Made available in DSpace on 2015-03-13T17:08:12Z (GMT). No. of bitstreams: 1 KatianeSS_capa_ate_secao3.pdf: 4061338 bytes, checksum: 28febddb7031b2403525b3cbefed2d05 (MD5) Previous issue date: 2007-03-30 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Baixo Vermelho area, situated on the northern portion of Umbuzeiro Graben (onshore Potiguar Basin), represents a typical example of a rift basin, characterized, in subsurface, by the sedimentary rift sequence, correlated to Pend?ncia Formation (Valanginian-Barremian), and by the Carnaubais fault system. In this context, two main goals, the stratigraphic and the structural analysis, had guided the research. For this purpose, it was used the 3D seismic volume and eight wells located in the study area and adjacencies. The stratigraphic analysis of the Valanginian-Barremian interval was carried through in two distinct phases, 1D and 2D, in which the basic concepts of the sequence stratigraphy had been adapted. In these phases, the individual analysis of each well and the correlation between them, allowed to recognize the main lithofacies, to interpret the effective depositional systems and to identify the genetic units and key-surfaces of chronostratigraphic character. The analyzed lithofacies are represented predominantly by conglomerates, sandstones, siltites and shales, with carbonate rocks and marls occurring subordinately. According to these lithofacies associations, it is possible to interpret the following depositional systems: alluvial fan, fluvio-deltaic and lacustrine depositional systems. The alluvial fan system is mainly composed by conglomerates deposits, which had developed, preferentially in the south portion of the area, being directly associated to Carnaubais fault system. The fluvial-deltaic system, in turn, was mainly developed in the northwest portion of the area, at the flexural edge, being characterized by coarse sandstones with shales and siltites intercalated. On the other hand, the lacustrine system, the most dominant one in the study area, is formed mainly by shales that could occur intercalated with thin layers of fine to very fine sandstones, interpreted as turbidite deposits. The recognized sequence stratigraphy units in the wells are represented by parasequence sets, systems tracts and depositional sequences. The parasequence sets, which are progradational or retrogradational, had been grouped and related to the systems tracts. The predominance of the progradation parasequence sets (general trend with coarsening-upward) characterizes the Regressive Systems Tract, while the occurrence, more frequently, of the retrogradation parasequence sets (general trend with finning-upward) represents the Transgressive System Tract. In the seismic stratigraphic analysis, the lithofacies described in the wells had been related to chaotic, progradational and parallel/subparallel seismic facies, which are associated, frequently, to the alluvial fans, fluvial-deltaic and lacustrine depositional systems, respectively. In this analysis, it was possible to recognize fifteen seismic horizons that correspond to sequence boundaries and to maximum flooding surfaces, which separates Transgressive to Regressive systems tracts. The recognition of transgressive-regressive cycles allowed to identify nine, possibly, 3a order deposicional sequences, related to the tectonic-sedimentary cycles. The structural analysis, in turn, was done at Baixo Vermelho seismic volume, which shows, clearly, the structural complexity printed in the area, mainly related to Carnaubais fault system, acting as an important fault system of the rift edge. This fault system is characterized by a main arrangement of normal faults with trend NE-SO, where Carnaubais Fault represents the maximum expression of these lineations. Carnaubais Fault corresponds to a fault with typically listric geometry, with general trend N70?E, dipping to northwest. It is observed, throughout all the seismic volume, with variations in its surface, which had conditioned, in its evolutive stages, the formation of innumerable structural features that normally are identified in Pendencia Formation. In this unit, part of these features is related to the formation of longitudinal foldings (rollover structures and distentional folding associated), originated by the displacement of the main fault plan, propitiating variations in geometry and thickness of the adjacent layers, which had been deposited at the same time. Other structural features are related