Spelling suggestions: "subject:"aluminum plants"" "subject:"fluminum plants""
1 |
Physicochemical Characteristics and Source Apportionment of Suspended Particles in an Aluminium Planthwang, ming-her 27 August 2004 (has links)
The objective of the study was to investigate the air pollution of working place and the fence of aluminum plants. Four sites were selected for conducting the sampling of particulate matter¡]PM¡^to establish the fingerprints of PM in aluminum plants. Moreover, the receptor model was used to apportion the major contributing sources of particulate matter.
The results of the study showed that PM concentrations in the working places were high, which might be emitted from manufacturing or mechanical operating process in the melting furnace, the continuous casting, and etc. The total suspended solid concentrations from non-combustion pollution source ¡]such as hot rolling , cold rolling, and plate industry¡^ were usually below 200 µg /m3. Moreover, the size distributions of PM in working places were usually bi-modal type. The particle sizes with the highest concentration in five and coarse fractions were 0.18~0.56 µm respectively. As for the combustion sources, the particle sizes with the highest concentration were 0.56~1.0 µm and 11.5~24.7 µm, respectively. The particle emitted from zinc casting source were mostly in the fine particle fraction¡]1.0~3.2 µm¡^.
The fingerprint profiles of PM from the working places showed that the major metal content of the hot rolling were Al, Zn, K, Cr. Among then, Cr might be source of from the using of chromate acid. The most abundant water-soluble ions were sulfate ion and chlorine and chloride. The carbon content accounted for about 22% of the PM mass. The ratio of organic carbon to elemental carbon were 2.54 and 2.80. The major metal content of melting process was Al, the minor metals were Zn, k, Ca, Fe. The ratio of anion to cation¡]A/C¡^ was about 0.80. The most abundant ion sulfate, while the chloride, the fluoride, potassium, and the ammonium ions were minor ones. The carbon content accounted about 19.2% and 27.3% of PM mass respectively. The ratio of organic carbon to elemental carbon were 1.21 and 1.07. Moreover, the major metals were k, Ca, Fe. The major ion was chloride, while the nitrate calcium and potassium ions were minor ones. The A/C was 0.7. The carbon content accounted for 54.8% and 51.0% of PM2.5 and PM10, respectively. The ratio of organic carbon to elemental carbon was about 2.9.
The results obtained from receptor modeling showed that the contribution percentage of fugitive PM from the aluminum plant (including hot rolling, melting furnace, and low-wave furnace) was between 5.9 and 13.2%, Another major source was traffic refracted pollution with a contribution percentage between 17.0% and 23.0%, Fur then more, in the surrounding PM, was between 11.2% and 20.7%, while the contribution from the steel plant and Moreover, the municipal incineration was 2.5~6.5% and 2.3~5.0%,respectively. The sea salt contributed 4.3~7.1% of PM mass. The unsolved percentage was 7.0~11.8%.
|
2 |
The interrelationships of electric utilities and energy intensive industries : the case of the primary aluminum industryRadke, William Henry 12 1900 (has links)
No description available.
|
3 |
Use of bauxite refining residue to reduce the mobility of heavy metals in municipal waste compost.harriehofstede@yahoo.com, Henricus T Hofstede January 1994 (has links)
Use of bauxite refining residue to reduce the mobility of heavy metals in municipal waste compost.
Due to the adverse environmental impact of landfills and the lack of space for nearby population centres an unprecedented interest has developed in waste recycling with the objective to reduce the volume of waste disposed. Generally organic matter represents the largest fraction in the domestic waste stream including food, garden and paper waste.
In the past efforts have been made to process this organic fraction into muniapal compost.However contamination of the compost with heavy metals has in many cases resulted in the lack of suitable markets and subsequent closure of compost facilities. A study was undertaken and aimed at reducing the concentration and mobility of heavy metals in
municipal compost.
Bauxite refining residue ha; a high capacity to immobilise metals in soils through
precipitation, cation exchange and chemisorption (Fe- and Al- oxides).
The first step in the study was to assess the metal adsorption capacity of red mud by equilibrating red mud with metal solutions. Metal removal from solution proved very high.
Subsequently, the effect of red mud addition to municipal compost was studied in relation to metal mobility. In particular the interaction of metals with the mobile soluble organic fraction, the humic and fulvic acids, was investigated. It was found that most metals remained in the insoluble humin fraction and the metals in solution remained complexed to the soluble organic fraction. Red mud appeared to be able to adsorp fulvic and humic acids
and thus indirectly immobilise the metals in solution. Red mud did not appear to be able to transfer metals from the organic fraction to the mineral red mud fraction.
ft was kypothesised that, in order for the metals to be adsorped to red mud, the red mud needed to be present in the organic waste prior to composting. Metal adsorption to red mud is a rapid chemical reaction while metal complexation to the organic fraction takes a number of weeks, since it must be sufficiently oxidised to contain functional groups.
In order to verify this hypothesis, an installation with seven incubators was developed which allowed composting to be undertaken under computer controlled conditions and
monitored for temperature, airflow and carbon dioxide respiration. The incubators were filled with 10 kg of a mixture of grass clippings and sawdust. The first incubator functioned as a control. The contents of the rest of the incubators were spiked with the following
metals: Cd, Cr, Cu, Ni, Pb and Zn. In addition the contents of the 3rd - 7th incubators were amended with an increasing percentage of red mud, respectively 10,20,25,30 and 40 % by weight. After the mixture was composted, the metal mobility was reduced by approx. 80 - 99 %, depending on the metal. The mobility was assessed as leachable and plant available in relation to the total metal content. Red mud did not affect the composting process if < 40% red mud was added.
