references (p. 33).

Thesis (M.S.)--University of Wisconsin--Madison, 1982. / Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 228-232).

In this thesis we investigate various aspects of SAW devices and strain sensitive spin species in ZnO and LiNbO₃ for coupling surface acoustic waves to spin ensembles. Firstly, we performed a series of ESR experiments exploring the potential of Fe³⁺ impurities in ZnO for spin-lattice coupling. This spin system has already been identified as a high potential quantum technology component due to its long coherence time. We show that the system also has good properties for spin-lattice coupling experiments, with a strain-coupling parameter G₃₃ = 280 ± 5GHz/strain, which is about 16 times larger than the largest reported for NV centres in diamond. We found that the LEFE effect as well as the spin Hamiltonian parameter D have a linear temperature dependence. As the relative change in each coincide, this strongly supports the notion that the modification of D by an electric field is a multiplicative effect rather than an additive one, D = D₀(1 + κΕ). The LEFE coefficient we measured is several times larger for Fe³⁺:ZnO than for Mn²⁺:ZnO. Secondly, we have fabricated and characterised SAW devices on bulk ZnO crystals and Fe doped lithium niobate. We found that the nominally pure ZnO was conductive at room temperature due to n-type intrinsic doping, and electrical losses inhibited any transmission through a SAW delay line above T = 200K. The one-port resonator measured down to milli-Kelvin temperatures showed excellent quality factors of up to Q ≃ 1.5 x 10⁵ in its superconducting state. Finally, we performed a surface acoustic wave spin resonance (SAWSR) experiment using a one-port SAW resonator fabricated on Fe²⁺:LN. We observed a clear signal at T ≃ 25 K, at a field near the expected one for a Δm_s = 2 transition between the |−1⟩ and |+1⟩ states. We concluded it to be a transition induced by acoustic coupling since the signal intensity did not tend to zero when the magnetic field was parallel to the crystal anisotropy axis. Furthermore, this tells us that the coupling is due to a modulation of the E zero-field splitting parameter rather than D. We investigated the dependence on microwave power and found the saturation limit. We performed a measurement of Fe³⁺:LN as well to reassure ourselves that the resonance is not magnetically excited by the field around the IDT.

Made available in DSpace on 2014-06-11T19:35:41Z (GMT). No. of bitstreams: 0 Previous issue date: 2005-11Bitstream added on 2014-06-13T20:27:54Z : No. of bitstreams: 1 botura_ca_dr_guara.pdf: 4170323 bytes, checksum: 21316bd955d294e528bc1edcbfa2bd8b (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Universidade Estadual Paulista (UNESP) / Este trabalho tem a finalidade de investigar a incineração de resíduos sólidos na presença de ondas acústicas para incrementar o processo de combustão. Para tanto foi projetado e construído um forno rotativo para incineração de resíduo sólido industrial. Um combustor do tipo sintonizável foi desenvolvido e acoplado ao forno rotativo para indução de oscilações acústicas, além de outros acessórios utilizados no processo de combustão (alimentador de resíduos, ejetor, sonda para análise de gases). Os resultados obtidos mostram que a presença do campo acústico melhora o processo de combustão. Estes resultados foram avaliados principalmente através da análise de gases de combustão, permitindo uma redução da quantidade de combustível utilizado. / This work has the objective of investigating the incineration of solid wastes with acoustics oscillations to improve the combustion process. A rotary kiln was designed and built for the research. A tunable combustor was developed and connected to the rotary kiln for induction of the acoustics oscillations. Accessories were also built and used in the combustion process (feeder of waste, air ejector, probe for gas analysis). The results show that the presence of the acoustic field improves the combustion process. These results had been evaluated mainly through the analysis of gas combustion, allowing a reduction of the amount of used fuel.

The work presented in this thesis consists of two parts: development and application of a novel passive acoustical approach for field measurement of breaking surface waves, and interpretation of the resulting observations in terms of wave field information so as to improve the understanding of wave breaking. The development of the acoustical approach has been motivated by the difficulties inherent in measurement of breaking waves. This approach makes use of an array of four broadband hydrophones which is able to track individual breaking waves by passive detection of the naturally generated sound of wave breaking. The Generalized Cross Correlation method is used to determine time differences of acoustic signals from breaking waves arriving at the array, allowing the breaking waves to be located with the given array geometry. Observations of breaking waves were made by means of this technique during the Surface Wave Processes Program (SWAPP). The spatial and temporal statistics of breaking waves, including breaking wave density, travel velocity, lifetime of breaking and spacing, are obtained from the observations. Statistical models are developed to assess, and where appropriate, correct for any bias resulting from limitations of the measurement approach. The breaking wave statistics provide important information about the physical process of wave breaking and its distribution in different wave fields. It is found that wave breaking in the open ocean occurs at a scale substantially smaller than the scale associated with the dominant wind wave component in the wave spectrum. Numerical simulation of breaking wave statistics and comparison with the observations demonstrates that the scale of breaking can be predicted from the directional wave spectrum by a linear model with a single breaking threshold. These results will provide input to comprehensive models of wave dissipation. Acoustical radiation properties of individual breaking waves are a further aspect of wave breaking that has been observed with the aforementioned technique. Investigation of the sound radiated from breaking waves reveals information both on the nature of the sound generation mechanism by breaking and the dimension of breaking waves. Statistical analysis of the acoustic source intensity associated with wave breaking suggests that the source intensity can be related to the breaking scale and wave energy dissipation, thus implying that surface wave dissipation could be remotely measured by using ambient sound. / Graduate