to the secondary faultings, which could be synthetic or antithetic to Carnaubais Fault. In a general way, these faults have limited lateral continuity, with listric planar format and, apparently, they play the role of the accomodation of the distentional deformation printed in the area. Thus, the interaction between the stratigraphic and structural analysis, based on an excellent quality of the used data, allowed to get one better agreement on the tectonicsedimentary evolution of the Valanginian-Barremian interval (Pend?ncia Formation) in the studied area / A ?rea de Baixo Vermelho, localizada na por??o norte do Graben de Umbuzeiro (Bacia Potiguar emersa), representa um exemplo t?pico de uma bacia do tipo rifte, caracterizada, em subsuperf?cie, pela seq??ncia sedimentar rifte, correlata ? Forma??o Pend?ncia (Valanginiano-Barremiano), e pelo Sistema de Falhas de Carnaubais. Dentro deste contexto, duas abordagens principais nortearam o estudo, a estratigr?fica e a estrutural, em que se lan?ou m?o da interpreta??o do volume s?smico 3D de Baixo Vermelho e de oito po?os explorat?rios da ?rea e adjac?ncias. A an?lise estratigr?fica do intervalo do Valanginiano ao Barremiano foi realizada em duas fases distintas, 1D e 2D, nas quais foram adaptados os conceitos b?sicos da estratigrafia de seq??ncias. Nestas fases, a an?lise individual de cada po?o e a correla??o entre os mesmos permitiu reconhecer as principais litof?cies presentes, interpretar os sistemas deposicionais vigentes e identificar as unidades gen?ticas e as superf?cies-chave de car?ter cronoestratigr?fico. As litof?cies analisadas constituem, predominantemente, conglomerados, arenitos, siltitos e folhelhos, ocorrendo, ainda, de forma subordinada, rochas carbon?ticas e margas. Com base nas associa??es destas litof?cies foram interpretados os sistemas deposicionais de leque aluvial, fl?vio-deltaico e lacustre. O sistema de leque aluvial ? composto, principalmente, por dep?sitos conglomer?ticos, os quais se desenvolveram, principalmente, na por??o sul da ?rea, estando diretamente associados ao Sistema de Falhas de Carnaubais. O sistema fl?viodeltaico, por sua vez, foi desencadeado, preferencialmente, na por??o noroeste da ?rea, na margem flexural, sendo caracterizado por arenitos grossos a finos intercalados a folhelhos e siltitos. Em contrapartida, o sistema lacustre, o mais dominante na ?rea investigada, ? formado principalmente por folhelhos que ocorrem, por vezes, intercalados a delgadas camadas de arenitos finos a muito finos, interpretados como dep?sitos turbid?ticos. As unidades da estratigrafia de seq??ncias reconhecidas nos po?os est?o representadas pelos conjuntos de parasseq??ncias, tratos de sistemas e seq??ncias deposicionais. Os conjuntos de parasseq??ncias, ora progradacionais, ora retrogradacionais, foram agrupados e relacionados aos tratos de sistemas. A predomin?ncia dos conjuntos de parassequ?ncias progradacionais (trend geral com engrossamento textural para o topo) caracteriza o Trato de Sistemas Regressivo, ao passo que a ocorr?ncia, com maior freq??ncia, dos conjuntos de parassequ?ncias retrogradacionais (trend geral com afinamento textural para o topo) representam o Trato de Sistemas Transgressivo. Na an?lise sismoestratigr?fica, as litof?cies descritas nos po?os foram relacionadas ?s sismof?cies ca?tica, progradacional e paralela/subparalela, as quais se associam, freq?entemente, aos sistemas de leques aluviais, fl?vio-deltaico e lacustre, respectivamente. Nesta an?lise foram mapeados quinze horizontes s?smicos que correspondem aos limites de seq??ncias deposicionais e ?s superf?cies de inunda??o m?xima, que separam o trato de sistemas transgressivo do regressivo. O reconhecimento de ciclos transgressivo-regressivo permitiu identificar nove seq??ncias deposicionais, possivelmente de 3a ordem, relacionadas a ciclos tectono-sedimentares. A an?lise estrutural, por sua vez, foi realizada no volume s?smico de Baixo Vermelho, que mostra, com clareza, a complexidade estrutural impressa na ?rea, relacionada, principalmente, ao Sistema de Falhas de Carnaubais, que atua como um importante sistema de falhas de borda de rifte. Este sistema de falhas ? caracterizado por um arranjo principal de falhas normais NE-SO, em que a Falha de Carnaubais representa a express?o m?xima destes lineamentos. A Falha de Carnaubais corresponde a uma falha com geometria tipicamente l?strica, direcionada segundo o trend geral N70?E, mergulhando para noroeste. Apresenta-se, ao longo de todo o volume