The next step was to compost municipal organic waste in a pilot plant (capacity 5 m3) using batches with and without red mud. Mixed waste was collected from 150 households and
the glass, metal and plastic fractions were removed bx- manual sorting. The rest was composted.
The red mud - compost had a relatively lower metal content and a reduced metal mobility compared to compost without red mud. The red mud - compost also had a 300 times higher
pH buffer capacity and 90%less soluble organic matter.
The addition of red mud prior to composting was found to reduce the concentration and mobility of metals in compost, improve the quality of compost as a soil conditioner, increased the resistance of the organic fraction against further breakdown and this process
thus adds value to both red mud and organic waste.
|
4 |
Factors controlling Al accumulation in plants : effects of phylogeny, soil conditions and external nutrient supplyMetali, Faizah Haji January 2010 (has links)
I used a data-set of 986 plant species (from 493 genera in 195 families) obtained from a literature search and a new data collection for 58 tropical tree species (from 31 genera in 18 families) growing in two contrasting forest types in Brunei Darussalam: mixed dipterocarp forest on moderately infertile ultisols and fluvisols, and heath forest on acidic and nutrient-poor spodosols. I provide statistical evidence for the existence of discreet groups of species representing Al accumulators and non-Al accumulator based on foliar Al concentrations. The threshold foliar Al concentration was higher for tropical plants (range 2.3-3.9 mg Al g<sup>-1</sup>) than temperate plant (1.1 mg Al g<sup>-1</sup>). Species’ mean log foliar Al concentration was also higher for tropical (0.73 ± 1.11 mg Al g<sup>-1</sup>) than temperate plants (0.16 ± 1.07 mg Al g<sup>-1</sup>). I used the tropical Al accumulating shrub <i>Melastoma malabathricum </i>L. as a study species to test the hypotheses that growth would be stimulated by Al addition. Growth of <i>M. malabathricum </i>seedlings was stimulated by Al addition when the external supply of macronutrients was very low, and this growth response was associated with an increase in net assimilation rate and specific leaf area. Foliar Al concentration was positively correlated with foliar concentrations of Ca and Mg across 16 Al accumulator species sampled in the field study in Brunei Darussalam, while foliar Al and K concentrations were correlated positively in <i>M. malabathricum </i>seedlings growing in the solution culture experiments. These positive correlations contradict the hypothesis that Al inhibits the uptake of nutrient cations and they may contribute to the positive growth response to Al addition in Al accumulator plants.
|
5 |
The Evaluation of heat stress indices using physiological comparisons in an alumina refinery in a sub-tropical climate.Di Corleto, Ross, mikewood@deakin.edu.au January 1998 (has links)
The production of alumina involves the use of a process known as the Bayer process. This method involves the digestion of raw bauxite in sodium hydroxide at temperatures around 250°C. The resultant pregnant liquor then goes through a number of filtering and precipitation processes to obtain the aluminium oxide crystals which are then calcined to obtain the final product. The plant is situated in a sub tropical climate in Northern Australia and this combined with the hot nature of the process results in a potential for heat related illnesses to develop. When assessing a work environment for heat stress a heat stress index is often employed as a guideline and to date the Wet Bulb Globe Temperature (WBGT) has been the recommended index. There have been concerns over the past that the WBGT is not suited to the Northern Australian climate and in fact studies in other countries have suggested this is the case. This study was undertaken in the alumina plant situated in Gladstone Queensland to assess if WBGT was in fact the most suitable index for use or if another was more applicable. To this end three indices, Wet Bulb Globe Temperature (WBGT), Heat Stress Index (HSI) and Required Sweat Rate (SWreq) were compared and assessed using physiological monitoring of heart rate and surrogate core temperature.
A number of different jobs and locations around the plant were investigated utilising personal and environmental monitoring equipment. These results were then collated and analysed using a computer program written as part of the study for the manipulation of the environmental data . Physiological assessment was carried out using methods approved by international bodies such as National Institute for Occupational Safety & Health (NIOSH) and International Standards Organisation (ISO) and incorporated the use of a Physiological Factor developed to enable the comparison of predicted allowable exposure times and strain on the individual.
Results indicated that of the three indices tested, Required Sweat Rate was found to be the most suitable for the climate and in the environment of interest. The WBGT system was suitable in areas in the moderate temperature range (ie 28 to 32°C) but had some deficiencies above this temperature or where the relative humidity exceeded approximately 80%. It was however suitable as a first estimate or first line indicator. HSI over-estimated the physiological strain in situations of high temperatures, low air flows and exaggerated the benefit of artificial air flows on the worker in certain environments ie. fans.
|
6 |
Modern control theory application in mill main drive designKopeloff, Leonardo January 1985 (has links)
Modern Control Theory is applied to analyze an existing aluminum mill drive, which was originally designed by Classical Methods.
The system is studied with Optimal Control and z-transform zero-pole locus tools.
The results and also the original design are compared with the performance of simulation. The models are built with the transition matrix and iterative procedures.
Conclusions about the appropriated design methods and improvements to the control scheme result from the investigation. / Master of Science / incomplete_metadata
|
Page generated in 0.0367 seconds