Transmission of video content over wireless access networks (in particular, Wireless Local Area Networks (WLAN) and Third Generation Universal Mobile Telecommunication System (3G UMTS)) is growing exponentially and gaining popularity, and is predicted to expose new revenue streams for mobile network operators. However, the success of these video applications over wireless access networks very much depend on meeting the user’s Quality of Service (QoS) requirements. Thus, it is highly desirable to be able to predict and, if appropriate, to control video quality to meet user’s QoS requirements. Video quality is affected by distortions caused by the encoder and the wireless access network. The impact of these distortions is content dependent, but this feature has not been widely used in existing video quality prediction models. The main aim of the project is the development of novel and efficient models for video quality prediction in a non-intrusive way for low bitrate and resolution videos and to demonstrate their application in QoS-driven adaptation schemes for mobile video streaming applications. This led to five main contributions of the thesis as follows:(1) A thorough understanding of the relationships between video quality, wireless access network (UMTS and WLAN) parameters (e.g. packet/block loss, mean burst length and link bandwidth), encoder parameters (e.g. sender bitrate, frame rate) and content type is provided. An understanding of the relationships and interactions between them and their impact on video quality is important as it provides a basis for the development of non-intrusive video quality prediction models.(2) A new content classification method was proposed based on statistical tools as content type was found to be the most important parameter. (3) Efficient regression-based and artificial neural network-based learning models were developed for video quality prediction over WLAN and UMTS access networks. The models are light weight (can be implemented in real time monitoring), provide a measure for user perceived quality, without time consuming subjective tests. The models have potential applications in several other areas, including QoS control and optimization in network planning and content provisioning for network/service providers.(4) The applications of the proposed regression-based models were investigated in (i) optimization of content provisioning and network resource utilization and (ii) A new fuzzy sender bitrate adaptation scheme was presented at the sender side over WLAN and UMTS access networks. (5) Finally, Internet-based subjective tests that captured distortions caused by the encoder and the wireless access network for different types of contents were designed. The database of subjective results has been made available to research community as there is a lack of subjective video quality assessment databases.

Les avancées technologiques ont permis la commercialisation à grande échelle de terminaux mobiles. De ce fait, l’homme est de plus en plus connecté et partout. Ce nombre grandissant d’usagers du réseau ainsi que la forte croissance du contenu disponible, aussi bien d’un point de vue quantitatif que qualitatif saturent les réseaux et l’augmentation des moyens matériels (passage à la fibre optique) ne suffisent pas. Pour surmonter cela, les réseaux doivent prendre en compte le type de contenu (texte, vidéo, ...) ainsi que le contexte d’utilisation (état du réseau, capacité du terminal, ...) pour assurer une qualité d’expérience optimum. A ce sujet, la vidéo fait partie des contenus les plus critiques. Ce type de contenu est non seulement de plus en plus consommé par les utilisateurs mais est aussi l’un des plus contraignant en terme de ressources nécéssaires à sa distribution (taille serveur, bande passante, …). Adapter un contenu vidéo en fonction de l’état du réseau (ajuster son débit binaire à la bande passante) ou des capacités du terminal (s’assurer que le codec soit nativement supporté) est indispensable. Néanmoins, l’adaptation vidéo est un processus qui nécéssite beaucoup de ressources. Cela est antinomique à son utilisation à grande echelle dans les appareils à bas coûts qui constituent aujourd’hui une grande part dans l’ossature du réseau Internet. Cette thèse se concentre sur la conception d’un système d’adaptation vidéo à bas coût et temps réel qui prendrait place dans ces réseaux du futur. Après une analyse du contexte, un système d’adaptation générique est proposé et évalué en comparaison de l’état de l’art. Ce système est implémenté sur un FPGA afin d’assurer les performances (temps-réels) et la nécessité d’une solution à bas coût. Enfin, une étude sur les effets indirects de l’adaptation vidéo est menée. / On the one hand, technology advances have led to the expansion of the handheld devices market. Thanks to this expansion, people are more and more connected and more and more data are exchanged over the Internet. On the other hand, this huge amound of data imposes drastic constrains in order to achieve sufficient quality. The Internet is now showing its limits to assure such quality. To answer nowadays limitations, a next generation Internet is envisioned. This new network takes into account the content nature (video, audio, ...) and the context (network state, terminal capabilities ...) to better manage its own resources. To this extend, video manipulation is one of the key concept that is highlighted in this arising context. Video content is more and more consumed and at the same time requires more and more resources. Adapting videos to the network state (reducing its bitrate to match available bandwidth) or to the terminal capabilities (screen size, supported codecs, …) appears mandatory and is foreseen to take place in real time in networking devices such as home gateways. However, video adaptation is a resource intensive task and must be implemented using hardware accelerators to meet the desired low cost and real time constraints.In this thesis, content- and context-awareness is first analyzed to be considered at the network side. Secondly, a generic low cost video adaptation system is proposed and compared to existing solutions as a trade-off between system complexity and quality. Then, hardware conception is tackled as this system is implemented in an FPGA based architecture. Finally, this system is used to evaluate the indirect effects of video adaptation; energy consumption reduction is achieved at the terminal side by reducing video characteristics thus permitting an increased user experience for End-Users.