The thesis deals with the design and implementation of an Adaptive Flight Control technique for Unmanned Aerial Vehicles (UAVs). The application of UAVs has been increasing exponentially in the last decade both in Military and Civilian fronts. These UAVs fly at very low speeds and Reynolds numbers, have nonlinear coupling, and tend to exhibit time varying characteristics. In addition, due to the variety of missions, they fly in uncertain environments exposing themselves to unpredictable external disturbances. The successful completion of the UAV missions is largely dependent on the accuracy of the control provided by the flight controllers. Thus there is a necessity for accurate and robust flight controllers. These controllers should be able to adapt to the changes in the dynamics due to internal and external changes. From the available literature, it is known that, one of the better suited adaptive controllers is the model based controller. The design and implementation of model based adaptive controller is discussed in the thesis. A critical issue in the design and application of model based control is the online identification of the UAV dynamics from the available sensors using the onboard processing capability. For this, proper instrumentation in terms of sensors and avionics for two platforms developed at UNSW@ADFA is discussed. Using the flight data from the remotely flown platforms, state space identification and fuzzy identification are developed to mimic the UAV dynamics. Real time validations using Hardware in Loop (HIL) simulations show that both the methods are feasible for control. A finer comparison showed that the accuracy of identification using fuzzy systems is better than the state space technique. The flight tests with real time online identification confirmed the feasibility of fuzzy identification for intelligent control. Hence two adaptive controllers based on the fuzzy identification are developed. The first adaptive controller is a hybrid indirect adaptive controller that utilises the model sensitivity in addition to output error for adaptation. The feedback of the model sensitivity function to adapt the parameters of the controller is shown to have beneficial effects, both in terms of convergence and accuracy. HIL simulations applied to the control of roll stabilised pitch autopilot for a typical UAV demonstrate the improvements compared to the direct adaptive controller. Next a novel fuzzy model based inversion controller is presented. The analytical approximate inversion proposed in this thesis does not increase the computational effort. The comparisons of this controller with other controller for a benchmark problem are presented using numerical simulations. The results bring out the superiority of this technique over other techniques. The extension of the analytical inversion based controller for multiple input multiple output problem is presented for the design of roll stabilised pitch autopilot for a UAV. The results of the HIL simulations are discussed for a typical UAV. Finally, flight test results for angle of attack control of one of the UAV platforms at UNSW@ADFA are presented. The flight test results show that the adaptive controller is capable of controlling the UAV suitably in a real environment, demonstrating its robustness characteristics.

Thesis (Ph. D.)--University of Hawaii at Manoa, 2004. / Includes bibliographical references (leaves 140-155). / Also available by subscription via World Wide Web / xiii, 155 leaves, bound ill. 29 cm

This thesis presents the development of small, inexpensive unmanned aerial vehicles (UAVs) to achieve autonomous fight. Fixed wing hobby model planes are modified and instrumented to form experimental platforms. Different sensors employed to collect the flight data are discussed along with their calibrations. The time constant and delay for the servo-actuators for the platform are estimated. Two different data collection and processing units based on micro-controller and PC104 architectures are developed and discussed. These units are also used to program the identification and control algorithms. Flight control of fixed wing UAVs is a challenging task due to the coupled, time-varying, nonlinear dynamic behaviour. One of the possible alternatives for the flight control system is to use the intelligent adaptive control techniques that provide online learning capability to cope with varying dynamics and disturbances. Neural network based indirect adaptive control strategy is applied for the current work. The two main components of the adaptive control technique are the identification block and the control block. Identification provides a mathematical model for the controller to adapt to varying dynamics. Neural network based identification provides a black-box identification technique wherein a suitable network provides prediction capability based upon the past inputs and outputs. Auto-regressive neural networks are employed for this to ensure good retention capabilities for the model that uses the past outputs and inputs along with the present inputs. Online and offline identification of UAV platforms are discussed based upon the flight data. Suitable modifications to the Levenberg-Marquardt training algorithm for online training are proposed. The effect of varying the different network parameters on the performance of the network are numerically tested out. A new performance index is proposed that is shown to improve the accuracy of prediction and also reduces the training time for these networks. The identification algorithms are validated both numerically and flight tested. A hardware-in-loop simulation system has been developed to test the identification and control algorithms before flight testing to identify the problems in real time implementation on the UAVs. This is developed to keep the validation process simple and a graphical user interface is provided to visualise the UAV flight during simulations. A dual neural network controller is proposed as the adaptive controller based upon the identification models. This has two neural networks collated together. One of the neural networks is trained online to adapt to changes in the dynamics. Two feedback loops are provided as part of the overall structure that is seen to improve the accuracy. Proofs for stability analysis in the form of convergence of the identifier and controller networks based on Lyapunov's technique are presented. In this analysis suitable bounds on the rate of learning for the networks are imposed. Numerical results are presented to validate the adaptive controller for single-input single-output as well as multi-input multi-output subsystems of the UAV. Real time validation results and various flight test results confirm the feasibility of the proposed adaptive technique as a reliable tool to achieve autonomous flight. The comparison of the proposed technique with a baseline gain scheduled controller both in numerical simulations as well as test flights bring out the salient adaptive feature of the proposed technique to the time-varying, nonlinear dynamics of the UAV platforms under different flying conditions.