Charwell Basin is a 6 km-wide structural depression situated at the boundary between the axial ranges and faulted and folded Marlborough Fault Zone of north-eastern South Island, New Zealand. The basin contains the piedmont reach of the Charwell River, and a series of late Quaternary loess-mantled alluvial terraces and terrace remnants that have been uplifted and translocated from their sediment source due to strike-slip motion along the Hope Fault which bounds the basin to its immediate north. The aim of this study was to provide an interdisciplinary, integrated and holistic analysis of late Quaternary landscape evolution and environmental change in Charwell Basin using terrain analysis, loess stratigraphy, soil chemistry and paleoecological data. The study contributes new understanding of New Zealand landscape and ecosystem responses to regional and global climatic change extending to Marine Isotope Stage (MIS) 6, and shows that climatically-forced shifts in biogeomorphic processes play a significant role in lowland landscape evolution. Morphometric analysis of alluvial terraces and terrace remnants of increasing age demonstrated geomorphic evolution through time, with a decrease in extent of original planar terrace tread morphology and an increase in frequency of steeper slopes and convexo-concave land elements. Paleotopographic analysis of a &gt150 ka terrace mantled by up to three loess sheets revealed multiple episodes of alluvial aggradation and degradation and, subsequent to river abandonment, gully incision prior to and coeval with loess accumulation. Spatial heterogeneity in loess sheet preservation showed a complex history of loess accumulation and erosion. A critical profile curvature range of -0.005 to -0.014 (d2z/dx2, m-1) for loess erosion derived from a model parameterised in different ways successfully predicted loess occurrence on adjacent slope elements, but incorrectly predicted loess occurrence on an older terrace remnant from which all loess has been eroded. Future analyses incorporating planform curvature, regolith erosivity and other landform parameters may improve identification of thresholds controlling loess occurrence in Charwell Basin and in other South Island landscapes. A loess chronostratigraphic framework was developed for, and pedogenic phases identified in, the three loess sheets mantling the &gt150 ka terrace. Except for one age, infrared-stimulated luminescence dates from both an upbuilding interfluve loess exposure and colluvial gully infill underestimated loess age with respect to the widespread Kawakawa/Oruanui Tephra (KOT; 27,097 ± 957 cal. yr BP), highlighting the need for improvements in the methodology. Onset of loess sheet 1 accumulation started at ca. 50 ka, with a break at ca. 27 ka corresponding to the extended Last Glacial Maximum (eLGM) interstadial identified elsewhere in New Zealand. Loess accumulation through MIS 3 indicates a regional loess flux, and that glaciation was not a necessary condition for loess generation in South Island. Loess accumulation and local alluvial aggradation are decoupled: the youngest aggradation event only covers ~12 kyr of the period of loess sheet 1 accumulation. Older local aggradation episodes could not be the source because their associated terraces are mantled by loess sheet 1. In the absence of numerical ages, the timing of L2 and L3 accumulation is inferred on the basis of an offshore clastic sediment record. The upbuilding phase of loess sheet 2 occurred in late MIS 5a/MIS 4, and loess sheet 3 accumulated in two phases in MIS 5b and late MIS 6. Biogenic silica data were used to reconstruct broad shifts in vegetation and changes in gully soil saturation status. During interglacial/interstadial periods (MIS 1, early MIS 3, MIS 5) Nothofagus¬-dominated forest covered the area in association with Microlaena spp grasses. Lowering of treeline altitude during glacial/stadial periods (MIS 2, MIS 3, MIS 5b, late MIS 6) led to reduction in forest cover and a mosaic of shrubs and Chionochloa spp, Festuca spp and Poa spp tussock grasses. Comparison of interfluve and gully records showed spatial heterogeneity in vegetation cover possibly related to environmental gradients of exposure or soil moisture. A post-KOT peak in gully tree phytoliths corresponds to the eLGM interstadial, and a shift to grass-dominated vegetation occurred during the LGM sensu stricto. Diatoms indicated the site became considerably wetter from ca. 36 ka, with peak wetness at ca. 30, 25 and 21 ka, possibly due to reduced evapotranspiration and/or increased precipitation from a combination of strengthened westerly winds and increased cloudiness, or strengthened southerly flow and increased precipitation. Human influence after ca. 750 yr BP led to re-establishment of grassland in the area, which deposited phytoliths mixed to 30 cm depth in the soil. A coupled gully colluvial infilling/vegetation record showed that sediment flux during the late Pleistocene was ~0.0019 m3 m-1 yr-1 under a shrubland/grassland mosaic, and Holocene sediment flux was ~0.0034 m3 m-1 yr-1 under forest. This increase of 60% through the last glacial-interglacial transition resulted from increased bioturbation and down-slope soil transport via root growth and treethrow, which formed a biomantle as evidenced by slope redistribution of the KOT. These results contrast with sediment transport rates and processes hypothesised to occur contemporaneously in adjacent mountain catchments. This suggests that intraregional biogeomorphic processes can differ significantly depending on topography and geological substrate, with different landscapes responding in unique ways to the same climate shifts. Analysis of Quaternary terrestrial landscape evolution in non-glaciated mountainous and lowland areas must therefore consider spatial and temporal heterogeneity in sediment fluxes and underlying transport processes.