s?smico, com varia??es em sua superf?cie, as quais condicionaram, em seus est?gios evolutivos, a forma??o de in?meras fei??es estruturais, que s?o comumente identificadas na Forma??o Pend?ncia. Nesta unidade, parte das fei??es est? relacionada ? forma??o de dobramentos longitudinais (estrutura do tipo rollover e dobramentos distensionais associados), decorrentes do deslocamento do plano da falha principal, propiciando varia??es na geometria e espessura dos estratos adjacentes, os quais foram depositados sincronicamente. Outras fei??es estruturais est?o relacionadas a falhamentos secund?rios, tanto sint?ticos quanto antit?ticos ? Falha de Carnaubais. De uma maneira geral, estas falhas t?m continuidade lateral limitada, com formato planar a l?strico e, aparentemente, desempenham o papel de acomoda??o da deforma??o distensional imposta na ?rea. Assim, a intera??o entre as an?lises estratigr?fica e estrutural, alicer?ados pela excelente qualidade dos dados utilizados, permitiu obter um melhor entendimento sobre a evolu??o tectono-sedimentar do intervalo Valanginiano ao Barremiano (Forma??o Pend?ncia) na ?rea de estudo

Made available in DSpace on 2015-03-13T17:08:18Z (GMT). No. of bitstreams: 1 FabioEMR_Capa_ate_Cap3.pdf: 2956379 bytes, checksum: e1a356dd8141f0ac9ce3d477be9710dc (MD5) Previous issue date: 2009-02-27 / This study has as a main objective to make a detailed stratigraphic analysis of the Aptian-Albian interval in the east part of Araripe Basin, NE of Brazil which correspond, litostratigraphically, to Rio Da Batateira, Crato, Ipubi and Romualdo formations. The stratigraphic analysis was based on three different stages, the 1D, 2D and 3D analysis; these ones were adapted to the sequence stratigraphy concepts in order to create a chronostratigraphic framework for the study area within the basin. The database used in the present study contains field and well information, wells that belong to Santana Project, carried out by the Minist?rio de Minas e Energia- DNPM- CPRM from 1977 to 1978. The analysis 1D, which was done separately for each well and outcrop allowed the recognition of 13 sedimentary facies, mainly divided based on predominant litologies and sedimentary structures. Such facies are lithologically represented by pebble, sandstones, claystones, margas and evaporates; these facies are associated in order to characterize different depositional systems, that integrate from the continental environment (fluvial system and lacustre), paralic system (delta system and lagunar) to the marine environment (shelfenvironment). The first one, the fluvial system was divided into two subtypes: meandering fluvial system, characterized by fill channel and floodplain deposits; the facies of this system are associated vertically according to the textural thinning upward cycles (dirting-up trend pattern in well logs). Lacustrine environment is mainly related with the lithotypes of the Crato Formation, it shows a good distribution within the basin, been composed by green claystone deposits and calcareous laminated. Deltaic System represented by prodelta and delta front deposits which coarsening upward tendency. Lagunar system is characterised by the presence of anhydrite and gypsum deposits besides the black claystone deposits with vegetal fragments which do not contain a fauna typically marine. The marine platform system is composed by successions of black and gray claystone with fossiliferous fauna of Dinoflagellates (Spiniferites Mantell, Subtilisphaera Jain e Subtilisphaera Millipied genre) typical of this kind of depositional system. The sedimentary facies described are vertically arranged in cycles with progradational patterns which form textural coersening upward cycles and retrogradational, represented by textural thinning dowward cycles. Based in these cycles, in their stack pattern and the vertical change between these patterns, the systems tracks and the depositional sequences were recognized. The Low System Track (LST) and High System Track (HST) are composed by cycles with progradational stack pattern, whereas the Trangessive System Track (TST) is composed by retrogradational stack pattern cycles. The 2D stratigraphic analysis was done through the carrying out of two stratigraphic sections. For the selection of the datum the deepest maximum flooding surface was chosen, inside the Sequence 1, the execution of these sections allowed to understand the behaviour of six depositional systems along the study area, which were interpreted as