• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 4
  • 1
  • Tagged with
  • 5
  • 5
  • 4
  • 4
  • 4
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Thermoelastic control of adaptive composites for aerospace applications using embedded nitinol actuators

Lenahan, Kristie M. 01 October 2008 (has links)
Aerospace structures have stringent pointing and shape control requirements during long-term exposure to a hostile environment with no scheduled maintenance. This makes them excellent candidates for a smart structures approach as current passive techniques prove insufficient. This study investigates the feasibility of providing autonomous dimensional control to aerospace structures by embedding shape memory alloy elements inside composite structures. Increasing volume fractions of nitinol wire were embedded in cross-ply graphite/ epoxy composite panels. The potential of this approach was evaluated by measuring the change in longitudinal strain with increasing temperature and volume fraction. Reduction of thermal expansion is demonstrated and related to embedded volume fraction. Classical lamination theory is used to formulate a two-dimensional model which included the adaptive properties of the embedded nitinol. The model was used to predict the increased modulus and reduction of thermal strain in the modified plates which was verified by the experimental data. / Master of Science
2

Fadiga termomecânica em ligas de ferro fundido cinzento para discos de freio automotivos / Thermomechanical fatigue in gray cast iron alloys to automotive brake discs

Maluf, Omar 18 May 2007 (has links)
Os discos de freio, durante a frenagem, são submetidos a tensões térmicas e mecânicas que podem ser relativamente altas quando muito bruscas (frações de segundo), situação em que a temperatura pode chegar a valores próximos de 600ºC. Esta variação de temperatura provoca choques térmicos que podem gerar trincas e/ou uma grande quantidade de deformação plástica no disco. A proposta deste trabalho foi a de investigar, através de experimentos, o comportamento mecânico e físico em quatro ligas de ferro fundido cinzento (A, B, C e E), utilizadas para produzir discos de freio de veículos automotivos. Para tanto, foram realizados ensaios termomecânicos de baixo ciclo em corpos de prova, entre 300ºC e 600ºC, nas condições em fase e fora de fase, adotando o critério de falha em 50% da tensão máxima (ASTM E-606) e em componentes (discos), além daqueles de difusividade térmica desde a temperatura ambiente até 600ºC. As curvas deformação em função da vida ( N) foram obtidas e analisadas segundo norma ASTM E 466/468. A análise microestrutural nos corpos de prova e peças, após os ensaios de fadiga, serviu para revelar a influência da morfologia e quantidade de grafita e da matriz sobre as propriedades mecânicas. A medição das difusividades térmicas teve como objetivo a verificação da influência do carbono equivalente e dos elementos de liga sobre esta propriedade física. Observou-se que, durante os ensaios de fadiga termomecânica em fase, em função da decomposição de parcela da cementita da perlita, houve, nos materiais, a chamada expansão grafítica, que teve influência na parte trativa do ciclo, diminuindo as tensões necessárias para se alcançar determinadas amplitudes de tensão mecânica. Pelos gráficos de amplitude de deformação mecânica em função do número de reversos para falhar, sob fadiga termomecânica em fase e fora de fase, observou-se que a melhor liga de ferro fundido cinzento foi a liga E. Esta constatação implicará em uma significativa redução dos custos de produção dos discos de freio, pois se poderá prescindir do elemento de liga Molibdênio, extremamente caro. Comparando-se os resultados de fadiga termomecânica com os de fadiga isotérmica a 25ºC, 300ºC e 600ºC, pôde-se verificar que os ensaios mais críticos foram os fora de fase, pois conduziram, comparativamente, a vidas menores. / Brake discs are submitted to thermal and mechanical stress that can be relatively high during abrupt braking action happens (fractions of seconds), causing the temperature to reach values as high as 600ºC. This temperature variation results in thermal shocks that can generate cracks and/or a large amount of plastic deformation in the disk. The main aim of this work was to investigate, through experiments, the mechanical and physical behavior of four alloys of gray cast iron (A, B, C and E), used to produce brake discs of automotives vehicles. Low cycle thermomechanical fatigue tests were carried out in components (discs) and in test specimens, between 300ºC and 600ºC, in the conditions in-phase and out-of-phase, adopting the failure criterion of 50% drop of the maximum tensile stress (ASTM E - 606). Thermal diffusivity values were measured from room temperature up to 600oC in order to analyze the effects of carbon content and alloying elements in physical properties. Curves -N were obtained and analyzed according to ASTM E 466/468 standard. Microstructural analysis was employed to reveal the influence of the matrix and morphology/amount of graphite on the mechanical properties. It was observed that, during in-phase thermomechanical fatigue tests, the volume expansion due to cementite decomposition into graphite and ferrite caused a decrease in the tensile stress necessary to achieve the mechanical strain imposed during tests. From M/2 x 2Nf graphs it was inferred that alloy E presented the best performance both in in-phase and out-of phase tests. The lack of Mo in this alloy implies in a significant reduction of cost production of the brake discs, due to the high cost of such alloying element. Out-of-phase thermomechanical fatigue tests resulted in shorter lives compared to isothermal fatigue tests carried out at 25ºC, 300ºC and 600ºC.
3

Influência dos elementos de liga Cu-Ni-Mo nas propriedades mecânicas e na austemperabilidade do ADI / Influence of alloys elements Cu-Ni-Mo on mechanical properties and austemperability of ADI.