Charwell Basin is a 6 km-wide structural depression situated at the boundary between the axial ranges and faulted and folded Marlborough Fault Zone of north-eastern South Island, New Zealand. The basin contains the piedmont reach of the Charwell River, and a series of late Quaternary loess-mantled alluvial terraces and terrace remnants that have been uplifted and translocated from their sediment source due to strike-slip motion along the Hope Fault which bounds the basin to its immediate north. The aim of this study was to provide an interdisciplinary, integrated and holistic analysis of late Quaternary landscape evolution and environmental change in Charwell Basin using terrain analysis, loess stratigraphy, soil chemistry and paleoecological data. The study contributes new understanding of New Zealand landscape and ecosystem responses to regional and global climatic change extending to Marine Isotope Stage (MIS) 6, and shows that climatically-forced shifts in biogeomorphic processes play a significant role in lowland landscape evolution. Morphometric analysis of alluvial terraces and terrace remnants of increasing age demonstrated geomorphic evolution through time, with a decrease in extent of original planar terrace tread morphology and an increase in frequency of steeper slopes and convexo-concave land elements. Paleotopographic analysis of a >150 ka terrace mantled by up to three loess sheets revealed multiple episodes of alluvial aggradation and degradation and, subsequent to river abandonment, gully incision prior to and coeval with loess accumulation. Spatial heterogeneity in loess sheet preservation showed a complex history of loess accumulation and erosion. A critical profile curvature range of -0.005 to -0.014 (d²z/dx², m⁻¹) for loess erosion derived from a model parameterised in different ways successfully predicted loess occurrence on adjacent slope elements, but incorrectly predicted loess occurrence on an older terrace remnant from which all loess has been eroded. Future analyses incorporating planform curvature, regolith erosivity and other landform parameters may improve identification of thresholds controlling loess occurrence in Charwell Basin and in other South Island landscapes. A loess chronostratigraphic framework was developed for, and pedogenic phases identified in, the three loess sheets mantling the >150 ka terrace. Except for one age, infrared-stimulated luminescence dates from both an upbuilding interfluve loess exposure and colluvial gully infill underestimated loess age with respect to the widespread Kawakawa/Oruanui Tephra (KOT; 27,097 ± 957 cal. yr BP), highlighting the need for improvements in the methodology. Onset of loess sheet 1 accumulation started at ca. 50 ka, with a break at ca. 27 ka corresponding to the extended Last Glacial Maximum (eLGM) interstadial identified elsewhere in New Zealand. Loess accumulation through MIS 3 indicates a regional loess flux, and that glaciation was not a necessary condition for loess generation in South Island. Loess accumulation and local alluvial aggradation are decoupled: the youngest aggradation event only covers ~12 kyr of the period of loess sheet 1 accumulation. Older local aggradation episodes could not be the source because their associated terraces are mantled by loess sheet 1. In the absence of numerical ages, the timing of L2 and L3 accumulation is inferred on the basis of an offshore clastic sediment record. The upbuilding phase of loess sheet 2 occurred in late MIS 5a/MIS 4, and loess sheet 3 accumulated in two phases in MIS 5b and late MIS 6. Biogenic silica data were used to reconstruct broad shifts in vegetation and changes in gully soil saturation status. During interglacial/interstadial periods (MIS 1, early MIS 3, MIS 5) Nothofagus-dominated forest covered the area in association with Microlaena spp grasses. Lowering of treeline altitude during glacial/stadial periods (MIS 2, MIS 3, MIS 5b, late MIS 6) led to reduction in forest cover and a mosaic of shrubs and Chionochloa spp, Festuca spp and Poa spp tussock grasses. Comparison of interfluve and gully records showed spatial heterogeneity in vegetation cover possibly related to environmental gradients of exposure or soil moisture. A post-KOT peak in gully tree phytoliths corresponds to the eLGM interstadial, and a shift to grass-dominated vegetation occurred during the LGM sensu stricto. Diatoms indicated the site became considerably wetter from ca. 36 ka, with peak wetness at ca. 30, 25 and 21 ka, possibly due to reduced evapotranspiration and/or increased precipitation from a combination of strengthened westerly winds and increased cloudiness, or strengthened southerly flow and increased precipitation. Human influence after ca. 750 yr BP led to re-establishment of grassland in the area, which deposited phytoliths mixed to 30 cm depth in the soil. A coupled gully colluvial infilling/vegetation record showed that sediment flux during the late Pleistocene was ~0.0019 m³ m⁻¹ yr⁻¹ under a shrubland/grassland mosaic, and Holocene sediment flux was ~0.0034 m³ m⁻¹ yr⁻¹ under forest. This increase of 60% through the last glacial-interglacial transition resulted from increased bioturbation and down-slope soil transport via root growth and treethrow, which formed a biomantle as evidenced by slope redistribution of the KOT. These results contrast with sediment transport rates and processes hypothesised to occur contemporaneously in adjacent mountain catchments. This suggests that intraregional biogeomorphic processes can differ significantly depending on topography and geological substrate, with different landscapes responding in unique ways to the same climate shifts. Analysis of Quaternary terrestrial landscape evolution in non-glaciated mountainous and lowland areas must therefore consider spatial and temporal heterogeneity in sediment fluxes and underlying transport processes.