cycles of second order or supercycles (cycles between 3 and 10 Ma), according to the Vail, et al (1977) classification. The Sequence 1, the oldest of the six identified is composed by the low, transgressive and high systems tracks. The first two system tracks are formed exclusively by fluvial deposits of the Rio da Batateira Formation whereas the third one includes deltaic and lacustrine deposits of the Crato Formation. The sequences 2 and 3 are formed by the transgressive systems tracks (lake spreading phase) and the highstand system track (lake backward phase). The TST of these sequences are formed by lacustrine deposits whereas HST contains deltaic deposits, indicating high rates of sedimentary supply at the time of it s deposition. The sequence 4 is composed by LST, TST and HST, The TST4 shows a significant fall of the lake base level, this track was developed in conditions of low relation between the creation rate of space of accommodation and the sedimentary influx. The TST4 marks the third phase of expansion of the lacustrine system in the section after the basin?s rift, the lacustrine system established in the previous track starts a backward phase in conditions that the sedimentary supply rate exceeds the creation rate of space accommodation. The sequence 5 was developed in two different phases, the first one is related with the latest expansion stage of the lake, (TST5), the basal track of this sequence. In this phase the base level of the lake rose considerably. The second phase (related to the TST5) indicates the end of the lacustrine domain in the Araripe Basin and the change to lagunar system ant tidal flat, with great portions in the supratidal. These systems were formed by restricted lagoons, with shallow level of water and with intermittent connections with the sea. This, was the phase when the Araripe Basin recorded the most several arid conditions of the whole interval studied, Aptian Albian, conditions that allow the formation of evaporitic deposits. The sequence 6 began its deposition after a significant fall of the sea (LST6). The sequence 6 is without any doubtlessly, the sequence that has deposits that prove the effective entrance of the sea into the Araripe Basin. The TST6, end of this sequence, represents the moment which the sea reaches its maximum level during the Aptian Albian time. The stratigraphic analysis of the Aptian Albian interval made possible the understanding that the main control in the development of the depositional sequences recognized in the Araripe Basin were the variations of the local base level, which are controlled itself by the climate changes / O presente trabalho tem como objetivo principal realizar uma an?lise estratigr?fica detalhada do intervalo Aptiano ao Albiano na parte leste da Bacia do Araripe, NE do Brasil, o qual corresponde, litoestratigraficamente, ?s forma??es Rio da Batateira, Crato, Ipub? e Romualdo. A an?lise estratigr?fica envolveu tr?s etapas distintas, a an?lise 1D, 2D e 3D, nas quais foram adaptados os conceitos da estratigrafia de seq??ncias visando elaborar um arcabou?o de car?ter cronoestratigr?fico para a por??o estudada da bacia. Tal estudo contou com uma base de dados integrada por informa??o de campo e de po?os pertencentes ao projeto Santana, realizado pelo Minist?rio de Minas e Energia- DNPM- CPRM nos anos de 1977 e 1978. A an?lise 1D, por meio da an?lise individual de cada afloramento e po?o, permitiu o reconhecimento de 13 f?cies sedimentares, individualizadas com base principalmente nas litologias predominantes e nas estruturas sedimentares. Tais f?cies s?o representadas litologicamente por conglomerados, arenitos, pelitos, calc?rios, margas e evaporitos. As mesmas se associam de forma a caracterizar diferentes sistemas deposicionais, que integram desde o ambiente continental (sistemas fluvial e lacustre), ambiente par?lico (sistemas deltaico e lagunar) at? o ambiente marinho (sistema plataformal). O primeiro deles, o sistema fluvial, foi dividido em dois sub-tipos: o sistema fluvial meandrante, caracterizado por dep?sitos de preenchimento de canal e dep?sitos de plan?cie de inunda??o, e o sistema fluvial entrela?ado formado principalmente por dep?sitos de preenchimento de canal; as f?cies deste sistema se associam verticalmente segundo ciclos de afinamento textural para o topo (padr?o em sino nos perfis geof?sicos). O sistema lacustre, relacionado principalmente aos lit?tipos da Forma??o Crato, apresenta uma boa distribui??o na bacia, sendo composto por