Mattar Junior, Aristides Rodrigues 30 April 2009 (has links)
O ADI constitui-se no desenvolvimento mais recente na família dos ferros fundidos nodulares. Com o tratamento de austêmpera, consegue-se produzir uma microestrutura única, constituída de ferrita acicular e austenita estável rica em carbono, a ausferrita, proporcionando alta resistência mecânica aliada à ductilidade e tenacidade, além de boa resistência à fadiga e ao desgaste. Neste trabalho estudou-se o efeito dos elementos de liga Cu, Ni e Mo nas propriedades mecânicas e austemperabilidade do ADI. Foram produzidas barras cilíndricas de ferros fundidos nodulares nos diâmetros de Ø2, Ø3 e Ø4 ligadas com Cu, Cu-Ni, Cu-Ni- Mo respectivamente. Os corpos de prova utilizados nos ensaios de tração, impacto e microdesgaste foram retirados a meio-raio das barras. Posteriormente, cada conjunto de corpo de prova foi austenitizado a 890°C durante 2 horas, sendo em seguida submetido a uma condição de tratamento de austêmpera específica, combinando temperaturas de austêmpera de 300 e 360°C e tempos de 1, 2, 3 e 4 horas. Realizou-se análises microestruturais ópticas e por microscopia eletrônica de varredura para correlacionar propriedades mecânicas com a microestrutura. Na análise de austemperabilidade, as barras cilíndricas foram austemperadas para verificar a variação de microestrutura em função do raio da barra. Verificou-se que a temperatura de austêmpera exerce forte influência na microestrutura do ADI e consequentemente nas propriedades de tração, ductilidade, tenacidade e resistência ao desgaste. Nos tratamentos a 300°C obteve-se uma microestrutura mais refinada, com maior quantidade de ferrita acicular, responsável pela maior resistência mecânica e resistência ao desgaste; enquanto que no tratamento realizado a 360°C obteve-se uma microestrutura mais grosseira, com maior quantidade de austenita estável, responsável pela melhor ductilidade e tenacidade. Nos tempos de austêmpera analisados, não ocorreram variações significativas nas microestruturas e propriedades mecânicas. A resistência mecânica e a tenacidade decresceram com a adição de Mo, provavelmente devido à segregação deste elemento, mas a resistência ao desgaste a seco e a austemperabilidade foram mais efetivas em comparação com ligas contendo Cu e Cu-Ni. No ensaio de desgaste usando-se lubrificante, o ADI ligado com Cu-Ni austemperado a 360°C apresentou uma resistência ao desgaste um pouco inferior a de um aço 17CrNiMo6 cementado. / The ADI is the most recent development in the nodular iron family. With the austempering treatment, a unique microstructure, consisting of acicular bainite ferrite and stable austenite rich in carbon, named ausferrite is produced. This microstructure provides high mechanical strength combined with ductility, toughness and good fatigue and wear resistances. In this work, the effect of alloying elements Cu, Ni and Mo on the mechanical properties and austemperability of the ADI were studied. To conduct these studies, cylindrical bars with diameters of Ø2\", Ø3\" and Ø4\" were cast with Cu, Cu-Ni and Cu-Ni-Mo alloying, respectively. The samples were then manufactured by removing specimens from the bar midradius position. Subsequently, each set of the samples was austenitized at 890°C for 2 hours, and then subjected different conditions of austempering treatment. These treatments were developed by combining austempering temperatures of 300 and 360°C with austempering times of 1, 2, 3 and 4 hours. Microstructural analysis was carried out using optical and scanning electron microscopy to correlate mechanical properties with the microstructure. In the austemperability analysis, cylindrical bars were austempered (at 360°C for 3 hours) to correlate microstructure and radius. The experimental results showed that the austempering temperature exerts strong influence on the ADI´s microstructure and consequently on the mechanical properties. The austempering temperature of 300°C produced the best results, a refined microstructure, with a greater amount of acicular ferrite, responsible for greater strength and wear resistance. The austempering temperature of 360°C produced a coarse microstructure, with larger amount of austenite and responsible for better ductility and toughness. The austempering times used in this work did not produce significant variations in the properties and microstructures. Regarding alloying elements, the mechanical strength and toughness decreased with the addition of Mo, probably due to the segregation of this element, but the wear resistance and austemperability were more effective when compared with the alloys containing Cu and Cu-Ni. In the lubricated wear test, the ADI alloyed with Cu-Ni and austempered at 360°C presented a wear resistance only a fraction lower than a cemented 17CrNiMo6 steel.
4