The Permo-Triassic lower Beaufort Group fluvial deposits extend over 100s of kilometres within the Karoo Basin, South Africa. A detailed study of the depositional architecture and stacking patterns of sand bodies within a 900 m thick succession has enabled interpretation of the controls on ancient river channel and overbank processes. Facies include very fine- to medium-grained sandstone, intra-formational conglomerate, mudstone and palaeosols. Channel-belts are dominated by upper flow regime structures, consistent with a flashy to ephemeral fluvial system. The overbank deposits comprise splays interbedded with purple, green and grey mudstone; these floodplain colour changes signify water table fluctuations. A hierarchy of channel-related elements has been established that recognises beds, bedsets, storeys, channel-belts, complexes and complex sets. Each channel-belt may be single- or multi-storey, whereby one storey represents the complete cut and fill cycle of a single migrating river, comprising bar accretion elements and channel-abandonment fill. The abandonment fill elements often consist of heterolithic plugs of climbing ripple-laminated very fine-grained sandstone, or interbedded claystone with siltstone. The Beaufort channel-belts preserve either lateral- or downstream-accretion patterns, or a combination. Each belt has either a lenticular or tabular geometry, recognisable by an erosional base overlain by intra-formational conglomerate lag and barform deposits. Genetically related channel-belts cluster to form complexes, of which two broad styles have been identified: Type A) laterally and vertically stacked channel-belts, and Type B) sub-vertically stacked channel-belts. There is evidence of localised clustering of sub-vertically stacked channel-belts adjacent to extensive overbank mudstone deposits. The apparent lack of a well-defined ‘container’ surface with mappable margins, suggests that this stacked channel-belt architecture represents an avulsion complex rather than a palaeovalley-fill. The lateral and stratigraphic variability in fluvial-overbank architecture is interpreted as the interplay of several controls. Allogenic forcing factors include, tectonic subsidence that influences accommodation, sediment supply, and high frequency climate cycles associated with the flashy discharge regime and expressed in the mudrock colour changes and distribution of palaeosols. The depositional river style, variability in channel-belt stacking patterns and compensational stacking of some channel-belt/splay complexes is interpreted to be the result of autogenic channel avulsion, supported by an absence of significant erosion. The relative merits of basin-axial trunk river and distributive fluvial system (DFS) models are assessed from detailed architectural and stratigraphic outcrop studies.