dep?sitos de pelitos verdes e calc?rios laminados. O sistema deltaico, representado por dep?sitos de prodelta e de frente deltaica, os quais se disp?em verticalmente em ciclos com granocresc?ncia para o topo (padr?o em sino invertido nos perfis geof?sicos). O sistema lagunar caracteriza-se pela presen?a de dep?sitos de anidrita e gipsita, al?m dos dep?sitos de pelitos negros com restos vegetais, os quais n?o cont?m uma fauna tipicamente marinha. O sistema de plataforma marinha ? composto por sucess?es de pelitos pretos e cinza com faunas fossiliferas de Dinoflagelados (g?neros Spiniferites Mantell, Subtilisphaera Jain e Subtilisphaera Millipied), t?picas de este tipo de sistema deposicional. As f?cies sedimentares descritas se arranjam verticalmente de forma a compor ciclos com padr?es de empilhamento progradacional, os quais formam ciclos com engrossamento textural para o topo, e retrogradacional, representados por ciclos com afinamento textural para o topo. Com base nestes ciclos, em seus padr?es de empilhamento e na mudan?a verticais entre estes padr?es, foram reconhecidos os tratos de sistemas e as seq??ncias deposicionais. Os tratos de sistemas de N?vel Baixo e o de N?vel Alto s?o compostos por ciclos com padr?o de empilhamento progradacional; o Trato de Sistemas Transgressivo, por sua vez, ? formado por ciclos com padr?o de empilhamento retrogradacional. A an?lise estratigr?fica 2D foi elaborada por meio da realiza??o de duas se??es estratigr?ficas. Para a escolha do datum foi privilegiada a superf?cie de m?xima inunda??o mais basal, interna ? Seq??ncia 1. A elabora??o destas se??es possibilitou compreender o comportamento de seis seq??ncias deposicionais ao longo da ?rea de estudo, as quais foram interpretadas como ciclos de segunda ordem ou superciclos (ciclos com dura??es entre 3 e 10 Ma), segundo a classifica??o de Vail, et al (1977). A Seq??ncia 1, mais antiga das seis seq??ncias identificadas, ? composta pelos tratos de sistemas de N?vel Baixo, Transgressivo e de N?vel Alto. Os dois primeiros tratos s?o formados exclusivamente pelos dep?sitos fluviais da Forma??o Rio da Batateira, ao passo que o terceiro inclui dep?sitos deltaicos e lacustres da Forma??o Crato. As seq??ncias 2 e 3 s?o formadas pelos tratos de sistemas Transgressivo (TST; fase de expans?o do lago) e de N?vel Alto (TSNA; fase retra??o do lago). Os TST s destas seq??ncias s?o formados por dep?sitos lacustres, ao passo que os TSNA s cont?m dep?sitos deltaicos, indicando assim condi??es de alta taxa de suprimento sedimentar na ?poca da deposi??o deste. A seq??ncia 4 ? formada pelos tratos de sistemas de N?vel Baixo (TSNA), Transgressivo e de N?vel Alto. O TSNB registra uma queda importante do n?vel base do lago; este trato se desenvolveu em condi??es de baixa raz?o entre a taxa de cria??o de espa?o de acomoda??o e a taxa de influxo sedimentar. O TST marca a terceira fase de expans?o do sistema lacustre na se??o p?s rifte da bacia; o sistema lacustre implantado no trato anterior inicia uma fase de retra??o em condi??es em que a taxa de aporte sedimentar passa a suplantar a de cria??o de espa?o de acomoda??o. A seq??ncia 5 desenvolveu-se em duas fases distintas. A primeira relaciona-se com a ?ltima etapa de expans?o do lago, (TST), trato basal desta seq??ncia. Nesta fase, o n?vel base do lago subiu consideravelmente. A segunda fase, relacionada ao TSNA), indica o final do dom?nio lacustre na Bacia do Araripe e a mudan?a para sistemas lagunares e de plan?cie de mar?, com grande desenvolvimento das por??es de supramar?. Estes sistemas eram formados por lagunas restritas, com l?mina de ?gua rasa, e com conex?o intermitente com o mar. Esta foi a fase em que a Bacia do Araripe registrou as mais severas condi??es de aridez de todo intervalo estudado, Aptiano ao Albiano, condi??es estas que propiciaram a forma??o de dep?sitos evapor?ticos. A seq??ncia 6 iniciou sua deposi??o ap?s uma queda significativa do incipiente mar (TSNB). Esta seq??ncia ?, indubitavelmente, a que cont?m os dep?sitos que comprovam a efetiva entrada do mar na Bacia do Araripe. O TST, trato final desta seq??ncia, representa o momento em que o n?vel do mar atingiu o seu m?ximo durante todo o intervalo Aptiano ao Albiano. A an?lise estratigr?fica do intervalo Aptiano ao Albiano permitiu compreender que o controle principal no desenvolvimento das seq??ncias deposicionais reconhecidas na Bacia do Araripe foram ?s varia??es do n?vel de base local, as quais s?o controladas, por sua vez, pelas mudan?as clim?ticas