Influência dos elementos de liga Cu-Ni-Mo nas propriedades mecânicas e na austemperabilidade do ADI / Influence of alloys elements Cu-Ni-Mo on mechanical properties and austemperability of ADI.

Aristides Rodrigues Mattar Junior 30 April 2009 (has links)
O ADI constitui-se no desenvolvimento mais recente na família dos ferros fundidos nodulares. Com o tratamento de austêmpera, consegue-se produzir uma microestrutura única, constituída de ferrita acicular e austenita estável rica em carbono, a ausferrita, proporcionando alta resistência mecânica aliada à ductilidade e tenacidade, além de boa resistência à fadiga e ao desgaste. Neste trabalho estudou-se o efeito dos elementos de liga Cu, Ni e Mo nas propriedades mecânicas e austemperabilidade do ADI. Foram produzidas barras cilíndricas de ferros fundidos nodulares nos diâmetros de Ø2, Ø3 e Ø4 ligadas com Cu, Cu-Ni, Cu-Ni- Mo respectivamente. Os corpos de prova utilizados nos ensaios de tração, impacto e microdesgaste foram retirados a meio-raio das barras. Posteriormente, cada conjunto de corpo de prova foi austenitizado a 890°C durante 2 horas, sendo em seguida submetido a uma condição de tratamento de austêmpera específica, combinando temperaturas de austêmpera de 300 e 360°C e tempos de 1, 2, 3 e 4 horas. Realizou-se análises microestruturais ópticas e por microscopia eletrônica de varredura para correlacionar propriedades mecânicas com a microestrutura. Na análise de austemperabilidade, as barras cilíndricas foram austemperadas para verificar a variação de microestrutura em função do raio da barra. Verificou-se que a temperatura de austêmpera exerce forte influência na microestrutura do ADI e consequentemente nas propriedades de tração, ductilidade, tenacidade e resistência ao desgaste. Nos tratamentos a 300°C obteve-se uma microestrutura mais refinada, com maior quantidade de ferrita acicular, responsável pela maior resistência mecânica e resistência ao desgaste; enquanto que no tratamento realizado a 360°C obteve-se uma microestrutura mais grosseira, com maior quantidade de austenita estável, responsável pela melhor ductilidade e tenacidade. Nos tempos de austêmpera analisados, não ocorreram variações significativas nas microestruturas e propriedades mecânicas. A resistência mecânica e a tenacidade decresceram com a adição de Mo, provavelmente devido à segregação deste elemento, mas a resistência ao desgaste a seco e a austemperabilidade foram mais efetivas em comparação com ligas contendo Cu e Cu-Ni. No ensaio de desgaste usando-se lubrificante, o ADI ligado com Cu-Ni austemperado a 360°C apresentou uma resistência ao desgaste um pouco inferior a de um aço 17CrNiMo6 cementado. / The ADI is the most recent development in the nodular iron family. With the austempering treatment, a unique microstructure, consisting of acicular bainite ferrite and stable austenite rich in carbon, named ausferrite is produced. This microstructure provides high mechanical strength combined with ductility, toughness and good fatigue and wear resistances. In this work, the effect of alloying elements Cu, Ni and Mo on the mechanical properties and austemperability of the ADI were studied. To conduct these studies, cylindrical bars with diameters of Ø2\", Ø3\" and Ø4\" were cast with Cu, Cu-Ni and Cu-Ni-Mo alloying, respectively. The samples were then manufactured by removing specimens from the bar midradius position. Subsequently, each set of the samples was austenitized at 890°C for 2 hours, and then subjected different conditions of austempering treatment. These treatments were developed by combining austempering temperatures of 300 and 360°C with austempering times of 1, 2, 3 and 4 hours. Microstructural analysis was carried out using optical and scanning electron microscopy to correlate mechanical properties with the microstructure. In the austemperability analysis, cylindrical bars were austempered (at 360°C for 3 hours) to correlate microstructure and radius. The experimental results showed that the austempering temperature exerts strong influence on the ADI´s microstructure and consequently on the mechanical properties. The austempering temperature of 300°C produced the best results, a refined microstructure, with a greater amount of acicular ferrite, responsible for greater strength and wear resistance. The austempering temperature of 360°C produced a coarse microstructure, with larger amount of austenite and responsible for better ductility and toughness. The austempering times used in this work did not produce significant variations in the properties and microstructures. Regarding alloying elements, the mechanical strength and toughness decreased with the addition of Mo, probably due to the segregation of this element, but the wear resistance and austemperability were more effective when compared with the alloys containing Cu and Cu-Ni. In the lubricated wear test, the ADI alloyed with Cu-Ni and austempered at 360°C presented a wear resistance only a fraction lower than a cemented 17CrNiMo6 steel.
5