The intermontane Ipswich Basin, which is situated 30km south-west of Brisbane, contains coal measures formed in the Late Triassic Epoch following a barren non-depositional period. Coal, tuff, and basalt were deposited along with fluvial dominated sediments. The Ipswich Coal Measures mark the resumption of deposition in eastern Australia after the coal hiatus associated with a series of intense tectonic activity in Gondwanaland during the Permo-Triassic interval. A transtensional tectonic movement at the end of the Middle Triassic deformed the Toogalawah Group before extension led to the formation of the Carnian Ipswich Coal Measures in the east. The Ipswich Coal Measures comprise the Brassall and Kholo Subgroups. The Blackstone Formation, which forms the upper unit of the Brassall Subgroup, contains seven major coal seams. The lower unit of the Brassall Subgroup, the Tivoli Formation, consists of sixteen stratigraphically significant coal seams. The typical thickness of the Blackstone Formation is 240m and the Tivoli Formation is about 500m. The coal seams of the Ipswich Basin differ considerably from those of other continental Triassic basins. However, the coal geology has previously attracted little academic attention and the remaining exposures of the Ipswich coalfield are rapidly disappearing now that mining has ceased. The primary aim of this project was to study the patterns of coal sedimentation and the response of coal seam characteristics to changing depositional environments. The coal accumulated as a peat-mire in an alluvial plain with meandering channel systems. Two types of peat-mire expansion occurred in the basin. Peat-mire aggradation, which is a replacement of water body by the peatmire, was initiated by tectonic subsidence. This type of peat-mire expansion is known as terrestrialisation. It formed thick but laterally limited coal seams in the basin. Whereas, peat-mire progradation was related to paludification and produced widespread coal accumulation in the basin. The coal seams were separated into three main groups based on the mean seam thickness and aerial distribution of one-meter and four-meter thickness contour intervals. Group 1 seams within the one-meter thickness interval are up to 15,000m2 in area, and seams within the four-meter interval have an aerial extent of up to 10,000m2. Group 1A contains the oldest seam with numerous intraseam clastic bands and shows a very high thickness to area ratio, which indicates high subsidence rates. Group 1B seams have moderately high thickness to area ratios. The lower clastic influx and slower subsidence rates favoured peat-mire aggradation. The Group 1A seam is relatively more widespread in aerial extent than seams from Group 1B. Group 1C seams have low mean thicknesses and small areas, suggesting short-lived peat-mires as a result of high clastic influx. Group 2 seams arebetween 15,000 and 35,000m2 in area within the one-meter interval, and between 5,000 and 10,000m2 within the four-meter interval. They have moderately high area to thickness ratios, indicating that peat-mire expansion occurred due to progressively shallower accommodation and a rising groundwater table. Group 3 seams, which have aerial extents from 35,000 to 45,000m2 within the one-meter thickness contour interval and from 10,000 to 25,000m2 within the four-meter interval, show high aerial extent to thickness ratios. They were deposited in quiet depositional environments that favoured prolonged existence of peat-mires. Group 3 seams are all relatively young whereas most Group 1 seams are relatively old seams. All the major fault systems, F1, F2 and F3, trend northwest-southeast. Apart from the West Ipswich Fault (F3), the F1 and F2 systems are broad Palaeozoic basement structures and thus they may not have had a direct influence on the formation of the much younger coal measures. However, the sedimentation patterns appear to relate to these major fault systems. Depocentres of earlier seams in the Tivoli Formation were restricted to the northern part of the basin, marked by the F1 system. A major depocentre shift occurred before the end of the deposition of the Tivoli Formation as a result of subsidence in the south that conformed to the F2 system configuration. The Blackstone Formation depocentres shifted to the east (Depocentre 1) and west (Depocentre 2) simultaneously. This depocentre shift was associated with the flexural subsidence produced by the rejuvenation of the West Ipswich Fault. Coal accumulation mainly occurred in Depocentre 1. Two types of seam splitting occurred in the Ipswich Basin. Sedimentary splitting or autosedimentation was produced by frequent influx of clastic sediments. The fluvial dominant depositional environments created the random distribution of small seam splits. However, the coincidence of seam splits and depocentres found in some of the seams suggests tectonic splitting. Furthermore, the progressive splitting pattern, which displays seam splits overlapping, was associated with continued basin subsidence. The tectonic splitting pattern is more dominant in the Ipswich Basin. Alternating bright bands shown in the brightness profiles are a result of oscillating water cover in the peat-mire. Moderate groundwater level, which was maintained during the development of the peat, reduced the possibility of salinisation and drowning of the peat swamp. On the other hand, a slow continuous rise of the groundwater table, that kept pace with the vertical growth of peat, prevented excessive oxidation of peat. Ipswich coal is bright due to its high vitrinite content. The cutinite content is also high because the dominant flora was pteridosperms of Dicroidium assemblage containing waxy and thick cuticles. Petrographic study revealed that the depositional environment was telmatic with bog forest formed under ombrotrophic to mesotrophic hydrological conditions. The high preservation of woody or structured macerals such as telovitrinite and semifusinite indicates that coal is autochthonous. The high mineral matter content in coal is possibly due to the frequent influx of clastic and volcanic sediments. The Ipswich Basin is part of a much larger Triassic basin extending to Nymboida in New South Wales. Little is known of the coal as it lacks exposures. It is apparently thin to absent except in places like Ipswich and Nymboida. This study suggests that the dominant control on depocentres of thick coal at Ipswich has been the tectonism. Fluvial incursions and volcanism were superimposed on this.