Spelling suggestions: "subject:"aerospace engineering."" "subject:"erospace engineering.""
211 |
Quadrotor UAV Path Following using Trajectory ShapingMehrok, Parwinder Singh 01 May 2016 (has links)
This research proposes to adapt the concept of trajectory shaping guidance law on a quadrotor to follow several different predefined, compact paths. Keeping the real world nonlinearities, sensor and process noise in mind, the technique is simulated using MATLAB-Simulink. This guidance concept is implemented on a real, custom built quadrotor for which a new testing platform was developed from the ground up. Also, the results obtained from the trajectory shaping concept are compared to the performance characteristics of another path following concept called differential flatness. In addition to this, root mean square of position error data is used to compare the vehicle convergence to the desired trajectory.
|
212 |
Dynamics and real-time optimal control of satellite attitude and satellite formation systemsYan, Hui, January 1900 (has links)
Thesis (Ph. D.)--Texas A&M University, 2006. / "Major Subject: Aerospace Engineering" Title from author supplied metadata (automated record created on Feb. 23, 2007.) Vita. Abstract. Includes bibliographical references.
|
213 |
Lard Used as a Fuel for Hybrid Rocket MotorsPfeffer, Daniel Lee 01 May 2007 (has links)
A bio-derived fuel, lard, was successfully tested using a laboratory scale hybrid rocket motor and a static test stand at the University of Tennessee-Knoxville. The experimental setup used gaseous oxygen as the oxidizer. Twenty-three experimental tests were successfully conducted with lard and oxygen. The nine-inch fuel grains used in the current investigation produced a measured thrust ranging from 70-145 Newtons (15-33 pounds) with calculated specific impulses ranging from 122-181 seconds. All the tests conducted were intensely fuel rich, and had equivalence ratios ranging from 0.2 to 0.45. The low equivalence ratios are partially due to unburned fuel particles that exit the nozzle. The tests conducted have shown that the regression rate of the lard was higher than that of other fuels, such as HTPB (hydroxyl-terminated polybutadiene), used in hybrid rocket motors. Lard has produced results similar to those obtained by researchers at Stanford University using paraffin. This investigation has provided sufficient evidence to indicate that lard merits further study as a fuel for hybrid rocket motors.
|
214 |
The effect of irregular fiber distribution and error in assumed transverse fiber CTE on thermally induced fiber/matrix interfacial stressesZu, Seung-Don, January 1900 (has links)
Thesis (M. S.)--Texas A&M University, 2005. / "Major Subject: Aerospace Engineering" Title from author supplied metadata (automated record created on Sep. 15, 2006.) Vita. Abstract. Includes bibliographical references.
|
215 |
Identification of powered parafoil-vehicle dynamics from modelling and flight test dataHur, Gi-Bong, January 1900 (has links)
Thesis (Ph. D.)--Texas A&M University, 2005. / "Major Subject: Aerospace Engineering" Title from author supplied metadata (automated record created on Sep. 15, 2006.) Vita. Abstract. Includes bibliographical references.
|
216 |
Motion planning under uncertainty application to an unmanned helicopter /Davis, Joshua Daniel, January 1900 (has links)
Thesis (M. S.)--Texas A&M University, 2006. / "Major Subject: Aerospace Engineering" Title from author supplied metadata (automated record created on Feb. 23, 2007.) Vita. Abstract. Includes bibliographical references.
|
217 |
Inter-model, analytical, and experimental validation of a heat balance based residential cooling load calculation procedureXiao, Dongyi, January 2006 (has links) (PDF)
Thesis (Ph. D.)--Oklahoma State University, 2006. / Vita. Includes bibliographical references.
|
218 |
Critical corrosion pit depth for fatigue crack initiation in 2024-T3, 6061-T6 and 7075-T6 aluminum alloys /King, William G. Jr., January 2006 (has links) (PDF)
Thesis (M. S.)--Oklahoma State University, 2006. / Vita. Includes bibliographical references.
|
219 |
Study on the development of axial stresses in wound rollsWelch, Angela De'on, January 2006 (has links) (PDF)
Thesis (M. S.)--Oklahoma State University, 2006. / Vita. Includes bibliographical references.
|
220 |
Modeling and control of a permanently magnetized sphere's motion by field manipulationDuvall, Matthew Glenn, January 2006 (has links) (PDF)
Thesis (Ph. D.)--Oklahoma State University, 2006. / Vita. Includes bibliographical references.
|
Page generated in 0.0897 seconds