Made available in DSpace on 2014-06-11T19:22:31Z (GMT). No. of bitstreams: 0 Previous issue date: 2011-12-07Bitstream added on 2014-06-13T19:28:02Z : No. of bitstreams: 1 tiago_mm_me_ilha.pdf: 962669 bytes, checksum: 4988399c15f758626b264c1adb577b2f (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Um dos setores de grande importância na indústria frigorífica é o responsável pelo esquarte- jamento de aves, no qual peças inteiras são separadas em partes menores para comercialização. O processo de esquartejamento pode ser feito de forma automática, através de máquinas de corte, ou por trabalhadores, que cortam as aves utilizando uma serra circular. Por ser um tra- balho manual e envolver uma lâmina de corte, a periculosidade desse tipo de trabalho é alta, de maneira que mesmo com o uso de uma luva de aço inox como equipamento de proteção, costumam ocorrer acidentes que podem variar desde pequenos cortes até amputação de parte da mão do trabalhador atingido. Neste trabalho, é apresentado um método de análise de sinais para evitar que esse tipo de acidente ocorra. Esse sistema baseia-se na análise dos sinais acústicos envolvidos gerados durante esse processo e são utilizados para desligar o motor que impulsiona a serra e acionar um sistema de frenagem em casos quando houver a ocorrência de acidentes. O problema é abordado utilizando inicialmente um filtro digital e, posteriormente, com as técni- cas de análise multirresolução apresentadas pelas wavelets. Além disso, empregou-se também a decomposição de modo empírico, que também realiza uma análise multirresolução dos sinais decompondo os mesmos em funções de modo intrínseco. Visando detectar o maior número possível de toques suaves de luva na serra sem que cortes de ossos de frango fossem confundi- dos com toques de luva, o sistema apresentou um índice de acertos de aproximadamente 70%, havendo a ocorrência de apenas 2% de falsos positivos. Além desse problema, abordou-se o caso de detecção de trinca em ovos, no qual o objetivo era separar ovos trincados de ovos in- teiros utilizando um sistema barato e eficiente... / One of the most important sectors in the meatpacking industry is chicken quartering, where whole pieces are cut into smaller ones. The quartering process can be done by automatic ma- chines or by manually cutting the chickens using a circular saw. The manual technique imposes physical risks for the workers, which wear protective stainless steel gloves. Small injuries or, in the worst case, amputation of part of the hand can occur in the event of an accident. In this work, we propose a methodology to prevent this type of accident, which is based on the anal- ysis of the acoustic signals generated during this process. In the event of an accident, the saw touches the metal glove, the acoustic signals are processed and used to turn off the engine that drives the saw and trigger a braking system. The problem is firstly analyzed using a digital filter and then with multiresolution techniques by wavelet analysis. In addition, the empirical mode decomposition technique is also employed, which also performs multiresolution analysis of sig- nals. These three techniques are implemented and compared. The method presented a 70% of successful detection of light touches of saw/glove and 2% of false positives, when a normal cut operation is detected as a saw/glove touch, in general occurring when cutting specific parts of bone. Besides this problem, the case of eggshell crack detection is studied, where the goal was to separate cracked eggs from intact eggs using an inexpensive and efficient system. A solenoid was used as a source of mechanical excitation and the resulting acoustic signals were acquired and processed. The same signal processing techniques were employed and compared, with small changes in parameters. As a result, it was possible to detect 80% of cracked eggs and 100% of intact eggs. The multiresolution technique... (Complete abstract click electronic access below)

abstract: This dissertation proposes a miniature FIR filter that works at microwave frequencies, whose filter response can ideally be digitally programmed. Such a frequency agile device can find applications in cellular communications and wireless networking. The basic concept of the FIR filter utilizes a low loss acoustic waveguide of appropriate geometry that acts as a traveling wave tapped-delay line. The input RF signal is applied by an array of capacitive transducers at various locations on the acoustic waveguide at one end that excites waves of a propagating acoustic mode with varying spatial delays and amplitudes which interfere as they propagate. The output RF signal is picked up at the other end of the waveguide by another array of capacitive transducers. Tuning of the FIR filter coefficients is realized by controlling the DC voltage profile applied to the individual transducers which essentially shapes the overall filter response. Equivalent circuit modeling of the capacitive transducer, acoustic waveguide and transducer-line coupling is presented in this dissertation. A theoretical model for the filter is developed from a general theory of an array of transducers exciting a waveguide and is used to obtain a set of filter design equations. A MATLAB based circuit simulator is developed to simulate the filter responses. Design parameters and simulation results obtained for an example waveguide structure are presented and compared to the values estimated by the theoretical model. A waveguide structure utilizing the Rayleigh-like mode of a ridge is then introduced. A semi-analytical method to obtain propagating elastic modes of such a ridge waveguide etched in an anisotropic crystal is presented. Microfabrication of a filter based on ridges etched in single crystal Silicon is discussed along with details of the challenges faced. Finally, future work and a few alternative designs are presented that can have a better chance of success. Analysis and modeling work to this point has given a good understanding of the working principles, performance tradeoffs and fabrication pitfalls of the proposed device. With the appropriate acoustic waveguide structure, the proposed device could make it possible to realize miniature programmable FIR filters in the GHz range. / Dissertation/Thesis / Ph.D. Electrical Engineering 2013