Fadiga termomecânica em ligas de ferro fundido cinzento para discos de freio automotivos / Thermomechanical fatigue in gray cast iron alloys to automotive brake discs

Omar Maluf 18 May 2007 (has links)
Os discos de freio, durante a frenagem, são submetidos a tensões térmicas e mecânicas que podem ser relativamente altas quando muito bruscas (frações de segundo), situação em que a temperatura pode chegar a valores próximos de 600ºC. Esta variação de temperatura provoca choques térmicos que podem gerar trincas e/ou uma grande quantidade de deformação plástica no disco. A proposta deste trabalho foi a de investigar, através de experimentos, o comportamento mecânico e físico em quatro ligas de ferro fundido cinzento (A, B, C e E), utilizadas para produzir discos de freio de veículos automotivos. Para tanto, foram realizados ensaios termomecânicos de baixo ciclo em corpos de prova, entre 300ºC e 600ºC, nas condições em fase e fora de fase, adotando o critério de falha em 50% da tensão máxima (ASTM E-606) e em componentes (discos), além daqueles de difusividade térmica desde a temperatura ambiente até 600ºC. As curvas deformação em função da vida ( N) foram obtidas e analisadas segundo norma ASTM E 466/468. A análise microestrutural nos corpos de prova e peças, após os ensaios de fadiga, serviu para revelar a influência da morfologia e quantidade de grafita e da matriz sobre as propriedades mecânicas. A medição das difusividades térmicas teve como objetivo a verificação da influência do carbono equivalente e dos elementos de liga sobre esta propriedade física. Observou-se que, durante os ensaios de fadiga termomecânica em fase, em função da decomposição de parcela da cementita da perlita, houve, nos materiais, a chamada expansão grafítica, que teve influência na parte trativa do ciclo, diminuindo as tensões necessárias para se alcançar determinadas amplitudes de tensão mecânica. Pelos gráficos de amplitude de deformação mecânica em função do número de reversos para falhar, sob fadiga termomecânica em fase e fora de fase, observou-se que a melhor liga de ferro fundido cinzento foi a liga E. Esta constatação implicará em uma significativa redução dos custos de produção dos discos de freio, pois se poderá prescindir do elemento de liga Molibdênio, extremamente caro. Comparando-se os resultados de fadiga termomecânica com os de fadiga isotérmica a 25ºC, 300ºC e 600ºC, pôde-se verificar que os ensaios mais críticos foram os fora de fase, pois conduziram, comparativamente, a vidas menores. / Brake discs are submitted to thermal and mechanical stress that can be relatively high during abrupt braking action happens (fractions of seconds), causing the temperature to reach values as high as 600ºC. This temperature variation results in thermal shocks that can generate cracks and/or a large amount of plastic deformation in the disk. The main aim of this work was to investigate, through experiments, the mechanical and physical behavior of four alloys of gray cast iron (A, B, C and E), used to produce brake discs of automotives vehicles. Low cycle thermomechanical fatigue tests were carried out in components (discs) and in test specimens, between 300ºC and 600ºC, in the conditions in-phase and out-of-phase, adopting the failure criterion of 50% drop of the maximum tensile stress (ASTM E - 606). Thermal diffusivity values were measured from room temperature up to 600oC in order to analyze the effects of carbon content and alloying elements in physical properties. Curves -N were obtained and analyzed according to ASTM E 466/468 standard. Microstructural analysis was employed to reveal the influence of the matrix and morphology/amount of graphite on the mechanical properties. It was observed that, during in-phase thermomechanical fatigue tests, the volume expansion due to cementite decomposition into graphite and ferrite caused a decrease in the tensile stress necessary to achieve the mechanical strain imposed during tests. From M/2 x 2Nf graphs it was inferred that alloy E presented the best performance both in in-phase and out-of phase tests. The lack of Mo in this alloy implies in a significant reduction of cost production of the brake discs, due to the high cost of such alloying element. Out-of-phase thermomechanical fatigue tests resulted in shorter lives compared to isothermal fatigue tests carried out at 25ºC, 300ºC and 600ºC.

Page generated in 0.0809 seconds