Physicians’ understanding of bio-signals, measured using medical instruments, becomes the foundation of their decisions and diagnoses of patients, as they rely strongly on what the instruments show. Thus, it is critical and very important to ensure that the instruments’ readings exactly reflect what is happening in the patient’s body so that the detected signal is the real one or at least as close to the real in-body signal as possible and carries all of the appropriate information. This is such an important issue that sometimes physicians use invasive measurements in order to obtain the real bio-signal. Generating an in-body signal from what a measurement device shows is called “signal purification” or “reconstruction,” and can be done only when we have adequate information about the interface between the body and the monitoring device. In this research, first, we present a device that we developed for electrocardiogram (ECG) acquisition and transfer to PC. In order to evaluate the performance of the device, we use it to measure ECG and apply conductive textile as our ECG electrode. Then, we evaluate ECG signals captured by different electrodes, specifically traditional gel Ag/AgCl and dry golden plate electrodes, and compare the results. Next, we propose a method to reconstruct the ECG signal from the signal we detected with our device with respect to the interface characteristics and their relation to the detected ECG. The interface in this study is the skin-electrode interface for conductive textiles. In the last stage of this work, we explore the effects of pressure on skin-electrode interface impedance and its parametrical variation.

Physicians’ understanding of bio-signals, measured using medical instruments, becomes the foundation of their decisions and diagnoses of patients, as they rely strongly on what the instruments show. Thus, it is critical and very important to ensure that the instruments’ readings exactly reflect what is happening in the patient’s body so that the detected signal is the real one or at least as close to the real in-body signal as possible and carries all of the appropriate information. This is such an important issue that sometimes physicians use invasive measurements in order to obtain the real bio-signal. Generating an in-body signal from what a measurement device shows is called “signal purification” or “reconstruction,” and can be done only when we have adequate information about the interface between the body and the monitoring device. In this research, first, we present a device that we developed for electrocardiogram (ECG) acquisition and transfer to PC. In order to evaluate the performance of the device, we use it to measure ECG and apply conductive textile as our ECG electrode. Then, we evaluate ECG signals captured by different electrodes, specifically traditional gel Ag/AgCl and dry golden plate electrodes, and compare the results. Next, we propose a method to reconstruct the ECG signal from the signal we detected with our device with respect to the interface characteristics and their relation to the detected ECG. The interface in this study is the skin-electrode interface for conductive textiles. In the last stage of this work, we explore the effects of pressure on skin-electrode interface impedance and its parametrical variation.